This insufferable work tries to cover some holes on previous threading implementation from yuzu's team, starting with Windows and Linux reordering of priorities (NICE), reworks previous Android's threading and cpu affinity with adpf, adjust emulated clocks/gpu for better "accuracy" with their work, bumps android minSDK for all flavors, legacy will now work with AP 29 to cover A10 - A12, standard will reach A13 as base and finally the optimized build will come with API 35, mostly targeted on devices with A15 support and newer, NDK and AGP wasn't upgraded yet. The performance cost efficiency have been improved based on device power configuration; preventing overheating if certain devices tended to fall into NICE0 (not allocated threads priority, all task ran with higher priority, 11 tasks running within the limited 2 - 7 threads available on the most common configuration 1x3x4 or 1x4x3).
Reviewed-on: https://git.eden-emu.dev/eden-emu/eden/pulls/4254
This implements MWAITX and WAITPKG extensions (umonitor, mwait) for CPUs that support them.
Reduces wait times and bypasses the timing stuff from the OS that is slow (windows notably). generally it should answer within 0.2 to 0.5 microsecs (since most requests wait for that long).
Also does a general rework of static ctors and stuff
Signed-off-by: lizzie <lizzie@eden-emu.dev>
Reviewed-on: https://git.eden-emu.dev/eden-emu/eden/pulls/3984
Reviewed-by: MaranBr <maranbr@eden-emu.dev>
Reviewed-by: crueter <crueter@eden-emu.dev>
Amaterasu from Discord asked about why nvnWindowGetNumActiveTextures returns 0 - after researching the console output it was asking for `DefaultDataSpace` (enum val 12) after some tests with the mod and debugging the console, this is my one-liner solution.
Reviewed-on: https://git.eden-emu.dev/eden-emu/eden/pulls/3956
Reviewed-by: Lizzie <lizzie@eden-emu.dev>
Reviewed-by: CamilleLaVey <camillelavey99@gmail.com>
- our logging code was bigger than spdlog itself, why???? just keep it simple
- fix issues when logging before logging system is even started
- removes the "initialized logging twice" issue
- removes uneeded indirection in file logging
- uses direct formatting instead of jumping hoopla-around the fmt::format() ressult
- code duplication and dead code removal as usual
I did explore dup2() but I think it's not worth the hassle
I did try `fwopen()` but it's better if things are just kept as-is.
there is a lot of noise because I removed a bunch of redundant files on logging and just put everything in one file
now normally this wouldn't be a good idea, however consider: the complexity of logging; it's less than 500 lines... does it really need a whole subsystem?!?!?! ITS JUST LOGGING
Signed-off-by: lizzie <lizzie@eden-emu.dev>
Reviewed-on: https://git.eden-emu.dev/eden-emu/eden/pulls/3688
Reviewed-by: crueter <crueter@eden-emu.dev>
Reviewed-by: DraVee <chimera@dravee.dev>
Reviewed-by: CamilleLaVey <camillelavey99@gmail.com>
Co-authored-by: lizzie <lizzie@eden-emu.dev>
Co-committed-by: lizzie <lizzie@eden-emu.dev>
This should fix the issue with, for example, ToTK running at 60 FPS when overlay applet is running.
This also should always run the overlay as actual overlay and not in the back.
Stubs RequestListSummaryOverlayNotifications in friends
Syncs Language of the Emulator, when setting language, this is used in Starter Applet
Reviewed-on: https://git.eden-emu.dev/eden-emu/eden/pulls/3123
Reviewed-by: CamilleLaVey <camillelavey99@gmail.com>
Reviewed-by: Caio Oliveira <caiooliveirafarias0@gmail.com>
Co-authored-by: Maufeat <sahyno1996@gmail.com>
Co-committed-by: Maufeat <sahyno1996@gmail.com>
Adds fully functional overlay display.
- Enable Overlay Applet via "View" -> "Enable Overlay Display Applet"
- Open the overlay by pressing the home button for over 1s
- Can adjust volume
- Can toggle airplane mode (if on WiFi, maybe if overlay is enabled pretend to be on WiFi?)
- Future TODO(?): Adjust Brightness implementation for host system
- Inputs are properly registered. e.g. if overlay open, application does not register inputs.
You can control volume and airplane mode outside of the emulator window
Reviewed-on: https://git.eden-emu.dev/eden-emu/eden/pulls/3080
Reviewed-by: CamilleLaVey <camillelavey99@gmail.com>
Reviewed-by: crueter <crueter@eden-emu.dev>
Co-authored-by: Maufeat <sahyno1996@gmail.com>
Co-committed-by: Maufeat <sahyno1996@gmail.com>
This rewrite should improve performance with the buffer history by changing the complexity level to O(1).
Replace std::vector with std::array to ensure that elements are allocated on the stack rather than on the free store.
Avoid expensive resizing at runtime.
Adjust buffer states at the right locations.
Tightly pack the BufferHistoryInfo struct to ensure that it only occupies 28 bytes.
Reviewed-on: https://git.eden-emu.dev/eden-emu/eden/pulls/528
Co-authored-by: SDK-Chan <sdkchan@eden-emu.dev>
Co-committed-by: SDK-Chan <sdkchan@eden-emu.dev>
Co-authored-by: Maufeat <sahyno1996@gmail.com>
Co-authored-by: CamilleLaVey <camillelavey99@gmail.com>
Reviewed-on: https://git.eden-emu.dev/eden-emu/eden/pulls/82
This commit adds a working implementation of the `GetBufferHistory` transaction in `BufferQueueProducer`, removing the previous stub.
Adapted by Jarrod Norwell for Sudachi, this implementation references the behavior in Ryujinx; commit rescued by Maufeat and another Eden teammate from Sudachi's reference, fixed and adapted for Eden usage.
It helps improve compatibility with Unreal Engine 4 titles and others that depend on proper surface history tracking for rendering pipelines, especially with regard to lighting, bloom, and alpha transitions.
Functionality has been tested for stability and does not introduce regressions, though further validation is recommended.
Co-authored-by: Maufeat <maufeat@eden-emu.dev>
Co-committed-by: Maufeat <maufeat@eden-emu.dev>
crueter
Maufeat
CamilleLaVey
lizzie
MaranBr
John
Gamer64
SDK-Chan
Caio Oliveira
Maufeat
Liam
liamwhite
Fernando Sahmkow