[externals] Require httplib >=0.18.7

This is the version in Trixie and is thus far the oldest known version that works. We know for a fact that Bookworm's doesn't work, so drop that entirely. Signed-off-by: crueter <crueter@eden-emu.dev>
2026-08-14 12:56:09 +00:00 · 2026-04-01 14:56:35 -04:00
496 changed files with 25226 additions and 27015 deletions
@@ -0,0 +1,116 @@
+#!/bin/bash -e
+
+# SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+case "$1" in
+amd64 | "")
+    echo "Making amd64-v3 optimized build of Eden"
+    ARCH="amd64_v3"
+    ARCH_FLAGS="-march=x86-64-v3"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=v3)
+    ;;
+steamdeck | zen2)
+    echo "Making Steam Deck (Zen 2) optimized build of Eden"
+    ARCH="steamdeck"
+    ARCH_FLAGS="-march=znver2 -mtune=znver2"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=zen2 -DYUZU_SYSTEM_PROFILE=steamdeck)
+    ;;
+rog-ally | allyx | zen4)
+    echo "Making ROG Ally X (Zen 4) optimized build of Eden"
+    ARCH="rog-ally-x"
+    ARCH_FLAGS="-march=znver4 -mtune=znver4"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=zen2 -DYUZU_SYSTEM_PROFILE=steamdeck)
+    ;;
+legacy)
+    echo "Making amd64 generic build of Eden"
+    ARCH=amd64
+    ARCH_FLAGS="-march=x86-64 -mtune=generic"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=generic)
+    ;;
+aarch64)
+    echo "Making armv8-a build of Eden"
+    ARCH=aarch64
+    ARCH_FLAGS="-march=armv8-a -mtune=generic -w"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=generic)
+    ;;
+armv9)
+    echo "Making armv9-a build of Eden"
+    ARCH=armv9
+    ARCH_FLAGS="-march=armv9-a -mtune=generic -w"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=armv9)
+    ;;
+native)
+    echo "Making native build of Eden"
+    ARCH="$(uname -m)"
+    ARCH_FLAGS="-march=native -mtune=native"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=native)
+    ;;
+*)
+    echo "Invalid target $1 specified, must be one of native, amd64, steamdeck, zen2, allyx, rog-ally, zen4, legacy, aarch64, armv9"
+    exit 1
+    ;;
+esac
+
+export ARCH_FLAGS="$ARCH_FLAGS -O3"
+
+if [ -z "$NPROC" ]; then
+    NPROC="$(nproc)"
+fi
+
+if [ "$1" != "" ]; then shift; fi
+
+if [ "$TARGET" = "appimage" ]; then
+    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DCMAKE_INSTALL_PREFIX=/usr -DYUZU_ROOM=ON -DYUZU_ROOM_STANDALONE=OFF -DYUZU_CMD=OFF)
+else
+    # For the linux-fresh verification target, verify compilation without PCH as well.
+    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DYUZU_USE_PRECOMPILED_HEADERS=OFF)
+fi
+
+
+if [ "$DEVEL" != "true" ]; then
+    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DENABLE_UPDATE_CHECKER=ON)
+fi
+
+if [ "$USE_WEBENGINE" = "true" ]; then
+    WEBENGINE=ON
+else
+    WEBENGINE=OFF
+fi
+
+if [ "$USE_MULTIMEDIA" = "false" ]; then
+    MULTIMEDIA=OFF
+else
+    MULTIMEDIA=ON
+fi
+
+if [ -z "$BUILD_TYPE" ]; then
+    export BUILD_TYPE="Release"
+fi
+
+export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" $@)
+
+mkdir -p build && cd build
+cmake .. -G Ninja \
+    -DCMAKE_BUILD_TYPE="$BUILD_TYPE" \
+    -DENABLE_QT_TRANSLATION=ON \
+    -DUSE_DISCORD_PRESENCE=ON \
+    -DCMAKE_CXX_FLAGS="$ARCH_FLAGS" \
+    -DCMAKE_C_FLAGS="$ARCH_FLAGS" \
+    -DYUZU_USE_BUNDLED_QT=OFF \
+    -DYUZU_USE_BUNDLED_SDL2=OFF \
+    -DYUZU_USE_EXTERNAL_SDL2=ON \
+    -DYUZU_TESTS=OFF \
+    -DYUZU_USE_QT_MULTIMEDIA=$MULTIMEDIA \
+    -DYUZU_USE_QT_WEB_ENGINE=$WEBENGINE \
+    -DYUZU_USE_FASTER_LD=ON \
+    -DENABLE_LTO=ON \
+    "${EXTRA_CMAKE_FLAGS[@]}"
+
+ninja -j${NPROC}
+
+if [ -d "bin/Release" ]; then
+    strip -s bin/Release/*
+else
+    strip -s bin/*
+fi
@@ -0,0 +1,250 @@
+AppRun
+eden.desktop
+dev.eden_emu.eden.desktop
+shared/bin/eden
+shared/lib/lib.path
+shared/lib/ld-linux-x86-64.so.2
+shared/lib/libQt6Widgets.so.6.4.2
+shared/lib/libQt6DBus.so.6.4.2
+shared/lib/libudev.so.1.7.5
+shared/lib/libbrotlienc.so.1.0.9
+shared/lib/libbrotlidec.so.1.0.9
+shared/lib/libssl.so.3
+shared/lib/libcrypto.so.3
+shared/lib/libavcodec.so.59.37.100
+shared/lib/libavutil.so.57.28.100
+shared/lib/libQt6Gui.so.6.4.2
+shared/lib/libQt6Core.so.6.4.2
+shared/lib/libstdc++.so.6.0.30
+shared/lib/libm.so.6
+shared/lib/libgcc_s.so.1
+shared/lib/libc.so.6
+shared/lib/libdbus-1.so.3.32.4
+shared/lib/libbrotlicommon.so.1.0.9
+shared/lib/libswresample.so.4.7.100
+shared/lib/libvpx.so.7.1.0
+shared/lib/libwebpmux.so.3.0.10
+shared/lib/libwebp.so.7.1.5
+shared/lib/liblzma.so.5.4.1
+shared/lib/libdav1d.so.6.6.0
+shared/lib/librsvg-2.so.2.48.0
+shared/lib/libgobject-2.0.so.0.7400.6
+shared/lib/libglib-2.0.so.0.7400.6
+shared/lib/libcairo.so.2.11600.0
+shared/lib/libzvbi.so.0.13.2
+shared/lib/libz.so.1.2.13
+shared/lib/libsnappy.so.1.1.9
+shared/lib/libaom.so.3.6.0
+shared/lib/libcodec2.so.1.0
+shared/lib/libgsm.so.1.0.19
+shared/lib/libjxl.so.0.7.0
+shared/lib/libjxl_threads.so.0.7.0
+shared/lib/libmp3lame.so.0.0.0
+shared/lib/libopenjp2.so.2.5.0
+shared/lib/libopus.so.0.8.0
+shared/lib/librav1e.so.0.5.1
+shared/lib/libshine.so.3.0.1
+shared/lib/libspeex.so.1.5.2
+shared/lib/libSvtAv1Enc.so.1.4.1
+shared/lib/libtheoraenc.so.1.1.2
+shared/lib/libtheoradec.so.1.1.4
+shared/lib/libtwolame.so.0.0.0
+shared/lib/libvorbis.so.0.4.9
+shared/lib/libvorbisenc.so.2.0.12
+shared/lib/libx264.so.164
+shared/lib/libx265.so.199
+shared/lib/libxvidcore.so.4.3
+shared/lib/libva.so.2.1700.0
+shared/lib/libmfx.so.1.35
+shared/lib/libva-drm.so.2.1700.0
+shared/lib/libva-x11.so.2.1700.0
+shared/lib/libvdpau.so.1.0.0
+shared/lib/libX11.so.6.4.0
+shared/lib/libdrm.so.2.4.0
+shared/lib/libOpenCL.so.1.0.0
+shared/lib/libEGL.so.1.1.0
+shared/lib/libfontconfig.so.1.12.0
+shared/lib/libxkbcommon.so.0.0.0
+shared/lib/libGLX.so.0.0.0
+shared/lib/libOpenGL.so.0.0.0
+shared/lib/libpng16.so.16.39.0
+shared/lib/libharfbuzz.so.0.60000.0
+shared/lib/libmd4c.so.0.4.8
+shared/lib/libfreetype.so.6.18.3
+shared/lib/libicui18n.so.72.1
+shared/lib/libicuuc.so.72.1
+shared/lib/libdouble-conversion.so.3.1
+shared/lib/libb2.so.1.0.4
+shared/lib/libpcre2-16.so.0.11.2
+shared/lib/libzstd.so.1.5.4
+shared/lib/libsystemd.so.0.35.0
+shared/lib/libsoxr.so.0.1.2
+shared/lib/libcairo-gobject.so.2.11600.0
+shared/lib/libgdk_pixbuf-2.0.so.0.4200.10
+shared/lib/libgio-2.0.so.0.7400.6
+shared/lib/libxml2.so.2.9.14
+shared/lib/libpangocairo-1.0.so.0.5000.12
+shared/lib/libpango-1.0.so.0.5000.12
+shared/lib/libffi.so.8.1.2
+shared/lib/libpcre2-8.so.0.11.2
+shared/lib/libpixman-1.so.0.42.2
+shared/lib/libxcb-shm.so.0.0.0
+shared/lib/libxcb.so.1.1.0
+shared/lib/libxcb-render.so.0.0.0
+shared/lib/libXrender.so.1.3.0
+shared/lib/libXext.so.6.4.0
+shared/lib/libhwy.so.1.0.3
+shared/lib/liblcms2.so.2.0.14
+shared/lib/libogg.so.0.8.5
+shared/lib/libnuma.so.1.0.0
+shared/lib/libpthread.so.0
+shared/lib/libXfixes.so.3.1.0
+shared/lib/libX11-xcb.so.1.0.0
+shared/lib/libxcb-dri3.so.0.1.0
+shared/lib/libGLdispatch.so.0.0.0
+shared/lib/libexpat.so.1.8.10
+shared/lib/libgraphite2.so.3.2.1
+shared/lib/libicudata.so.72.1
+shared/lib/libgomp.so.1.0.0
+shared/lib/libcap.so.2.66
+shared/lib/libgcrypt.so.20.4.1
+shared/lib/liblz4.so.1.9.4
+shared/lib/libgmodule-2.0.so.0.7400.6
+shared/lib/libjpeg.so.62.3.0
+shared/lib/libmount.so.1.1.0
+shared/lib/libselinux.so.1
+shared/lib/libpangoft2-1.0.so.0.5000.12
+shared/lib/libfribidi.so.0.4.0
+shared/lib/libthai.so.0.3.1
+shared/lib/libXau.so.6.0.0
+shared/lib/libXdmcp.so.6.0.0
+shared/lib/libgpg-error.so.0.33.1
+shared/lib/libblkid.so.1.1.0
+shared/lib/libdatrie.so.1.4.0
+shared/lib/libbsd.so.0.11.7
+shared/lib/libmd.so.0.0.5
+shared/lib/libvulkan.so.1.3.239
+share/vulkan/icd.d/intel_hasvk_icd.x86_64.json
+shared/lib/libvulkan_intel_hasvk.so
+shared/lib/libwayland-client.so.0.21.0
+shared/lib/libxcb-present.so.0.0.0
+shared/lib/libxcb-xfixes.so.0.0.0
+shared/lib/libxcb-sync.so.1.0.0
+shared/lib/libxcb-randr.so.0.1.0
+shared/lib/libxshmfence.so.1.0.0
+share/vulkan/icd.d/intel_icd.x86_64.json
+shared/lib/libvulkan_intel.so
+share/vulkan/icd.d/lvp_icd.x86_64.json
+shared/lib/libvulkan_lvp.so
+shared/lib/libLLVM-15.so.1
+shared/lib/libedit.so.2.0.70
+shared/lib/libz3.so.4
+shared/lib/libtinfo.so.6.4
+share/vulkan/icd.d/radeon_icd.x86_64.json
+shared/lib/libvulkan_radeon.so
+shared/lib/libdrm_amdgpu.so.1.0.0
+shared/lib/libelf-0.188.so
+shared/lib/libVkLayer_MESA_device_select.so
+bin/qt.conf
+shared/lib/qt6/plugins/platforms/libqeglfs.so
+shared/lib/qt6/plugins/platforms/libqlinuxfb.so
+shared/lib/qt6/plugins/platforms/libqminimal.so
+shared/lib/qt6/plugins/platforms/libqminimalegl.so
+shared/lib/qt6/plugins/platforms/libqoffscreen.so
+shared/lib/qt6/plugins/platforms/libqvkkhrdisplay.so
+shared/lib/qt6/plugins/platforms/libqvnc.so
+shared/lib/qt6/plugins/platforms/libqwayland-egl.so
+shared/lib/qt6/plugins/platforms/libqwayland-generic.so
+shared/lib/qt6/plugins/platforms/libqxcb.so
+shared/lib/libQt6WaylandClient.so.6.4.2
+shared/lib/libwayland-cursor.so.0.21.0
+shared/lib/qt6/plugins/platformthemes/libqgtk3.so
+shared/lib/libgtk-3.so.0.2406.32
+shared/lib/libgdk-3.so.0.2406.32
+shared/lib/libatk-1.0.so.0.24609.1
+shared/lib/libepoxy.so.0.0.0
+shared/lib/libXi.so.6.1.0
+shared/lib/libatk-bridge-2.0.so.0.0.0
+shared/lib/libwayland-egl.so.1.21.0
+shared/lib/libXcursor.so.1.0.2
+shared/lib/libXdamage.so.1.1.0
+shared/lib/libXcomposite.so.1.0.0
+shared/lib/libXrandr.so.2.2.0
+shared/lib/libXinerama.so.1.0.0
+shared/lib/libdl.so.2
+shared/lib/libatspi.so.0.0.1
+share/glib-2.0/schemas/gschemas.compiled
+shared/lib/gio/modules/giomodule.cache
+shared/lib/gio/modules/libdconfsettings.so
+shared/lib/gio/modules/libgvfsdbus.so
+shared/lib/gvfs/libgvfscommon.so
+share/X11/xkb/rules/evdev
+share/X11/xkb/keycodes/evdev
+share/X11/xkb/keycodes/aliases
+share/X11/xkb/types/complete
+share/X11/xkb/types/basic
+share/X11/xkb/types/mousekeys
+share/X11/xkb/types/pc
+share/X11/xkb/types/iso9995
+share/X11/xkb/types/level5
+share/X11/xkb/types/extra
+share/X11/xkb/types/numpad
+share/X11/xkb/compat/complete
+share/X11/xkb/compat/basic
+share/X11/xkb/compat/ledcaps
+share/X11/xkb/compat/lednum
+share/X11/xkb/compat/iso9995
+share/X11/xkb/compat/mousekeys
+share/X11/xkb/compat/accessx
+share/X11/xkb/compat/misc
+share/X11/xkb/compat/ledscroll
+share/X11/xkb/compat/xfree86
+share/X11/xkb/compat/level5
+share/X11/xkb/compat/caps
+share/X11/xkb/symbols/pc
+share/X11/xkb/symbols/srvr_ctrl
+share/X11/xkb/symbols/keypad
+share/X11/xkb/symbols/altwin
+share/X11/xkb/symbols/us
+share/X11/xkb/symbols/inet
+shared/lib/qt6/plugins/platforminputcontexts/libcomposeplatforminputcontextplugin.so
+shared/lib/qt6/plugins/platforminputcontexts/libibusplatforminputcontextplugin.so
+shared/lib/qt6/plugins/iconengines/libqsvgicon.so
+shared/lib/qt6/plugins/imageformats/libqgif.so
+shared/lib/qt6/plugins/imageformats/libqico.so
+shared/lib/qt6/plugins/imageformats/libqjpeg.so
+shared/lib/qt6/plugins/imageformats/libqsvg.so
+shared/lib/libQt6Svg.so.6.4.2
+etc/fonts/fonts.conf
+shared/lib/qt6/plugins/wayland-shell-integration/libfullscreen-shell-v1.so
+shared/lib/qt6/plugins/wayland-shell-integration/libivi-shell.so
+shared/lib/qt6/plugins/wayland-shell-integration/libqt-shell.so
+shared/lib/qt6/plugins/wayland-shell-integration/libwl-shell-plugin.so
+shared/lib/qt6/plugins/wayland-shell-integration/libxdg-shell.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libdmabuf-server.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libdrm-egl-server.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libqt-plugin-wayland-egl.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libshm-emulation-server.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libvulkan-server.so
+shared/lib/libQt6WaylandEglClientHwIntegration.so.6.4.2
+shared/lib/libQt6OpenGL.so.6.4.2
+share/glvnd/egl_vendor.d/50_mesa.json
+shared/lib/libEGL_mesa.so.0.0.0
+shared/lib/libgbm.so.1.0.0
+shared/lib/libglapi.so.0.0.0
+shared/lib/libxcb-dri2.so.0.0.0
+shared/lib/libwayland-server.so.0.21.0
+shared/lib/dri/swrast_dri.so
+shared/lib/libsensors.so.5.0.0
+shared/lib/libdrm_radeon.so.1.0.1
+shared/lib/libdrm_nouveau.so.2.0.0
+shared/lib/libdrm_intel.so.1.0.0
+shared/lib/libpciaccess.so.0.11.1
+shared/lib/qt6/plugins/wayland-decoration-client/libbradient.so
+shared/lib/gtk-3.0/modules/libcanberra-gtk3-module.so
+shared/lib/libcanberra-gtk3.so.0.1.9
+shared/lib/libcanberra.so.0.2.5
+shared/lib/libvorbisfile.so.3.3.8
+shared/lib/libtdb.so.1.4.8
+shared/lib/libltdl.so.7.3.2
+shared/lib/libXss.so.1.0.0
@@ -0,0 +1,153 @@
+#!/bin/sh -e
+
+# SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# This script assumes you're in the source directory
+
+export APPIMAGE_EXTRACT_AND_RUN=1
+export BASE_ARCH="$(uname -m)"
+
+SHARUN="https://github.com/VHSgunzo/sharun/releases/latest/download/sharun-${BASE_ARCH}-aio"
+URUNTIME="https://github.com/VHSgunzo/uruntime/releases/latest/download/uruntime-appimage-dwarfs-${BASE_ARCH}"
+
+case "$1" in
+    amd64|"")
+        echo "Packaging amd64-v3 optimized build of Eden"
+        ARCH="amd64_v3"
+        ;;
+    steamdeck|zen2)
+        echo "Packaging Steam Deck (Zen 2) optimized build of Eden"
+        ARCH="steamdeck"
+        ;;
+    rog-ally|allyx|zen4)
+        echo "Packaging ROG Ally X (Zen 4) optimized build of Eden"
+        ARCH="rog-ally-x"
+        ;;
+    legacy)
+        echo "Packaging amd64 generic build of Eden"
+        ARCH=amd64
+        ;;
+    aarch64)
+        echo "Packaging armv8-a build of Eden"
+        ARCH=aarch64
+        ;;
+    armv9)
+        echo "Packaging armv9-a build of Eden"
+        ARCH=armv9
+        ;;
+		native)
+        echo "Packaging native build of Eden"
+        ARCH="$BASE_ARCH"
+        ;;
+
+esac
+
+export BUILDDIR="$2"
+
+if [ "$BUILDDIR" = '' ]
+then
+	BUILDDIR=build
+fi
+
+EDEN_TAG=$(git describe --tags --abbrev=0)
+echo "Making \"$EDEN_TAG\" build"
+# git checkout "$EDEN_TAG"
+VERSION="$(echo "$EDEN_TAG")"
+
+# NOW MAKE APPIMAGE
+mkdir -p ./AppDir
+cd ./AppDir
+
+cp ../dist/dev.eden_emu.eden.desktop .
+cp ../dist/dev.eden_emu.eden.svg .
+
+ln -sf ./dev.eden_emu.eden.svg ./.DirIcon
+
+UPINFO='gh-releases-zsync|eden-emulator|Releases|latest|*.AppImage.zsync'
+
+if [ "$DEVEL" = 'true' ]; then
+	sed -i 's|Name=Eden|Name=Eden Nightly|' ./dev.eden_emu.eden.desktop
+ 	UPINFO="$(echo "$UPINFO" | sed 's|Releases|nightly|')"
+fi
+
+LIBDIR="/usr/lib"
+
+# Workaround for Gentoo
+if [ ! -d "$LIBDIR/qt6" ]
+then
+	LIBDIR="/usr/lib64"
+fi
+
+# Workaround for Debian
+if [ ! -d "$LIBDIR/qt6" ]
+then
+    LIBDIR="/usr/lib/${BASE_ARCH}-linux-gnu"
+fi
+
+# Bundle all libs
+
+wget --retry-connrefused --tries=30 "$SHARUN" -O ./sharun-aio
+chmod +x ./sharun-aio
+xvfb-run -a ./sharun-aio l -p -v -e -s -k \
+	../$BUILDDIR/bin/eden* \
+	$LIBDIR/lib*GL*.so* \
+	$LIBDIR/dri/* \
+	$LIBDIR/vdpau/* \
+	$LIBDIR/libvulkan* \
+	$LIBDIR/libXss.so* \
+	$LIBDIR/libdecor-0.so* \
+	$LIBDIR/libgamemode.so* \
+	$LIBDIR/qt6/plugins/audio/* \
+	$LIBDIR/qt6/plugins/bearer/* \
+	$LIBDIR/qt6/plugins/imageformats/* \
+	$LIBDIR/qt6/plugins/iconengines/* \
+	$LIBDIR/qt6/plugins/platforms/* \
+	$LIBDIR/qt6/plugins/platformthemes/* \
+	$LIBDIR/qt6/plugins/platforminputcontexts/* \
+	$LIBDIR/qt6/plugins/styles/* \
+	$LIBDIR/qt6/plugins/xcbglintegrations/* \
+	$LIBDIR/qt6/plugins/wayland-*/* \
+	$LIBDIR/pulseaudio/* \
+	$LIBDIR/pipewire-0.3/* \
+	$LIBDIR/spa-0.2/*/* \
+	$LIBDIR/alsa-lib/*
+
+rm -f ./sharun-aio
+
+# Prepare sharun
+if [ "$ARCH" = 'aarch64' ]; then
+	# allow the host vulkan to be used for aarch64 given the sad situation
+	echo 'SHARUN_ALLOW_SYS_VKICD=1' > ./.env
+fi
+
+# Workaround for Gentoo
+if [ -d "shared/libproxy" ]; then
+	cp shared/libproxy/* lib/
+fi
+
+ln -f ./sharun ./AppRun
+./sharun -g
+
+# turn appdir into appimage
+cd ..
+wget -q "$URUNTIME" -O ./uruntime
+chmod +x ./uruntime
+
+#Add udpate info to runtime
+echo "Adding update information \"$UPINFO\" to runtime..."
+./uruntime --appimage-addupdinfo "$UPINFO"
+
+echo "Generating AppImage..."
+./uruntime --appimage-mkdwarfs -f \
+	--set-owner 0 --set-group 0 \
+	--no-history --no-create-timestamp \
+	--categorize=hotness --hotness-list=.ci/linux/eden.dwfsprof \
+	--compression zstd:level=22 -S26 -B32 \
+	--header uruntime \
+    -N 4 \
+	-i ./AppDir -o Eden-"$VERSION"-"$ARCH".AppImage
+
+echo "Generating zsync file..."
+zsyncmake *.AppImage -u *.AppImage
+echo "All Done!"
@@ -0,0 +1,51 @@
+#!/bin/bash -ex
+
+# SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+if [ "$COMPILER" == "clang" ]
+then
+    EXTRA_CMAKE_FLAGS+=(
+        -DCMAKE_CXX_COMPILER=clang-cl
+        -DCMAKE_C_COMPILER=clang-cl
+        -DCMAKE_CXX_FLAGS="-O3"
+        -DCMAKE_C_FLAGS="-O3"
+    )
+
+    BUILD_TYPE="RelWithDebInfo"
+fi
+
+[ -z "$WINDEPLOYQT" ] && { echo "WINDEPLOYQT environment variable required."; exit 1; }
+
+echo $EXTRA_CMAKE_FLAGS
+
+mkdir -p build && cd build
+cmake .. -G Ninja \
+    -DCMAKE_BUILD_TYPE="${BUILD_TYPE:-Release}" \
+	-DENABLE_QT_TRANSLATION=ON \
+    -DUSE_DISCORD_PRESENCE=ON \
+    -DYUZU_USE_BUNDLED_SDL2=ON \
+    -DBUILD_TESTING=OFF \
+    -DYUZU_TESTS=OFF \
+    -DDYNARMIC_TESTS=OFF \
+    -DYUZU_CMD=OFF \
+    -DYUZU_ROOM_STANDALONE=OFF \
+    -DYUZU_USE_QT_MULTIMEDIA=${USE_MULTIMEDIA:-false} \
+    -DYUZU_USE_QT_WEB_ENGINE=${USE_WEBENGINE:-false} \
+    -DENABLE_LTO=ON \
+	-DCMAKE_EXE_LINKER_FLAGS=" /LTCG" \
+    -DYUZU_USE_BUNDLED_QT=${BUNDLE_QT:-false} \
+    -DUSE_CCACHE=${CCACHE:-false}  \
+    -DENABLE_UPDATE_CHECKER=${DEVEL:-true} \
+    "${EXTRA_CMAKE_FLAGS[@]}" \
+    "$@"
+
+ninja
+
+set +e
+rm -f bin/*.pdb
+set -e
+
+$WINDEPLOYQT --release --no-compiler-runtime --no-opengl-sw --no-system-dxc-compiler --no-system-d3d-compiler --dir pkg bin/eden.exe
+
+cp bin/* pkg
@@ -0,0 +1,18 @@
+GITDATE=$(git show -s --date=short --format='%ad' | tr -d "-")
+GITREV=$(git show -s --format='%h')
+
+ZIP_NAME="Eden-Windows-${ARCH}-${GITDATE}-${GITREV}.zip"
+
+ARTIFACTS_DIR="artifacts"
+PKG_DIR="build/pkg"
+
+mkdir -p "$ARTIFACTS_DIR"
+
+TMP_DIR=$(mktemp -d)
+
+cp -r "$PKG_DIR"/* "$TMP_DIR"/
+cp LICENSE* README* "$TMP_DIR"/
+
+7z a -tzip "$ARTIFACTS_DIR/$ZIP_NAME" "$TMP_DIR"/*
+
+rm -rf "$TMP_DIR"
@@ -3,8 +3,6 @@ name: Check Strings
 on:
  push:
    branches: [ master ]
-  pull_request:
-    branches: [ master ]

 jobs:
  check-strings:
@@ -12,7 +10,7 @@ jobs:
    steps:
      - uses: actions/checkout@v4
        with:
-          fetch-depth: 1
+          fetch-depth: 0

      - name: Find Unused Strings
        run: ./tools/unused-strings.sh
@@ -1,9 +1,9 @@
 name: tx-pull

 on:
-  #  tuesday, saturday at 2pm
+  # monday, wednesday, saturday at 2pm
  schedule:
-    - cron: '0 14 * * 2,6'
+    cron: '0 14 * * 1,3,6'
  workflow_dispatch:

 jobs:
@@ -1,54 +0,0 @@
-name: update-deps
-
-on:
-  #  saturday at noon
-  schedule:
-    - cron: '0 12 * * 6'
-  workflow_dispatch:
-
-jobs:
-  tx-update:
-    runs-on: source
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Update deps
-        run: |
-          git config --local user.name "Eden CI"
-          git config --local user.email "ci@eden-emu.dev"
-          git config --local user.signingkey "D57652791BB25D2A"
-          git config --local push.autoSetupRemote true
-
-          git remote set-url origin ci:eden-emu/eden.git
-
-          DATE=$(date +"%b %d")
-          echo "DATE=$DATE" >> "$GITHUB_ENV"
-
-          git switch -c update-deps-$DATE
-          tools/cpmutil.sh package update -ac
-          git push
-
-      - name: Create PR
-        run: |
-          TITLE="[externals] Dependency update for $DATE"
-          BODY="$(git show -s --format='%b')"
-          BASE=master
-          HEAD=update-deps-$DATE
-
-          cat << EOF > data.json
-          {
-            "base": "$BASE",
-            "body": "$BODY",
-            "head": "$HEAD",
-            "title": "$TITLE"
-          }
-          EOF
-
-          curl -X 'POST' \
-            'https://git.eden-emu.dev/api/v1/repos/eden-emu/eden/pulls' \
-            -H 'accept: application/json' \
-            -H 'Authorization: Bearer ${{ secrets.CI_FJ_TOKEN }}' \
-            -H 'Content-Type: application/json' \
-            -d "@data.json" --fail
@@ -0,0 +1,14 @@
+diff --git a/external/CMakeLists.txt b/external/CMakeLists.txt
+index eb4e69e..3155805 100644
+--- a/external/CMakeLists.txt
+++ b/external/CMakeLists.txt
+@@ -72,7 +72,8 @@ if (SPIRV_TOOLS_USE_MIMALLOC)
+   pop_variable(MI_BUILD_TESTS)
+ endif()
+ 
+-if (DEFINED SPIRV-Headers_SOURCE_DIR)
+# NetBSD doesn't have SPIRV-Headers readily available on system
+if (DEFINED SPIRV-Headers_SOURCE_DIR AND NOT ${CMAKE_SYSTEM_NAME} STREQUAL "NetBSD")
+   # This allows flexible position of the SPIRV-Headers repo.
+   set(SPIRV_HEADER_DIR ${SPIRV-Headers_SOURCE_DIR})
+ else()
@@ -0,0 +1,287 @@
+From 67bf3d1381b1faf59e87001d6156ba4e21cada14 Mon Sep 17 00:00:00 2001
+From: crueter <crueter@eden-emu.dev>
+Date: Mon, 29 Dec 2025 21:22:36 -0500
+Subject: [PATCH] [cmake] refactor: shared/static handling
+
+This significantly redoes the way shared and static libraries are
+handled. Now, it's controlled by two options: `SPIRV_TOOLS_BUILD_STATIC`
+and `SPIRV_TOOLS_BUILD_SHARED`.
+
+The default configuration (no `BUILD_SHARED_LIBS` set, options left at
+default) is to build shared ONLY if this is the master project, or
+static ONLY if this is a subproject (e.g. FetchContent, CPM.cmake). Also
+I should note that static-only (i.e. no shared) is now a supported
+target, this is done because projects including it as a submodule e.g.
+on Android or Windows may prefer this.
+
+Now the shared/static handling:
+- static ON, shared OFF: Only generates `.a` libraries.
+- static ON, shared ON: Generates `.a` libraries, but also
+  `libSPIRV-Tools.so`
+- static OFF, shared ON: Only generates `.so` libraries.
+
+Notable TODOs:
+- SPIRV-Tools-shared.pc seems redundant--how should we handle which one
+  to use in the case of distributions that distribute both types (MSYS2
+  for instance)?
+  * *Note: pkgconfig sucks at this and usually just leaves it up to the
+    user, so the optimal solution may indeed be doing absolutely
+    nothing.* CMake is unaffected :)
+- use namespaces in the CMake config files pleaaaaase
+
+This is going to change things a good bit for package maintainers, but
+cest la vie. It's for the greater good, I promise.
+
+Signed-off-by: crueter <crueter@eden-emu.dev>
+---
+ CMakeLists.txt        | 108 +++++++++++++++++++++++++-----------------
+ source/CMakeLists.txt |  62 ++++++++++++------------
+ 2 files changed, 94 insertions(+), 76 deletions(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 4d843b4d2f..07201f690f 100644
+--- a/CMakeLists.txt
+++ b/CMakeLists.txt
+@@ -14,6 +14,15 @@
+ 
+ cmake_minimum_required(VERSION 3.22.1)
+ 
+# master project detection--useful for FetchContent/submodule inclusion
+set(master_project OFF)
+set(subproject ON)
+
+if (NOT DEFINED PROJECT_NAME)
+  set(master_project ON)
+  set(subproject OFF)
+endif()
+
+ project(spirv-tools)
+ 
+ # Avoid a bug in CMake 3.22.1. By default it will set -std=c++11 for
+@@ -135,46 +144,49 @@ if (DEFINED SPIRV_TOOLS_EXTRA_DEFINITIONS)
+   add_definitions(${SPIRV_TOOLS_EXTRA_DEFINITIONS})
+ endif()
+ 
+-# Library build setting definitions:
+-#
+-# * SPIRV_TOOLS_BUILD_STATIC - ON or OFF - Defaults to ON.
+-#   If enabled the following targets will be created:
+-#     ${SPIRV_TOOLS}-static - STATIC library.
+-#                             Has full public symbol visibility.
+-#     ${SPIRV_TOOLS}-shared - SHARED library.
+-#                             Has default-hidden symbol visibility.
+-#     ${SPIRV_TOOLS}        - will alias to one of above, based on BUILD_SHARED_LIBS.
+-#   If disabled the following targets will be created:
+-#     ${SPIRV_TOOLS}        - either STATIC or SHARED based on SPIRV_TOOLS_LIBRARY_TYPE.
+-#                             Has full public symbol visibility.
+-#     ${SPIRV_TOOLS}-shared - SHARED library.
+-#                             Has default-hidden symbol visibility.
+-#
+-# * SPIRV_TOOLS_LIBRARY_TYPE - SHARED or STATIC.
+-#   Specifies the library type used for building SPIRV-Tools libraries.
+-#   Defaults to SHARED when BUILD_SHARED_LIBS=1, otherwise STATIC.
+-#
+-# * SPIRV_TOOLS_FULL_VISIBILITY - "${SPIRV_TOOLS}-static" or "${SPIRV_TOOLS}"
+-#   Evaluates to the SPIRV_TOOLS target library name that has no hidden symbols.
+-#   This is used by internal targets for accessing symbols that are non-public.
+-#   Note this target provides no API stability guarantees.
+-#
+-# Ideally, all of these will go away - see https://github.com/KhronosGroup/SPIRV-Tools/issues/3909.
+-option(ENABLE_EXCEPTIONS_ON_MSVC "Build SPIRV-TOOLS with c++ exceptions enabled in MSVC" ON)
+-option(SPIRV_TOOLS_BUILD_STATIC "Build ${SPIRV_TOOLS}-static target. ${SPIRV_TOOLS} will alias to ${SPIRV_TOOLS}-static or ${SPIRV_TOOLS}-shared based on BUILD_SHARED_LIBS" ON)
+-if(SPIRV_TOOLS_BUILD_STATIC)
+-  set(SPIRV_TOOLS_FULL_VISIBILITY ${SPIRV_TOOLS}-static)
+# If BUILD_SHARED_LIBS is undefined, set it based on whether we are
+# the master project or a subproject
+if (NOT DEFINED BUILD_SHARED_LIBS)
+  set(BUILD_SHARED_LIBS ${master_project})
+endif()
+
+if (BUILD_SHARED_LIBS)
+  set(static_default OFF)
+else()
+  set(static_default ON)
+endif()
+
+option(SPIRV_TOOLS_BUILD_SHARED "Build ${SPIRV_TOOLS} as a shared library"
+       ${BUILD_SHARED_LIBS})
+option(SPIRV_TOOLS_BUILD_STATIC "Build ${SPIRV_TOOLS} as a static library"
+       ${static_default})
+
+# Avoid conflict between the dll import library and
+# the static library (thanks microsoft)
+if(CMAKE_STATIC_LIBRARY_PREFIX STREQUAL "" AND
+   CMAKE_STATIC_LIBRARY_SUFFIX STREQUAL ".lib")
+    set(SPIRV_TOOLS_STATIC_LIBNAME "${SPIRV_TOOLS}-static")
+else()
+    set(SPIRV_TOOLS_STATIC_LIBNAME "${SPIRV_TOOLS}")
+endif()
+
+if (SPIRV_TOOLS_BUILD_STATIC)
+  # If building a static library at all, always build other libraries as static,
+  # and link to the static SPIRV-Tools library.
+   set(SPIRV_TOOLS_LIBRARY_TYPE "STATIC")
+-else(SPIRV_TOOLS_BUILD_STATIC)
+-  set(SPIRV_TOOLS_FULL_VISIBILITY ${SPIRV_TOOLS})
+-  if (NOT DEFINED SPIRV_TOOLS_LIBRARY_TYPE)
+-      if(BUILD_SHARED_LIBS)
+-        set(SPIRV_TOOLS_LIBRARY_TYPE "SHARED")
+-      else()
+-        set(SPIRV_TOOLS_LIBRARY_TYPE "STATIC")
+-      endif()
+-  endif()
+-endif(SPIRV_TOOLS_BUILD_STATIC)
+  set(SPIRV_TOOLS_FULL_VISIBILITY ${SPIRV_TOOLS}-static)
+elseif (SPIRV_TOOLS_BUILD_SHARED)
+  # If only building a shared library, link other libraries to the
+  # shared library. Also, other libraries should be shared
+  set(SPIRV_TOOLS_LIBRARY_TYPE "SHARED")
+  set(SPIRV_TOOLS_FULL_VISIBILITY ${SPIRV_TOOLS}-shared)
+else()
+  message(FATAL_ERROR "You must set one of "
+    "SPIRV_TOOLS_BUILD_STATIC or SPIRV_TOOLS_BUILD_SHARED!")
+endif()
+
+option(ENABLE_EXCEPTIONS_ON_MSVC
+    "Build SPIRV-TOOLS with C++ exceptions enabled in MSVC" ON)
+ 
+ function(spvtools_default_compile_options TARGET)
+   target_compile_options(${TARGET} PRIVATE ${SPIRV_WARNINGS})
+@@ -372,7 +384,7 @@ if (NOT "${SPIRV_SKIP_TESTS}")
+ endif()
+ 
+ set(SPIRV_LIBRARIES "-lSPIRV-Tools-opt -lSPIRV-Tools -lSPIRV-Tools-link")
+-set(SPIRV_SHARED_LIBRARIES "-lSPIRV-Tools-shared")
+set(SPIRV_SHARED_LIBRARIES "-lSPIRV-Tools")
+ 
+ # Build pkg-config file
+ # Use a first-class target so it's regenerated when relevant files are updated.
+@@ -388,7 +400,12 @@ add_custom_command(
+                       -DSPIRV_LIBRARIES=${SPIRV_LIBRARIES}
+                       -P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/write_pkg_config.cmake
+         DEPENDS "CHANGES" "${CMAKE_CURRENT_SOURCE_DIR}/cmake/SPIRV-Tools.pc.in" "${CMAKE_CURRENT_SOURCE_DIR}/cmake/write_pkg_config.cmake")
+-add_custom_command(
+
+set(pc_files ${CMAKE_CURRENT_BINARY_DIR}/SPIRV-Tools.pc)
+
+# TODO(crueter): remove?
+if (SPIRV_TOOLS_BUILD_SHARED)
+  add_custom_command(
+         OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/SPIRV-Tools-shared.pc
+         COMMAND ${CMAKE_COMMAND}
+                       -DCHANGES_FILE=${CMAKE_CURRENT_SOURCE_DIR}/CHANGES
+@@ -400,9 +417,12 @@ add_custom_command(
+                       -DSPIRV_SHARED_LIBRARIES=${SPIRV_SHARED_LIBRARIES}
+                       -P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/write_pkg_config.cmake
+         DEPENDS "CHANGES" "${CMAKE_CURRENT_SOURCE_DIR}/cmake/SPIRV-Tools-shared.pc.in" "${CMAKE_CURRENT_SOURCE_DIR}/cmake/write_pkg_config.cmake")
+-add_custom_target(spirv-tools-pkg-config 
+-        ALL 
+-        DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/SPIRV-Tools-shared.pc ${CMAKE_CURRENT_BINARY_DIR}/SPIRV-Tools.pc)
+  set(pc_files ${pc_files} ${CMAKE_CURRENT_BINARY_DIR}/SPIRV-Tools-shared.pc)
+endif()
+
+add_custom_target(spirv-tools-pkg-config
+        ALL
+        DEPENDS ${pc_files})
+ 
+ # Install pkg-config file
+ if (ENABLE_SPIRV_TOOLS_INSTALL)
+diff --git a/source/CMakeLists.txt b/source/CMakeLists.txt
+index bfa1e661bc..fd3712c70c 100644
+--- a/source/CMakeLists.txt
+++ b/source/CMakeLists.txt
+@@ -337,49 +337,44 @@ function(spirv_tools_default_target_options target)
+   )
+   set_property(TARGET ${target} PROPERTY FOLDER "SPIRV-Tools libraries")
+   spvtools_check_symbol_exports(${target})
+-  add_dependencies(${target} spirv-tools-build-version core_tables extinst_tables)
+  add_dependencies(${target}
+    spirv-tools-build-version core_tables extinst_tables)
+ endfunction()
+ 
+-# Always build ${SPIRV_TOOLS}-shared. This is expected distro packages, and
+-# unlike the other SPIRV_TOOLS target, defaults to hidden symbol visibility.
+-add_library(${SPIRV_TOOLS}-shared SHARED ${SPIRV_SOURCES})
+-if (SPIRV_TOOLS_USE_MIMALLOC)
+-  target_link_libraries(${SPIRV_TOOLS}-shared PRIVATE mimalloc-static)
+if (SPIRV_TOOLS_BUILD_SHARED)
+  add_library(${SPIRV_TOOLS}-shared SHARED ${SPIRV_SOURCES})
+  if (SPIRV_TOOLS_USE_MIMALLOC)
+    target_link_libraries(${SPIRV_TOOLS}-shared PRIVATE mimalloc-static)
+  endif()
+
+  set_target_properties(${SPIRV_TOOLS}-shared PROPERTIES
+    OUTPUT_NAME "${SPIRV_TOOLS}")
+  spirv_tools_default_target_options(${SPIRV_TOOLS}-shared)
+
+  target_compile_definitions(${SPIRV_TOOLS}-shared
+    PRIVATE SPIRV_TOOLS_IMPLEMENTATION
+    PUBLIC SPIRV_TOOLS_SHAREDLIB)
+
+  list(APPEND SPIRV_TOOLS_TARGETS ${SPIRV_TOOLS}-shared)
+ endif()
+-spirv_tools_default_target_options(${SPIRV_TOOLS}-shared)
+-set_target_properties(${SPIRV_TOOLS}-shared PROPERTIES CXX_VISIBILITY_PRESET hidden)
+-target_compile_definitions(${SPIRV_TOOLS}-shared
+-  PRIVATE SPIRV_TOOLS_IMPLEMENTATION
+-  PUBLIC SPIRV_TOOLS_SHAREDLIB
+-)
+ 
+ if(SPIRV_TOOLS_BUILD_STATIC)
+   add_library(${SPIRV_TOOLS}-static STATIC ${SPIRV_SOURCES})
+   if (SPIRV_TOOLS_USE_MIMALLOC AND SPIRV_TOOLS_USE_MIMALLOC_IN_STATIC_BUILD)
+     target_link_libraries(${SPIRV_TOOLS}-shared PRIVATE mimalloc-static)
+   endif()
+
+   spirv_tools_default_target_options(${SPIRV_TOOLS}-static)
+-  # The static target does not have the '-static' suffix.
+-  set_target_properties(${SPIRV_TOOLS}-static PROPERTIES OUTPUT_NAME "${SPIRV_TOOLS}")
+-
+-  # Create the "${SPIRV_TOOLS}" target as an alias to either "${SPIRV_TOOLS}-static"
+-  # or "${SPIRV_TOOLS}-shared" depending on the value of BUILD_SHARED_LIBS.
+-  if(BUILD_SHARED_LIBS)
+-    add_library(${SPIRV_TOOLS} ALIAS ${SPIRV_TOOLS}-shared)
+-  else()
+-    add_library(${SPIRV_TOOLS} ALIAS ${SPIRV_TOOLS}-static)
+-  endif()
+  set_target_properties(${SPIRV_TOOLS}-static PROPERTIES
+    OUTPUT_NAME "${SPIRV_TOOLS_STATIC_LIBNAME}")
+ 
+-  set(SPIRV_TOOLS_TARGETS ${SPIRV_TOOLS}-static ${SPIRV_TOOLS}-shared)
+-else()
+-  add_library(${SPIRV_TOOLS} ${SPIRV_TOOLS_LIBRARY_TYPE} ${SPIRV_SOURCES})
+-  if (SPIRV_TOOLS_USE_MIMALLOC)
+-    target_link_libraries(${SPIRV_TOOLS} PRIVATE mimalloc-static)
+-  endif()
+-  spirv_tools_default_target_options(${SPIRV_TOOLS})
+-  set(SPIRV_TOOLS_TARGETS ${SPIRV_TOOLS} ${SPIRV_TOOLS}-shared)
+  list(APPEND SPIRV_TOOLS_TARGETS ${SPIRV_TOOLS}-static)
+ endif()
+ 
+# Create the "SPIRV-Tools" target as an alias to either "SPIRV-Tools-static"
+# or "SPIRV-Tools-shared" depending on the value of SPIRV_TOOLS_BUILD_SHARED.
+add_library(${SPIRV_TOOLS} ALIAS ${SPIRV_TOOLS_FULL_VISIBILITY})
+
+ if("${CMAKE_SYSTEM_NAME}" STREQUAL "Linux")
+   find_library(LIBRT rt)
+   if(LIBRT)
+@@ -390,14 +385,17 @@ if("${CMAKE_SYSTEM_NAME}" STREQUAL "Linux")
+ endif()
+ 
+ if(ENABLE_SPIRV_TOOLS_INSTALL)
+-  if (SPIRV_TOOLS_USE_MIMALLOC AND (NOT SPIRV_TOOLS_BUILD_STATIC OR SPIRV_TOOLS_USE_MIMALLOC_IN_STATIC_BUILD))
+  if (SPIRV_TOOLS_USE_MIMALLOC AND
+    (NOT SPIRV_TOOLS_BUILD_STATIC OR SPIRV_TOOLS_USE_MIMALLOC_IN_STATIC_BUILD))
+     list(APPEND SPIRV_TOOLS_TARGETS mimalloc-static)
+   endif()
+   install(TARGETS ${SPIRV_TOOLS_TARGETS} EXPORT ${SPIRV_TOOLS}Targets)
+   export(EXPORT ${SPIRV_TOOLS}Targets FILE ${SPIRV_TOOLS}Target.cmake)
+ 
+   spvtools_config_package_dir(${SPIRV_TOOLS} PACKAGE_DIR)
+-  install(EXPORT ${SPIRV_TOOLS}Targets FILE ${SPIRV_TOOLS}Target.cmake DESTINATION ${PACKAGE_DIR})
+  install(EXPORT ${SPIRV_TOOLS}Targets
+    FILE ${SPIRV_TOOLS}Target.cmake
+    DESTINATION ${PACKAGE_DIR})
+ 
+   # Special config file for root library compared to other libs.
+   file(WRITE ${CMAKE_BINARY_DIR}/${SPIRV_TOOLS}Config.cmake
@@ -130,6 +130,7 @@ if (YUZU_STATIC_BUILD)

        # these libs do not properly provide static libs/let you do it with cmake
        set(fmt_FORCE_BUNDLED ON)
+        set(SPIRV-Tools_FORCE_BUNDLED ON)
        set(SPIRV-Headers_FORCE_BUNDLED ON)
        set(zstd_FORCE_BUNDLED ON)
    endif()
@@ -169,31 +170,6 @@ if (MSVC AND NOT CXX_CLANG)
    set(CMAKE_CXX_FLAGS_INIT "${CMAKE_CXX_FLAGS_INIT} /W3 /WX-")
 endif()

-# Set runtime library to MD/MDd for all configurations
-if(MSVC)
-    if (YUZU_USE_BUNDLED_QT AND ARCHITECTURE_arm64)
-        set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>")
-        set(libflag MT)
-    else()
-        set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>DLL")
-        set(libflag MD)
-    endif()
-
-    # Force all projects (including external dependencies) to use the same runtime
-    set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /${libflag}")
-    set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /${libflag}d")
-    set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /${libflag}")
-    set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /${libflag}d")
-
-    # Add this to ensure Cubeb uses the same runtime
-    add_compile_options(
-        $<$<COMPILE_LANGUAGE:C,CXX>:$<$<CONFIG:Debug>:/${libflag}d>>
-        $<$<COMPILE_LANGUAGE:C,CXX>:$<$<CONFIG:Release>:/${libflag}>>
-        $<$<COMPILE_LANGUAGE:C,CXX>:$<$<CONFIG:RelWithDebInfo>:/${libflag}>>
-        $<$<COMPILE_LANGUAGE:C,CXX>:$<$<CONFIG:MinSizeRel>:/${libflag}>>
-    )
-endif()
-
 # TODO(crueter): Cleanup, each dep that has a bundled option should allow to choose between bundled, external, system
 cmake_dependent_option(YUZU_USE_EXTERNAL_SDL2 "Build SDL2 from external source" OFF "NOT MSVC;NOT ANDROID" OFF)
 cmake_dependent_option(YUZU_USE_BUNDLED_SDL2 "Download bundled SDL2 build" "${MSVC}" "NOT ANDROID" OFF)
@@ -293,6 +269,11 @@ if (NOT EXISTS ${PROJECT_BINARY_DIR}/${compat_json})
    file(WRITE ${PROJECT_BINARY_DIR}/${compat_json} "")
 endif()

+if (YUZU_LEGACY)
+    message(WARNING "Making legacy build. Performance may suffer.")
+    add_compile_definitions(YUZU_LEGACY)
+endif()
+
 if (ARCHITECTURE_arm64 AND (ANDROID OR PLATFORM_LINUX))
    set(HAS_NCE 1)
    add_compile_definitions(HAS_NCE=1)
@@ -444,10 +425,10 @@ if (zstd_ADDED)
    add_library(zstd::libzstd ALIAS libzstd_static)
 endif()

-# nlohmann
-AddJsonPackage(nlohmann)
-
 if (NOT YUZU_STATIC_ROOM)
+    # nlohmann
+    AddJsonPackage(nlohmann)
+
    # zlib
    AddJsonPackage(zlib)

@@ -505,7 +486,7 @@ endfunction()
 # =============================================

 if (APPLE)
-    foreach(fw Carbon Metal Cocoa IOKit CoreVideo CoreMedia Security)
+    foreach(fw Carbon Metal Cocoa IOKit CoreVideo CoreMedia)
        find_library(${fw}_LIBRARY ${fw} REQUIRED)
        list(APPEND PLATFORM_LIBRARIES ${${fw}_LIBRARY})
    endforeach()
@@ -542,6 +523,7 @@ if (NOT YUZU_STATIC_ROOM)
    find_package(VulkanMemoryAllocator)
    find_package(VulkanUtilityLibraries)
    find_package(SimpleIni)
+    find_package(SPIRV-Tools)
    find_package(sirit)
    find_package(gamemode)
    find_package(frozen)
@@ -713,6 +695,25 @@ if (MSVC AND CXX_CLANG)
    link_libraries(llvm-mingw-runtime)
 endif()

+# Set runtime library to MD/MDd for all configurations
+if(MSVC)
+    set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>DLL")
+
+    # Force all projects (including external dependencies) to use the same runtime
+    set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /MD")
+    set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /MDd")
+    set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /MD")
+    set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MDd")
+
+    # Add this to ensure Cubeb uses the same runtime
+    add_compile_options(
+        $<$<CONFIG:Debug>:/MDd>
+        $<$<CONFIG:Release>:/MD>
+        $<$<CONFIG:RelWithDebInfo>:/MD>
+        $<$<CONFIG:MinSizeRel>:/MD>
+    )
+endif()
+
 add_subdirectory(src)

 # Set yuzu project or yuzu-cmd project as default StartUp Project in Visual Studio depending on whether QT is enabled or not
@@ -0,0 +1,26 @@
+# SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# SPDX-FileCopyrightText: 2022 yuzu Emulator Project
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+include(FindPackageHandleStandardArgs)
+
+find_package(PkgConfig QUIET)
+pkg_search_module(SPIRV-Tools QUIET IMPORTED_TARGET SPIRV-Tools)
+find_package_handle_standard_args(SPIRV-Tools
+    REQUIRED_VARS SPIRV-Tools_LINK_LIBRARIES
+    VERSION_VAR SPIRV-Tools_VERSION
+)
+
+if (PLATFORM_MSYS)
+    FixMsysPath(PkgConfig::SPIRV-Tools)
+endif()
+
+if (SPIRV-Tools_FOUND AND NOT TARGET SPIRV-Tools::SPIRV-Tools)
+    if (TARGET SPIRV-Tools)
+        add_library(SPIRV-Tools::SPIRV-Tools ALIAS SPIRV-Tools)
+    else()
+        add_library(SPIRV-Tools::SPIRV-Tools ALIAS PkgConfig::SPIRV-Tools)
+    endif()
+endif()
@@ -33,21 +33,19 @@ endif()
 set(GIT_DESC ${BUILD_VERSION})

 # Generate cpp with Git revision from template
+# Also if this is a CI build, add the build name (ie: Nightly, Canary) to the scm_rev file as well

-# TODO(crueter): Stable releases feed.
-set(BUILD_AUTO_UPDATE_STABLE_REPO "eden-emu/eden")
-set(BUILD_AUTO_UPDATE_STABLE_API "git.eden-emu.dev")
-set(BUILD_AUTO_UPDATE_STABLE_API_PATH "/api/v1/repos/")
-
-set(BUILD_AUTO_UPDATE_API_PATH "/latest/release.json")
+# Auto-updater metadata! Must somewhat mirror GitHub API endpoint
 if (NIGHTLY_BUILD)
    set(BUILD_AUTO_UPDATE_WEBSITE "https://git.eden-emu.dev")
-    set(BUILD_AUTO_UPDATE_API "nightly.eden-emu.dev")
+    set(BUILD_AUTO_UPDATE_API "git.eden-emu.dev")
+    set(BUILD_AUTO_UPDATE_API_PATH "/api/v1/repos/")
    set(BUILD_AUTO_UPDATE_REPO "eden-ci/nightly")
    set(REPO_NAME "Eden Nightly")
 else()
    set(BUILD_AUTO_UPDATE_WEBSITE "https://git.eden-emu.dev")
-    set(BUILD_AUTO_UPDATE_API "stable.eden-emu.dev")
+    set(BUILD_AUTO_UPDATE_API "git.eden-emu.dev")
+    set(BUILD_AUTO_UPDATE_API_PATH "/api/v1/repos/")
    set(BUILD_AUTO_UPDATE_REPO "eden-emu/eden")
    set(REPO_NAME "Eden")
 endif()
@@ -1,289 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="512"
-   height="512"
-   fill="none"
-   viewBox="0 0 512 512"
-   version="1.1"
-   id="svg7"
-   sodipodi:docname="1stanni.svg"
-   inkscape:version="1.4.3 (0d15f75042, 2025-12-25)"
-   inkscape:export-filename="base.svg.2026_01_12_14_43_47.0.svg"
-   inkscape:export-xdpi="96"
-   inkscape:export-ydpi="96"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg">
-  <defs
-     id="defs7">
-    <linearGradient
-       id="linearGradient34"
-       inkscape:collect="always">
-      <stop
-         style="stop-color:#ffd700;stop-opacity:1;"
-         offset="0"
-         id="stop34" />
-      <stop
-         style="stop-color:#ffd700;stop-opacity:0.48031053;"
-         offset="1"
-         id="stop35" />
-    </linearGradient>
-    <rect
-       x="20.999999"
-       y="287.30493"
-       width="487.07235"
-       height="134.69506"
-       id="rect22" />
-    <linearGradient
-       id="linearGradient21"
-       inkscape:collect="always">
-      <stop
-         style="stop-color:#3a0057;stop-opacity:1;"
-         offset="0"
-         id="stop21" />
-      <stop
-         style="stop-color:#830091;stop-opacity:1;"
-         offset="1"
-         id="stop22" />
-    </linearGradient>
-    <linearGradient
-       id="swatch37"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop37" />
-    </linearGradient>
-    <linearGradient
-       id="swatch28"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#252525;stop-opacity:1;"
-         offset="0"
-         id="stop28" />
-    </linearGradient>
-    <linearGradient
-       id="swatch27"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="0"
-         id="stop27" />
-    </linearGradient>
-    <linearGradient
-       id="swatch15"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop16" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient14"
-       inkscape:swatch="gradient">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop14" />
-      <stop
-         style="stop-color:#ffffff;stop-opacity:0;"
-         offset="1"
-         id="stop15" />
-    </linearGradient>
-    <linearGradient
-       id="swatch9"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop10" />
-    </linearGradient>
-    <linearGradient
-       id="swatch8"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop9" />
-    </linearGradient>
-    <rect
-       x="22.627417"
-       y="402.76802"
-       width="521.34025"
-       height="248.94868"
-       id="rect24" />
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath18">
-      <circle
-         style="opacity:1;mix-blend-mode:normal;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:10.8382;stroke-opacity:0.566238;paint-order:stroke fill markers"
-         id="circle18"
-         cx="-246.8315"
-         cy="246.8338"
-         inkscape:label="Circle"
-         r="191.89999" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath22">
-      <circle
-         style="opacity:1;mix-blend-mode:normal;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:10.8382;stroke-opacity:0.566238;paint-order:stroke fill markers"
-         id="circle22"
-         cx="256"
-         cy="256"
-         inkscape:label="Circle"
-         r="191.89999" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath128">
-      <circle
-         style="fill:none;fill-opacity:1;stroke:#03ffff;stroke-width:0;stroke-dasharray:none;stroke-opacity:1"
-         id="circle128"
-         cx="256"
-         cy="256"
-         r="192" />
-    </clipPath>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient21"
-       id="linearGradient22"
-       x1="256"
-       y1="0"
-       x2="256"
-       y2="512"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34"
-       id="linearGradient35"
-       x1="256"
-       y1="-0.048701428"
-       x2="256"
-       y2="512.04932"
-       gradientUnits="userSpaceOnUse" />
-    <filter
-       inkscape:label="Glowing Bubble"
-       inkscape:menu="Ridges"
-       inkscape:menu-tooltip="Bubble effect with refraction and glow"
-       x="-0.19420711"
-       y="-0.11239541"
-       width="1.3884142"
-       height="1.2247908"
-       style="color-interpolation-filters:sRGB;"
-       id="filter61">
-      <feGaussianBlur
-         stdDeviation="1"
-         result="result1"
-         id="feGaussianBlur56" />
-      <feGaussianBlur
-         stdDeviation="10"
-         result="result6"
-         in="result1"
-         id="feGaussianBlur57" />
-      <feComposite
-         operator="atop"
-         in="result6"
-         in2="result1"
-         result="result8"
-         id="feComposite57" />
-      <feComposite
-         operator="xor"
-         result="fbSourceGraphic"
-         in="result6"
-         in2="result8"
-         id="feComposite58" />
-      <feColorMatrix
-         result="fbSourceGraphicAlpha"
-         in="fbSourceGraphic"
-         values="0 0 0 -1 0 0 0 0 -1 0 0 0 0 -1 0 0 0 0 2 0 "
-         id="feColorMatrix58" />
-      <feGaussianBlur
-         result="result0"
-         in="fbSourceGraphicAlpha"
-         stdDeviation="1"
-         id="feGaussianBlur58" />
-      <feSpecularLighting
-         specularExponent="35"
-         specularConstant="1.5"
-         surfaceScale="-2"
-         lighting-color="rgb(255,255,255)"
-         result="result1"
-         in="result0"
-         id="feSpecularLighting58">
-        <feDistantLight
-           azimuth="230"
-           elevation="60"
-           id="feDistantLight58" />
-      </feSpecularLighting>
-      <feComposite
-         operator="in"
-         result="result2"
-         in="result1"
-         in2="fbSourceGraphicAlpha"
-         id="feComposite59" />
-      <feComposite
-         k3="1.2"
-         k2="1.1"
-         operator="arithmetic"
-         result="result4"
-         in="fbSourceGraphic"
-         in2="result2"
-         id="feComposite60" />
-      <feGaussianBlur
-         result="result80"
-         in="result4"
-         stdDeviation="0.5"
-         id="feGaussianBlur60" />
-      <feComposite
-         operator="atop"
-         in="result9"
-         in2="result80"
-         result="result91"
-         id="feComposite61" />
-      <feBlend
-         mode="multiply"
-         in2="result91"
-         id="feBlend61" />
-    </filter>
-  </defs>
-  <sodipodi:namedview
-     id="namedview7"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="1"
-     inkscape:cx="213.49999"
-     inkscape:cy="248.99999"
-     inkscape:window-width="1600"
-     inkscape:window-height="849"
-     inkscape:window-x="0"
-     inkscape:window-y="27"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg7" />
-  <circle
-     style="fill:url(#linearGradient22);fill-opacity:1;stroke:none;stroke-width:8"
-     id="path21"
-     cx="256"
-     cy="256"
-     r="256" />
-  <path
-     id="path8-7"
-     style="display:inline;mix-blend-mode:normal;fill:url(#linearGradient35);fill-opacity:1;fill-rule:nonzero;stroke:#320081;stroke-width:4.067;stroke-dasharray:none;stroke-opacity:1;paint-order:stroke fill markers"
-     inkscape:label="Circle"
-     d="M 256,2.2792898 A 254.0155,253.71401 0 0 0 150.68475,25.115202 c 19.54414,1.070775 38.74692,5.250294 51.56848,11.647658 14.14361,7.056691 28.63804,19.185961 39.4212,29.347551 h 40.60981 c 1.03847,-0.68139 2.10297,-1.36938 3.1938,-2.05957 5.45602,-15.78533 14.79164,-43.183497 19.49612,-57.0097682 A 254.0155,253.71401 0 0 0 256,2.2792898 Z m 61.57106,7.567234 -18.26098,46.1544672 c 7.79702,-4.13918 16.35655,-7.87447 25.20671,-10.87081 23.1229,-7.828433 43.96931,-10.170904 54.94058,-10.868226 A 254.0155,253.71401 0 0 0 317.57106,9.8465238 Z m 65.39277,26.4001532 c -9.68256,4.806644 -33.05532,16.642034 -55.68217,29.863734 H 424.4677 A 254.0155,253.71401 0 0 0 382.96383,36.246677 Z M 113.90698,45.690231 A 254.0155,253.71401 0 0 0 87.532302,66.110411 H 194.2739 c -1.47402,-0.80231 -2.35141,-1.25949 -2.35141,-1.25949 l 10.4496,-11.83348 -38.40568,7.01234 c 0,1e-5 -12.21537,-4.60266 -40.17313,-12.27223 -3.45336,-0.94731 -6.75329,-1.61824 -9.8863,-2.06732 z m -36.803618,30.18635 a 254.0155,253.71401 0 0 0 -34.88372,43.090929 h 59.976738 c 18.11461,-12.04145 40.14252,-22.882149 62.31266,-24.534159 52.93006,-3.9444 70.16538,1.86342 70.16538,1.86342 0,0 -4.612,-4.8206 -14.51938,-13.36656 -2.72366,-2.34942 -6.0844,-4.77373 -9.52455,-7.05363 z m 174.472868,0 c 4.57322,4.7186 7.29716,7.83565 7.29716,7.83565 0,0 3.53501,-3.18484 9.62532,-7.83565 z m 60.27649,0 c -21.56573,15.45339 -25.4703,27.979669 -25.4703,27.979669 0,0 54.83326,-19.215729 100.70543,-0.31228 11.63986,4.79661 21.58481,10.13159 29.94832,15.42354 h 52.74419 A 254.0155,253.71401 0 0 0 434.89664,75.876581 Z M 36.250648,128.73367 A 254.0155,253.71401 0 0 0 16.372095,171.82459 H 147.45478 c 1.45695,-2.5815 3.06539,-5.08648 4.83979,-7.48982 14.23694,-19.28301 27.92088,-30.0088 36.86047,-35.6011 h -30.25323 c -5.87346,0.93472 -12.04945,1.99094 -18.28166,3.16937 -30.12936,5.69727 -81.157618,22.78945 -81.157618,22.78945 0,0 11.47125,-12.39249 29.11369,-25.95882 z m 265.630492,0 c 33.48676,11.2434 52.42799,26.78443 62.7752,43.09092 h 130.97157 a 254.0155,253.71401 0 0 0 -19.87856,-43.09092 h -44.81136 c 14.85233,11.5863 21.59948,20.9854 21.59948,20.9854 0,0 -33.5226,-12.37087 -66.0646,-20.9854 z m -45.96641,16.27007 c -1.00419,0.0106 -10.12705,0.72026 -44.98966,20.64729 -3.12132,1.78406 -6.25434,3.86182 -9.37468,6.17356 h 41.81911 c 7.17181,-17.34774 12.64083,-26.82085 12.64083,-26.82085 0,0 -0.0287,-7.1e-4 -0.0957,0 z m 14.18088,0.0465 c 0,0 -3.31228,9.32762 -7.30492,26.77438 h 51.78554 C 287.6577,146.14158 270.09561,145.0502 270.09561,145.0502 Z M 13.152456,181.59075 A 254.0155,253.71401 0 0 0 3.927651,224.68167 H 134.1447 c 0.56161,-12.72411 2.67825,-28.50188 8.61499,-43.09092 z m 176.661504,0 c -14.27121,13.10564 -27.60733,29.58761 -37.56073,43.09092 h 73.3721 c 4.47018,-16.79061 9.35068,-31.26371 13.86562,-43.09092 z m 70.85787,0 c -2.41384,11.76417 -4.9032,26.20707 -6.94831,43.09092 H 360.4832 c -8.32133,-10.88917 -20.66988,-26.17008 -36.35141,-43.09092 z m 109.17313,0 c 6.63611,15.24089 6.92441,30.5373 5.57882,43.09092 h 132.64857 a 254.0155,253.71401 0 0 0 -9.22481,-43.09092 z M 2.90181,234.44783 A 254.0155,253.71401 0 0 0 1.984498,255.9933 254.0155,253.71401 0 0 0 2.90181,277.53876 h 211.89923 c 2.25762,-15.52555 5.14325,-29.93448 8.3385,-43.09093 h -77.8863 c -6.46396,9.27617 -10.33076,15.56549 -10.33076,15.56549 0,0 -0.82623,-6.14945 -0.9354,-15.56549 z m 249.72093,0 c -1.3692,13.09684 -2.4456,27.49209 -3.02068,43.09093 h 259.49613 a 254.0155,253.71401 0 0 0 0.91731,-21.54546 254.0155,253.71401 0 0 0 -0.91731,-21.54547 H 374.02584 c -0.445,2.5469 -0.90878,4.89768 -1.32817,7.01751 0,0 -1.69726,-2.53821 -4.94056,-7.01751 z M 3.927651,287.30493 a 254.0155,253.71401 0 0 0 9.224805,43.09091 H 214.04393 c -1.29238,-15.40742 -1.57503,-30.04388 -0.41861,-43.09091 z m 245.385009,0 c -0.30355,13.54349 -0.22032,27.92598 0.36951,43.09091 h 249.16537 a 254.0155,253.71401 0 0 0 9.22481,-43.09091 z M 16.369511,340.16201 a 254.0155,253.71401 0 0 0 19.878554,43.09091 H 221.4677 c -2.69781,-14.4523 -4.96108,-29.01285 -6.4832,-43.09091 z m 233.842379,0 c 1.15864,15.47765 3.81286,29.83979 7.51679,43.09091 h 218.02325 a 254.0155,253.71401 0 0 0 19.87856,-43.09091 z M 42.217052,393.01909 a 254.0155,253.71401 0 0 0 34.88372,43.09093 H 233.09561 c -3.40902,-13.67281 -6.76794,-28.2531 -9.73902,-43.09093 z m 218.490958,0 c 5.34985,16.15926 12.22007,30.51982 19.68733,43.09093 h 154.50389 a 254.0155,253.71401 0 0 0 34.88371,-43.09093 z M 87.529722,445.87618 a 254.0155,253.71401 0 0 0 166.229968,63.8208 c -3.67805,-12.0825 -10.85464,-35.49828 -18.18088,-63.8208 z m 199.010328,0 c 17.5887,26.43772 36.99259,43.60598 47.33592,51.61309 a 254.0155,253.71401 0 0 0 90.59431,-51.61309 z" />
-  <path
-     id="path27"
-     style="display:inline;mix-blend-mode:multiply;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:3;stroke-linejoin:round;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers"
-     d="m 318.98012,441.7375 c -9.87518,-6.73978 -64.39137,-49.0272 -67.68975,-127.81978 -3.69298,-88.21893 15.36468,-141.91029 15.36468,-141.91029 0,0 16.00378,0.99513 39.80316,26.53195 23.79939,25.53753 37.74965,46.43102 37.74965,46.43102 3.91262,-19.79992 12.84563,-66.32402 -60.72865,-87.55523 0,0 12.82326,-5.38883 39.3925,-3.81382 26.56907,1.57572 81.6822,21.93799 81.6822,21.93799 0,0 -14.79766,-20.63773 -49.47063,-34.94295 -34.67291,-14.30533 -76.1182,0.23644 -76.1182,0.23644 0,0 3.86959,-12.43127 27.22669,-26.38478 23.35718,-13.9537 49.27409,-26.501533 49.27409,-26.501533 0,0 -21.97854,-0.26548 -47.67725,8.44535 -6.68948,2.267506 -13.15863,5.094213 -19.05208,8.226563 l 16.05803,-40.634103 -4.4617,-1.89059 -5.1305,-0.95965 c 0,0 -11.24072,33.12428 -16.92051,49.576513 -12.13137,7.68489 -20.11005,14.87735 -20.11005,14.87735 0,0 -21.90573,-25.09227 -42.79668,-35.527803 -26.03412,-13.00525 -86.88249,-13.90359 -94.0044,10.401173 0,0 13.56804,-7.884703 34.70032,-2.080917 21.13214,5.803997 30.3644,9.287307 30.3644,9.287307 l 29.02989,-5.30681 -7.89811,8.95527 c 0,0 13.8496,7.21324 21.33822,13.68063 7.48859,6.46722 10.9757,10.11472 10.9757,10.11472 0,0 -13.02739,-4.39388 -53.03507,-1.40893 -40.00771,2.98473 -79.40016,45.60209 -79.40016,45.60209 0,0 38.57037,-12.93531 61.34393,-17.24677 22.77354,-4.31126 44.52166,-6.46757 44.52166,-6.46757 0,0 -17.23298,5.97003 -35.69792,31.00932 -18.46522,25.03987 -13.13146,64.83866 -13.13146,64.83866 0,0 29.33874,-47.7577 57.44675,-63.84249 28.10798,-16.08527 34.0799,-15.6238 34.0799,-15.6238 0,0 -22.56785,39.13486 -31.39017,101.98268 -8.03005,57.2039 26.77689,163.75449 31.1572,178.89699"
-     sodipodi:nodetypes="cscsccscscscsccccccscscccscscscscscsc"
-     inkscape:label="MainOutline"
-     clip-path="url(#clipPath128)"
-     transform="matrix(1.3229974,0,0,1.3214002,-82.687282,-82.278451)" />
-</svg>
@@ -1 +0,0 @@
-#ffd700
@@ -4,8 +4,7 @@
 - [Arch Linux](#arch-linux)
 - [Gentoo Linux](#gentoo-linux)
 - [macOS](#macos)
- [OpenIndiana](#openindiana)
- [OmniOS](#omnios)
+- [Solaris](#solaris)
 - [HaikuOS](#haikuos)
 - [OpenBSD](#openbsd)
 - [FreeBSD](#freebsd)
@@ -32,14 +31,14 @@ If you're having issues with building, always consult that ebuild.

 macOS is largely untested. Expect crashes, significant Vulkan issues, and other fun stuff.

-## OpenIndiana
+## Solaris

 Always consult [the OpenIndiana package list](https://pkg.openindiana.org/hipster/en/index.shtml) to cross-verify availability.

 Run the usual update + install of essential toolings: `sudo pkg update && sudo pkg install git cmake`.

- **gcc**: Install either `developer/gcc-14`.
- **clang**: Version 20 is broken, install `developer/clang-19`.
+- **gcc**: `sudo pkg install developer/gcc-14`.
+- **clang**: Version 20 is broken, use `sudo pkg install developer/clang-19`.

 Qt Widgets appears to be broken. For now, add `-DENABLE_QT=OFF` to your configure command. In the meantime, a Qt Quick frontend is in the works--check back later!

@@ -68,31 +67,6 @@ export LIBGL_ALWAYS_SOFTWARE=1
 - If using OpenIndiana, due to a bug in SDL2's CMake configuration, audio driver defaults to SunOS `<sys/audioio.h>`, which does not exist on OpenIndiana. Using external or bundled SDL2 may solve this.
 - System OpenSSL generally does not work. Instead, use `-DYUZU_USE_BUNDLED_OPENSSL=ON` to use a bundled static OpenSSL, or build a system dependency from source.

-## OmniOS
-
-Install `developer/gcc14` on OmniOS using pkgsrc.
-
-Since so many dependencies are missing on `OmniOS`, you may wish to use `-DCPMUTIL_FORCE_BUNDLED=ON -DYUZU_USE_EXTERNAL_SDL2=ON`
-
-For OmniOS you are required to build glslang yourself:
-```sh
-sudo pkg install python-313
-git clone --depth=1 https://github.com/KhronosGroup/glslang.git
-cd glslang
-python3.13 ./update_glslang_sources.py
-cmake -B build -DCMAKE_BUILD_TYPE=Release
-cmake --build build -- -j `nproc`
-cmake --install build
-```
-
-It may be tempting to specify `-t glslang`, but this will cause installation to fail. So don't.
-
-Using `--parallel` on CMake incorrectly passes `dmake ... -jn` instead of `dmake ... -j n`, this is a bug with OmniOS's CMake, and as such it's recommended to not use this option until it's fixed.
-
-You may also need to install `gmake` in order to properly build FFmpeg, this is provided by the `build-essential` package.
-
-If it wasn't obvious already, you require a X11 server to properly run the emulator within OmniOS, [this guide](https://web.archive.org/web/20260424200928/https://geekblood.wordpress.com/2017/10/26/installing-x11-and-a-desktop-environment-on-omnios/) is a great starting point for that, the links to pkgsrc are outdated so follow [this exemplar](https://pkgsrc.smartos.org/install-on-illumos/) as well:
-
 ## HaikuOS

 It's recommended to do a `pkgman full-sync` before installing. See [HaikuOS: Installing applications](https://www.haiku-os.org/guides/daily-tasks/install-applications/). Sometimes the process may be interrupted by an error like "Interrupted syscall". Simply firing the command again fixes the issue. By default `g++` is included on the default installation.
@@ -9,7 +9,6 @@ When reporting issues or finding bugs, we often need backtraces, debug logs, or
 If your bug is related to a graphical issue--e.g. mismatched colors, vertex explosions, flickering, etc.--then you are required to include graphical debugging logs in your issue reports.

 Graphics Debugging is found in General -> Debug on desktop, and Advanced Settings -> Debug on Android. Android users are all set; however, desktop users may need to install the Vulkan Validation Layers:
-
 - Windows: Install the [Vulkan SDK](https://vulkan.lunarg.com/sdk/home)
 - Linux, BSD, etc: Install `vulkan-validation-layers`, `vulkan-layers`, or similar from your package manager. It should be located in e.g. `/usr/lib64/libVkLayer_khronos_validation.so`

@@ -31,16 +30,15 @@ Ignoring SIGSEGV when debugging in host:
 ### gdb

 You must have GDB installed for aarch64 to debug the target. Install it through your package manager, e.g.:
+* On Arch:
+  * `sudo pacman -Syu aarch64-linux-gnu-gdb`
+* On Gentoo:
+  * `sudo emerge --ask crossdev`
+  * `sudo crossdev -t aarch64-unknown-linux-gnu --ex-gdb`

- On Arch:
-  - `sudo pacman -Syu aarch64-linux-gnu-gdb`
- On Gentoo:
-  - `sudo emerge --ask crossdev`
-  - `sudo crossdev -t aarch64-unknown-linux-gnu --ex-gdb`
-
-Run `./build/bin/eden-cli -c <path to your config file (see logs where you run eden normally to see where it is)> -d -g <path to game>`, or `Enable GDB Stub` at General > Debug, then hook up an aarch64-gdb:
-
- `target remote localhost:6543`
+Run `./build/bin/eden-cli -c <path to your config file (see logs where you run eden normally to see where it is)> -d -g <path to game>`
+Or `Enable GDB Stub` at General > Debug, then hook up an aarch64-gdb:
+* `target remote localhost:6543`

 Type `c` (for continue) and then if it crashes just do a `bt` (backtrace) and `layout asm`

@@ -71,27 +69,26 @@ For more information type `info gdb` and read [the man page](https://man7.org/li

 ## Simple checklist for debugging black screens using Renderdoc

-Renderdoc is a free, cross platform, multi-graphics API debugger. It is an invaluable tool for diagnosing issues with graphics applications, and includes support for Vulkan. Get it at [renderdoc.org](https://renderdoc.org).
+Renderdoc is a free, cross platform, multi-graphics API debugger. It is an invaluable tool for diagnosing issues with graphics applications, and includes support for Vulkan. Get it [here](https://renderdoc.org).

 Before using renderdoc to diagnose issues, it is always good to make sure there are no validation errors. Any errors means the behavior of the application is undefined. That said, renderdoc can help debug validation errors if you do have them.

 When debugging a black screen, there are many ways the application could have setup Vulkan wrong.
 Here is a short checklist of items to look at to make sure are appropriate:
-
- Draw call counts are correct (aka not zero, or if rendering many triangles, not 3)
- Vertex buffers are bound
- vertex attributes are correct - Make sure the size & offset of each attribute matches what should it should be
- Any bound push constants and descriptors have the right data - including:
-  - Matrices have correct values - double check the model, view, & projection matrices are uploaded correctly
- Pipeline state is correct
-  - viewport range is correct - x,y are 0,0; width & height are screen dimensions, minDepth is 0, maxDepth is 1, NDCDepthRange is 0,1
-  - Fill mode matches expected - usually solid
-  - Culling mode makes sense - commonly back or none
-  - The winding direction is correct - typically CCW (counter clockwise)
-  - Scissor region is correct - usually same as viewport's x,y,width, &height
- Blend state is correct
- Depth state is correct - typically enabled with Function set to Less than or Equal
- Swapchain images are bound when rendering to the swapchain
- Image being rendered to is the same as the one being presented when rendering to the swapchain
+* Draw call counts are correct (aka not zero, or if rendering many triangles, not 3)
+* Vertex buffers are bound
+* vertex attributes are correct - Make sure the size & offset of each attribute matches what should it should be
+* Any bound push constants and descriptors have the right data - including:
+  * Matrices have correct values - double check the model, view, & projection matrices are uploaded correctly
+* Pipeline state is correct
+  * viewport range is correct - x,y are 0,0; width & height are screen dimensions, minDepth is 0, maxDepth is 1, NDCDepthRange is 0,1
+  * Fill mode matches expected - usually solid
+  * Culling mode makes sense - commonly back or none
+  * The winding direction is correct - typically CCW (counter clockwise)
+  * Scissor region is correct - usually same as viewport's x,y,width, &height
+* Blend state is correct
+* Depth state is correct - typically enabled with Function set to Less than or Equal
+* Swapchain images are bound when rendering to the swapchain
+* Image being rendered to is the same as the one being presented when rendering to the swapchain

 Alternatively, a [RenderDoc Extension](https://github.com/baldurk/renderdoc-contrib/tree/main/baldurk/whereismydraw) ([Archive](https://web.archive.org/web/20250000000000*/https://github.com/baldurk/renderdoc-contrib/tree/main/baldurk/whereismydraw)) exists which automates doing a lot of these manual steps.
@@ -291,23 +291,13 @@ pkg install gcc14 git cmake unzip nasm autoconf bash pkgconf ffmpeg glslang gmak

 </details>
 <details>
-<summary>OpenIndiana</summary>
+<summary>Solaris / OpenIndiana</summary>

 ```sh
-sudo pkg install git cmake qt6 boost glslang libzip library/lz4 libusb-1 nlohmann-json openssl opus sdl2 zlib compress/zstd unzip pkg-config nasm autoconf mesa library/libdrm header-drm developer/fmt
+sudo pkg install qt6 boost glslang libzip library/lz4 libusb-1 nlohmann-json openssl opus sdl2 zlib compress/zstd unzip pkg-config nasm autoconf mesa library/libdrm header-drm developer/fmt
 ```

-[Caveats](./Caveats.md#openindiana).
-
-</details>
-<details>
-<summary>OmniOS</summary>
-
-```sh
-sudo pkgin install git cmake autoconf build-essential libusb-1 nasm gcc13
-```
-
-[Caveats](./Caveats.md#omnios).
+[Caveats](./Caveats.md#solaris).

 </details>
 <details>
@@ -344,7 +334,7 @@ pacman -Syuu --needed --noconfirm $packages
 <summary>HaikuOS</summary>

 ```sh
-pkgman install git cmake patch libfmt_devel nlohmann_json lz4_devel opus_devel boost1.90_devel vulkan_devel qt6_base_devel qt6_declarative_devel libsdl2_devel ffmpeg7_devel libx11_devel enet_devel catch2_devel quazip1_qt5_devel qt6_5compat_devel glslang qt6_devel qt6_charts_devel
+pkgman install git cmake patch libfmt_devel nlohmann_json lz4_devel opus_devel boost1.89_devel vulkan_devel qt6_base_devel qt6_declarative_devel libsdl2_devel ffmpeg7_devel libx11_devel enet_devel catch2_devel quazip1_qt5_devel qt6_5compat_devel glslang qt6_devel qt6_charts_devel
 ```

 [Caveats](./Caveats.md#haikuos).
@@ -1,11 +1,9 @@
 # Development guidelines

 ## License Headers
-
 All commits must have proper license header accreditation.

 You can easily add all necessary license headers by running:
-
 ```sh
 git fetch origin master:master
 .ci/license-header.sh -u -c
@@ -13,7 +11,6 @@ git push
 ```

 Alternatively, you may omit `-c` and do an amend commit:
-
 ```sh
 git fetch origin master:master
 .ci/license-header.sh
@@ -25,10 +22,8 @@ If the work is licensed/vendored from other people or projects, you may omit the
 For more information on the license header script, run `.ci/license-header.sh -h`.

 ## Pull Requests
-
 Pull requests are only to be merged by core developers when properly tested and discussions conclude on Discord or other communication channels. Labels are recommended but not required. However, all PRs MUST be namespaced and optionally typed:
-
-```txt
+```
 [cmake] refactor: CPM over submodules
 [desktop] feat: implement firmware install from ZIP
 [hle] stub fw20 functions
@@ -39,7 +34,7 @@ Pull requests are only to be merged by core developers when properly tested and
 - The level of namespacing is generally left to the committer's choice.
 - However, we never recommend going more than two levels *except* in `hle`, in which case you may go as many as four levels depending on the specificity of your changes.
 - Ocassionally, up to two additional namespaces may be provided for more clarity.
-  - Changes that affect the entire project (sans CMake changes) should be namespaced as `meta`.
+  * Changes that affect the entire project (sans CMake changes) should be namespaced as `meta`.
 - Maintainers are permitted to change namespaces at will.
 - Commits within PRs are not required to be namespaced, but it is highly recommended.

@@ -55,7 +50,6 @@ When adding new settings, use `tr("Setting:")` if the setting is meant to be a f
 - Try to not write "slow/fast" options unless it clearly degrades/increases performance for a given case, as most options may modify behaviour that result in different metrics accross different systems. If for example the option is an "accuracy" option, writing "High" is sufficient to imply "Slow". No need to write "High (Slow)".

 Some examples:
-
 - "[...] negatively affecting image quality", "[...] degrading image quality": Same wording but with less filler.
 - "[...] this may cause some glitches or crashes in some games", "[...] this may cause soft-crashes": Crashes implies there may be glitches (as crashes are technically a form of a fatal glitch). The entire sentence is structured as "may cause [...] on some games", which is redundant, because "may cause [...] in games" has the same semantic meaning ("may" is a chance that it will occur on "some" given set).
 - "FIFO Relaxed is similar to FIFO [...]", "FIFO Relaxed [...]": The name already implies similarity.
@@ -63,16 +57,13 @@ Some examples:
 - "[...] it can [...] in some cases", "[...] it can [...]": Implied probability.

 Before adding a new setting, consider:
-
 - Does the piece of code that the setting pertains to, make a significant difference if it's on/off?
 - Can it be auto-detected?

 # IDE setup

 ## VSCode
-
 Copy this to `.vscode/settings.json`, get CMake tools and it should be ready to build:
-
 ```json
 {
    "editor.tabSize": 4,
@@ -92,7 +83,6 @@ You may additionally need the `Qt Extension Pack` extension if building Qt.
 # Build speedup

 If you have an HDD, use ramdisk (build in RAM), approximatedly you need 4GB for a full build with debug symbols:
-
 ```sh
 mkdir /tmp/ramdisk
 chmod 777 /tmp/ramdisk
@@ -106,11 +96,128 @@ umount /tmp/ramdisk
 # Assets and large files

 A general rule of thumb, before uploading files:
-
 - PNG files: Use [optipng](https://web.archive.org/web/20240325055059/https://optipng.sourceforge.net/).
 - SVG files: Use [svgo](https://github.com/svg/svgo).

 May not be used but worth mentioning nonethless:
-
 - OGG files: Use [OptiVorbis](https://github.com/OptiVorbis/OptiVorbis).
 - Video files: Use ffmpeg, preferably re-encode as AV1.
+
+# Bisecting older commits
+
+Since going into the past can be tricky (especially due to the dependencies from the project being lost thru time). This should "restore" the URLs for the respective submodules.
+
+```sh
+#!/bin/sh -e
+cat > .gitmodules <<EOF
+[submodule "enet"]
+	path = externals/enet
+	url = https://github.com/lsalzman/enet.git
+[submodule "cubeb"]
+	path = externals/cubeb
+	url = https://github.com/mozilla/cubeb.git
+[submodule "dynarmic"]
+	path = externals/dynarmic
+	url = https://github.com/lioncash/dynarmic.git
+[submodule "libusb"]
+	path = externals/libusb/libusb
+	url = https://github.com/libusb/libusb.git
+[submodule "discord-rpc"]
+	path = externals/discord-rpc
+	url = https://github.com/yuzu-emu-mirror/discord-rpc.git
+[submodule "Vulkan-Headers"]
+	path = externals/Vulkan-Headers
+	url = https://github.com/KhronosGroup/Vulkan-Headers.git
+[submodule "sirit"]
+	path = externals/sirit
+	url = https://github.com/yuzu-emu-mirror/sirit.git
+[submodule "mbedtls"]
+	path = externals/mbedtls
+	url = https://github.com/yuzu-emu-mirror/mbedtls.git
+[submodule "xbyak"]
+	path = externals/xbyak
+	url = https://github.com/herumi/xbyak.git
+[submodule "opus"]
+	path = externals/opus
+	url = https://github.com/xiph/opus.git
+[submodule "SDL"]
+	path = externals/SDL
+	url = https://github.com/libsdl-org/SDL.git
+[submodule "cpp-httplib"]
+	path = externals/cpp-httplib
+	url = https://github.com/yhirose/cpp-httplib.git
+[submodule "ffmpeg"]
+	path = externals/ffmpeg/ffmpeg
+	url = https://github.com/FFmpeg/FFmpeg.git
+[submodule "vcpkg"]
+	path = externals/vcpkg
+	url = https://github.com/microsoft/vcpkg.git
+[submodule "cpp-jwt"]
+	path = externals/cpp-jwt
+	url = https://github.com/arun11299/cpp-jwt.git
+[submodule "libadrenotools"]
+	path = externals/libadrenotools
+	url = https://github.com/bylaws/libadrenotools.git
+[submodule "tzdb_to_nx"]
+	path = externals/nx_tzdb/tzdb_to_nx
+	url = https://github.com/lat9nq/tzdb_to_nx.git
+[submodule "VulkanMemoryAllocator"]
+	path = externals/VulkanMemoryAllocator
+	url = https://github.com/GPUOpen-LibrariesAndSDKs/VulkanMemoryAllocator.git
+[submodule "breakpad"]
+	path = externals/breakpad
+	url = https://github.com/yuzu-emu-mirror/breakpad.git
+[submodule "simpleini"]
+	path = externals/simpleini
+	url = https://github.com/brofield/simpleini.git
+[submodule "oaknut"]
+	path = externals/oaknut
+	url = https://github.com/merryhime/oaknut.git
+[submodule "Vulkan-Utility-Libraries"]
+	path = externals/Vulkan-Utility-Libraries
+	url = https://github.com/KhronosGroup/Vulkan-Utility-Libraries.git
+[submodule "oboe"]
+	path = externals/oboe
+	url = https://github.com/google/oboe.git
+[submodule "externals/boost-headers"]
+	path = externals/boost-headers
+	url = https://github.com/boostorg/headers.git
+EOF
+git submodule sync
+update_or_checkout () {
+    if [ $0 = 'externals/sirit' ] \
+    || [ $0 = 'externals/dynarmic' ] \
+    || [ $0 = 'externals/breakpad' ] \
+    || [ $0 = 'externals/discord-rpc' ] \
+    || [ $0 = 'externals/mbedtls' ]; then
+        [ -f $0/CMakeLists.txt ] || git submodule update --force --remote --init -- $0
+        echo $0 ':remote' && git submodule update --remote $0
+        exit
+    elif [ $0 = 'externals/nx_tzdb/tzdb_to_nx' ]; then
+        [ -f $0/CMakeLists.txt ] || git submodule update --force --remote --init -- $0
+        echo $0 ':remote' && git submodule update --remote $0
+    else
+        echo $0 ':update' && git submodule update --init $0 && exit
+        echo $0 ':remote' && git submodule update --remote $0 && exit
+        echo $0 ':failure'
+    fi
+}
+export -f update_or_checkout
+grep path .gitmodules | sed 's/.*= //' | xargs -n 1 -I {} bash -c 'update_or_checkout "$@"' {}
+# Fix for LLVM builds
+sed -i 's/src\/yuzu\/main.cpp/${CMAKE_SOURCE_DIR}\/src\/yuzu\/main.cpp/g' CMakeModules/FindLLVM.cmake
+# Only after cloning and everything - fixes issues with Zydis
+cat > externals/dynarmic/src/dynarmic/common/x64_disassemble.cpp <<EOF
+#include <cstddef>
+#include <vector>
+#include <string>
+namespace Dynarmic::Common {
+void DumpDisassembledX64(const void* ptr, size_t size) {}
+std::vector<std::string> DisassembleX64(const void* ptr, size_t size) { return {}; }
+}
+EOF
+```
+
+If having issues with older artifacts, then run `rm -r externals/dynarmic/build externals/dynarmic/externals externals/nx_tzdb/tzdb_to_nx/externals externals/sirit/externals`.
+
+Configuring CMake with `-DSIRIT_USE_SYSTEM_SPIRV_HEADERS=1 -DCMAKE_CXX_FLAGS="-Wno-error" -DCMAKE_C_FLAGS="-Wno-error -Wno-array-parameter -Wno-stringop-overflow"` is also recommended.
@@ -16,7 +16,6 @@ This contains documentation created by developers. This contains build instructi
 - **[Dynarmic](./dynarmic)**
 - **[Cross compilation](./CrossCompile.md)**
 - **[Driver Bugs](./DriverBugs.md)**
- **[Building Older Commits](./build/OlderCommits.md)**

 ## Policies

@@ -1,40 +0,0 @@
-# Building Older Commits
-
-Bisecting and debugging older versions of Eden can be difficult, as many of our submodules have been deleted or removed. However, work has been done to make this process as simple as possible for users.
-
-## Script
-
-Copy the following script and store it in `fix.sh`:
-
-```sh
-#!/bin/sh -e
-
-git -C externals/discord-rpc checkout 0d8b2d6a37c6e47d62b37caa14708bf747c883bb
-git add externals/discord-rpc
-
-git -C externals/dynarmic checkout 05b7ba50588d1004e23ef91f1bda8be234be68f4
-git add externals/dynarmic
-
-git -C externals/mbedtls checkout ce4f81f4a926a0e0dcadd0128e016baba416e8ea
-git add externals/mbedtls
-
-git -C externals/oboe checkout e4f06f2143eb0173bf4a2bd15aae5e8cc3179405
-git add externals/oboe
-
-git -C externals/sirit checkout b870b062998244231a4f08004d3b25151732c5c5
-git add externals/sirit
-```
-
-Then, run `chmod +x fix.sh`
-
-## Submodules
-
-To check out submodules successfully, use this order of operations:
-
-```sh
-git submodule update --init --recursive --depth 1 --jobs 8 --progress
-./fix.sh
-git submodule update --init --recursive --depth 1 --jobs 8 --progress
-```
-
-And you should be good to go! If you check out a different commit that changes submodule commits, run the above command list again.
@@ -56,7 +56,7 @@ Use this when you need to connect to a multiplayer room for LDN functionality in
 - Multiplayer Options Configured in Eden Settings
 - Network Access

-### Steps
+## Steps
 There are 2 primary methods that you can use to connect to an existing room, depending on how the room is hosted.

 - Joining a Public Lobby
@@ -70,7 +70,7 @@ There are 2 primary methods that you can use to connect to an existing room, dep

 </aside>

-## Joining a Public Lobby
+### Joining a Public Lobby
 1. Open Eden and navigate to *Multiplayer → Browse Public Game Lobby*.
 2. The **Public Room Browser** will now open and display a list of publicly accessible rooms.  Find one you want to connect to and double click it.
    
@@ -90,7 +90,7 @@ If the hoster has not made the lobby public, or you don't want to find it in the

 ---

-## Hosting a Multiplayer Room
+# Hosting a Multiplayer Room
 Use this guide for when you want to host a multiplayer lobby to play with others in Eden.  In order to have someone access the room from outside your local network, see the *Access Your Multiplayer Room Externally* section for next steps.

 **Click [Here](https://evilperson1337.notion.site/Hosting-a-Multiplayer-Room-2c357c2edaf6819481dbe8a99926cea2) for a version of this guide with images & visual elements.**
@@ -100,7 +100,7 @@ Use this guide for when you want to host a multiplayer lobby to play with others
 - Network Access
 - Ability to allow programs through the firewall on your device.

-### Steps
+## Steps
 1. Open Eden and navigate to *Emulation → Multiplayer → Create Room.*    
 2. Fill out the following information in the popup dialog box.
    
@@ -120,7 +120,7 @@ Use this guide for when you want to host a multiplayer lobby to play with others

 ---

-## Access Your Multiplayer Room Externally
+# Access Your Multiplayer Room Externally
 Quite often the person with whom you want to play is located off of your internal network (LAN).  If you want to host a room and play with them you will need to get your devices to communicate with each other.  This guide will go over your options on how to do this so that you can play together.

 **Click [Here](https://evilperson1337.notion.site/Access-Your-Multiplayer-Room-Externally-2c357c2edaf681c0ab2ce2ee624d809d) for a version of this guide with images & visual elements.**
@@ -129,9 +129,9 @@ Quite often the person with whom you want to play is located off of your interna
 - Eden set up and Functioning
 - Network Access

-### Options
+## Options

-#### Port Forwarding
+### Port Forwarding

 - **Difficulty Level**: High
    
@@ -148,9 +148,8 @@ The process works by creating a static mapping—often called a “port-forward

 For our purposes we would pick the port we want to expose (*e.g. 24872*) and we would access our router's configuration and create a port-forward rule to send the traffic from an external connection to your local machine over our specified port (*24872)*.  The exact way to do so, varies greatly by router manufacturer - and sometimes require contacting your ISP to do so depending on your agreement.  You can look up your router on [*portforward.com*](https://portforward.com/router.htm) which may have instructions on how to do so for your specific equipment.  If it is not there, you will have to use Google/ChatGPT to determine the steps for your equipment.

-Remember you can't have one port open for multiple devices at the same time - you must only host from one device (or do more convoluted networking which we will not cover here).

-#### Use a Tunnelling Service
+### Use a Tunnelling Service
 - **Difficulty Level**: Easy
    
    <aside>
@@ -168,7 +167,7 @@ For our purposes we would spawn the listener for the port that way chose when ho
 - [*Playit.GG*](https://playit.gg/)


-#### Use a VPN Service
+### Use a VPN Service

 - **Difficulty**: Easy

@@ -190,7 +189,7 @@ The VPN solution is a good compromise between the tunnelling solution and port f

 ---

-## Finding the Server Information for a Multiplayer Room
+# Finding the Server Information for a Multiplayer Room
 Use this guide when you need to determine the connection information for the Public Multiplayer Lobby you are connected to.

 **Click [Here](https://evilperson1337.notion.site/Finding-the-Server-Information-for-a-Multiplayer-Room-2c557c2edaf6809e94e8ed3429b9eb26) for a version of this guide with images & visual elements.**
@@ -199,7 +198,7 @@ Use this guide when you need to determine the connection information for the Pub
 - Eden set up and configured
 - Internet Access

-### Steps
+## Steps

 ### Method 1: Grabbing the Address from the Log File
 1. Open Eden and Connect to the room you want to identify.
@@ -223,7 +222,7 @@ Use this guide when you need to determine the connection information for the Pub
 2. Open the terminal supported by your operating system.
 3. Run one of the following commands, replacing *<Name>* with the name of the server from step 1.
    
-    #### PowerShell Command [Windows Users]
+    ### PowerShell Command [Windows Users]
    
    ```powershell
    # Calls the API to get the address and port information
@@ -236,7 +235,7 @@ Use this guide when you need to determine the connection information for the Pub
    #}
    ```
    
-    #### CURL Command [MacOS/Linux Users] **Requires jq*
+    ### CURL Command [MacOS/Linux Users] **Requires jq*
    
    ```bash
    # Calls the API to get the address and port information
@@ -253,7 +252,7 @@ Use this guide when you need to determine the connection information for the Pub

 ---

-## Multiplayer for Local Co-Op Games
+# Multiplayer for Local Co-Op Games
 Use this guide when you want to play with a friend on a different system for games that only support local co-op.

 **Click [Here](https://evilperson1337.notion.site/Multiplayer-for-Local-Co-Op-Games-2c657c2edaf680c59975ec6b52022a2d) for a version of this guide with images & visual elements.**
@@ -272,7 +271,7 @@ In either situation at its core, we are emulating an input device on the host ma
    - Parsec is free to use for personal, non-commercial use.  For instructions on how to set up an account and install the client you should refer to the Parsec documentation on it's site.
 - Parsec client installed on your machine and remote (friend's) machine

-### Steps
+## Steps

 <aside>

@@ -295,22 +294,3 @@ This guide will assume you are the one hosting the game and go over things *Pars
 10. Set up the remote player's controller.
 11. Hit **OK** to apply the changes.
 12. Launch the game you want to play and enter the co-op mode.  How this works depends on the game, so you will have to look in the menus or online to find out.
-
-## Metaserver troubleshooting
-
-If you can't connect to the metaserver, it's likely your ISP is blocking the requests.
-
-### Linux and Steamdeck
-
-Most Linux systems and Steamdeck should allow to modify the base `/etc/hosts` file, this should fix the DNS lookup issue; hence add the following to said file:
-```
-28.165.181.135 api.ynet-fun.xyz api.ynet-fun.xyz
-```
-
-### Zapret
-
-In `lists/list-general.txt` add the following:
-```
-api.ynet-fun.xyz
-ynet-fun.xyz
-```
@@ -62,12 +62,6 @@ endif()
 # unordered_dense
 AddJsonPackage(unordered-dense)

-# httplib
-if (IOS)
-    set(HTTPLIB_USE_BROTLI_IF_AVAILABLE OFF)
-endif()
-AddJsonPackage(httplib)
-
 if (YUZU_STATIC_ROOM)
    return()
 endif()
@@ -192,6 +186,14 @@ else()
    endif()
 endif()

+# SPIRV Tools
+AddJsonPackage(spirv-tools)
+
+if (SPIRV-Tools_ADDED)
+    add_library(SPIRV-Tools::SPIRV-Tools ALIAS SPIRV-Tools-static)
+    target_link_libraries(SPIRV-Tools-static PRIVATE SPIRV-Tools-opt SPIRV-Tools-link)
+endif()
+
 # Catch2
 if (YUZU_TESTS OR DYNARMIC_TESTS)
    AddJsonPackage(catch2)
@@ -225,6 +227,9 @@ if (VulkanMemoryAllocator_ADDED)
    endif()
 endif()

+# httplib
+AddJsonPackage(httplib)
+
 # cpp-jwt
 if (ENABLE_WEB_SERVICE OR ENABLE_UPDATE_CHECKER)
    AddJsonPackage(cpp-jwt)
@@ -17,10 +17,6 @@

 if (${CMAKE_SYSTEM_NAME} STREQUAL "SunOS")
    set(PLATFORM_SUN ON)
-elseif (${CMAKE_SYSTEM_NAME} STREQUAL "OpenOrbis")
-    set(PLATFORM_PS4 ON)
-elseif (${CMAKE_SYSTEM_NAME} STREQUAL "managarm")
-    set(PLATFORM_MANAGARM ON)
 elseif (${CMAKE_SYSTEM_NAME} STREQUAL "FreeBSD")
    set(PLATFORM_FREEBSD ON)
 elseif (${CMAKE_SYSTEM_NAME} STREQUAL "OpenBSD")
@@ -37,8 +37,7 @@
            "0002-fix-zstd.patch"
        ],
        "options": [
-            "HTTPLIB_REQUIRE_OPENSSL ON",
-            "HTTPLIB_DISABLE_MACOSX_AUTOMATIC_ROOT_CERTIFICATES ON"
+            "HTTPLIB_REQUIRE_OPENSSL ON"
        ]
    },
    "cpp-jwt": {
@@ -102,6 +101,20 @@
        "git_version": "1.3.18",
        "find_args": "MODULE"
    },
+    "spirv-tools": {
+        "package": "SPIRV-Tools",
+        "repo": "KhronosGroup/SPIRV-Tools",
+        "sha": "0a7e28689a",
+        "hash": "eadfcceb82f4b414528d99962335e4f806101168474028f3cf7691ac40c37f323decf2a42c525e2d5bfa6f14ff132d6c5cf9b87c151490efad01f5e13ade1520",
+        "git_version": "2025.4",
+        "options": [
+            "SPIRV_SKIP_EXECUTABLES ON"
+        ],
+        "patches": [
+            "0001-netbsd-fix.patch",
+            "0002-allow-static-only.patch"
+        ]
+    },
    "spirv-headers": {
        "package": "SPIRV-Headers",
        "repo": "KhronosGroup/SPIRV-Headers",
@@ -1259,7 +1259,7 @@ class ParameterPack final : public Node {
  // Setup OutputBuffer for a pack expansion, unless we're already expanding
  // one.
  void initializePackExpansion(OutputBuffer &OB) const {
-    if (OB.CurrentPackMax == (std::numeric_limits<unsigned>::max)()) {
+    if (OB.CurrentPackMax == std::numeric_limits<unsigned>::max()) {
      OB.CurrentPackMax = static_cast<unsigned>(Data.size());
      OB.CurrentPackIndex = 0;
    }
@@ -1353,7 +1353,7 @@ public:
  const Node *getChild() const { return Child; }

  void printLeft(OutputBuffer &OB) const override {
-    constexpr unsigned Max = (std::numeric_limits<unsigned>::max)();
+    constexpr unsigned Max = std::numeric_limits<unsigned>::max();
    ScopedOverride<unsigned> SavePackIdx(OB.CurrentPackIndex, Max);
    ScopedOverride<unsigned> SavePackMax(OB.CurrentPackMax, Max);
    size_t StreamPos = OB.getCurrentPosition();
@@ -88,8 +88,8 @@ public:

  /// If a ParameterPackExpansion (or similar type) is encountered, the offset
  /// into the pack that we're currently printing.
-  unsigned CurrentPackIndex = (std::numeric_limits<unsigned>::max)();
-  unsigned CurrentPackMax = (std::numeric_limits<unsigned>::max)();
+  unsigned CurrentPackIndex = std::numeric_limits<unsigned>::max();
+  unsigned CurrentPackMax = std::numeric_limits<unsigned>::max();

  /// When zero, we're printing template args and '>' needs to be parenthesized.
  /// Use a counter so we can simply increment inside parentheses.
@@ -1,4 +1,4 @@
-# SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+# SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
 # SPDX-License-Identifier: GPL-3.0-or-later

 # SPDX-FileCopyrightText: 2021 yuzu Emulator Project
@@ -11,105 +11,63 @@ set(FFmpeg_HWACCEL_FLAGS)
 set(FFmpeg_HWACCEL_INCLUDE_DIRS)
 set(FFmpeg_HWACCEL_LDFLAGS)

-if (NOT YUZU_USE_BUNDLED_FFMPEG)
-    set(FFmpeg_CROSS_COMPILE_FLAGS "")
-    if (ANDROID)
-        # TODO: Maybe use CMAKE_SYSROOT? and probably provide a toolchain file for android
-        # I mean isn't that the "proper" way anyways?
-        string(TOLOWER "${CMAKE_HOST_SYSTEM_NAME}" FFmpeg_HOST_SYSTEM_NAME)
-        set(TOOLCHAIN "${ANDROID_NDK}/toolchains/llvm/prebuilt/${FFmpeg_HOST_SYSTEM_NAME}-${CMAKE_HOST_SYSTEM_PROCESSOR}")
-        set(SYSROOT "${TOOLCHAIN}/sysroot")
-        set(FFmpeg_CPU "armv8-a")
-        list(APPEND FFmpeg_CROSS_COMPILE_FLAGS
-            --enable-cross-compile
-            --arch=arm64
-            #--cpu=${FFmpeg_CPU}
-            --cross-prefix="${TOOLCHAIN}/bin/aarch64-linux-android-"
-            --sysroot="${SYSROOT}"
-            --target-os=android
-            --extra-ldflags="--ld-path=${TOOLCHAIN}/bin/ld.lld"
-            --extra-ldflags="-nostdlib"
-        )
-        set(FFmpeg_IS_CROSS_COMPILING TRUE)
-    # User attempts to do a FFmpeg cross compilation because...
-    # Here we just quickly test against host/system processors not matching
-    # TODO: Test for versions not matching as well?
-    elseif (NOT (CMAKE_HOST_SYSTEM_PROCESSOR MATCHES CMAKE_SYSTEM_PROCESSOR
-    AND CMAKE_HOST_SYSTEM_NAME MATCHES CMAKE_SYSTEM_NAME))
-        string(TOLOWER "${CMAKE_SYSTEM_NAME}" FFmpeg_SYSTEM_NAME)
-        if (FFmpeg_SYSTEM_NAME STREQUAL "openorbis" OR FFmpeg_SYSTEM_NAME STREQUAL "managarm")
-            set(FFmpeg_SYSTEM_NAME "none")
-        endif()
-        # TODO: Can we really do better? Auto-detection? Something clever?
-        list(APPEND FFmpeg_CROSS_COMPILE_FLAGS
-            --enable-cross-compile
-            --arch="${CMAKE_SYSTEM_PROCESSOR}"
-            --target-os="${FFmpeg_SYSTEM_NAME}"
-            --sysroot="${CMAKE_SYSROOT}"
-        )
-        if (DEFINED FFmpeg_CROSS_PREFIX)
-            list(APPEND FFmpeg_CROSS_COMPILE_FLAGS --cross-prefix="${FFmpeg_CROSS_PREFIX}")
-        else()
-            message(WARNING "Please set FFmpeg_CROSS_PREFIX to your cross toolchain prefix, for example: \${CMAKE_STAGING_PREFIX}/bin/${CMAKE_SYSTEM_PROCESSOR}-${CMAKE_SYSTEM_NAME}-")
-        endif()
-        set(FFmpeg_IS_CROSS_COMPILING TRUE)
-    endif()
-endif()
-
-if (PLATFORM_PS4 OR PLATFORM_MANAGARM)
-    # Doesn't support VA-API, don't go thru the embarrassment of trying to enable it
-    list(APPEND FFmpeg_HWACCEL_FLAGS --disable-vaapi)
-elseif (UNIX AND NOT DEFINED FFmpeg_IS_CROSS_COMPILING)
+if (UNIX AND NOT ANDROID)
    find_package(PkgConfig REQUIRED)
-    pkg_check_modules(LIBVA libva)
-    pkg_check_modules(CUDA cuda)
-    pkg_check_modules(FFNVCODEC ffnvcodec)
-    pkg_check_modules(VDPAU vdpau)
+    if (NOT ANDROID)
+        pkg_check_modules(LIBVA libva)
+        pkg_check_modules(CUDA cuda)
+        pkg_check_modules(FFNVCODEC ffnvcodec)
+        pkg_check_modules(VDPAU vdpau)
+    endif()

-    find_package(X11)
-    if(X11_FOUND)
-        if (NOT APPLE)
-            # In Solaris needs explicit linking for ffmpeg which links to /lib/amd64/libX11.so
-            if(PLATFORM_SUN)
+    if (NOT APPLE)
+        # In Solaris needs explicit linking for ffmpeg which links to /lib/amd64/libX11.so
+        if(PLATFORM_SUN)
+            find_library(LIBDRM_LIB libdrm PATHS /usr/lib/64 /usr/lib/amd64 /usr/lib)
+            if(LIBDRM_LIB)
                list(APPEND FFmpeg_HWACCEL_LIBRARIES
                    X11
-                    "${CMAKE_SYSROOT}/usr/lib/xorg/amd64/libdrm.so")
+                    "${LIBDRM_LIB}")
+                message(STATUS "Found libdrm at: ${LIBDRM_LIB}")
            else()
-                pkg_check_modules(LIBDRM libdrm REQUIRED)
-                list(APPEND FFmpeg_HWACCEL_LIBRARIES
-                    ${LIBDRM_LIBRARIES})
-                list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
-                    ${LIBDRM_INCLUDE_DIRS})
+                message(WARNING "libdrm not found, disabling libdrm support")
+                list(APPEND FFmpeg_HWACCEL_FLAGS
+                    --disable-libdrm)
            endif()
+        else()
+            pkg_check_modules(LIBDRM libdrm REQUIRED)
+            list(APPEND FFmpeg_HWACCEL_LIBRARIES
+                ${LIBDRM_LIBRARIES})
+            list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
+                ${LIBDRM_INCLUDE_DIRS})
            list(APPEND FFmpeg_HWACCEL_FLAGS
                --enable-libdrm)
        endif()
-        if(LIBVA_FOUND)
-            pkg_check_modules(LIBVA-DRM libva-drm REQUIRED)
-            pkg_check_modules(LIBVA-X11 libva-x11 REQUIRED)
-            list(APPEND FFmpeg_HWACCEL_LIBRARIES
-                ${X11_LIBRARIES}
-                ${LIBVA-DRM_LIBRARIES}
-                ${LIBVA-X11_LIBRARIES}
-                ${LIBVA_LIBRARIES})
-            list(APPEND FFmpeg_HWACCEL_FLAGS
-                --enable-hwaccel=h264_vaapi
-                --enable-hwaccel=vp8_vaapi
-                --enable-hwaccel=vp9_vaapi)
-            list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
-                ${X11_INCLUDE_DIRS}
-                ${LIBVA-DRM_INCLUDE_DIRS}
-                ${LIBVA-X11_INCLUDE_DIRS}
-                ${LIBVA_INCLUDE_DIRS}
-            )
-            message(STATUS "ffmpeg: va-api libraries version ${LIBVA_VERSION} found")
-        else()
-            list(APPEND FFmpeg_HWACCEL_FLAGS --disable-vaapi)
-            message(WARNING "ffmpeg: libva-dev not found, disabling Video Acceleration API (VA-API)...")
-        endif()
+    endif()
+
+    if(LIBVA_FOUND)
+        find_package(X11 REQUIRED)
+        pkg_check_modules(LIBVA-DRM libva-drm REQUIRED)
+        pkg_check_modules(LIBVA-X11 libva-x11 REQUIRED)
+        list(APPEND FFmpeg_HWACCEL_LIBRARIES
+            ${X11_LIBRARIES}
+            ${LIBVA-DRM_LIBRARIES}
+            ${LIBVA-X11_LIBRARIES}
+            ${LIBVA_LIBRARIES})
+        list(APPEND FFmpeg_HWACCEL_FLAGS
+            --enable-hwaccel=h264_vaapi
+            --enable-hwaccel=vp8_vaapi
+            --enable-hwaccel=vp9_vaapi)
+        list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
+            ${X11_INCLUDE_DIRS}
+            ${LIBVA-DRM_INCLUDE_DIRS}
+            ${LIBVA-X11_INCLUDE_DIRS}
+            ${LIBVA_INCLUDE_DIRS}
+        )
+        message(STATUS "ffmpeg: va-api libraries version ${LIBVA_VERSION} found")
    else()
        list(APPEND FFmpeg_HWACCEL_FLAGS --disable-vaapi)
-        message(WARNING "ffmpeg: X11 libraries not found, disabling VA-API...")
+        message(WARNING "ffmpeg: libva-dev not found, disabling Video Acceleration API (VA-API)...")
    endif()

    if (FFNVCODEC_FOUND)
@@ -153,28 +111,6 @@ elseif (UNIX AND NOT DEFINED FFmpeg_IS_CROSS_COMPILING)
    endif()
 endif()

-if (PLATFORM_PS4)
-    list(APPEND FFmpeg_CROSS_COMPILE_LIBS
-        -lkernel
-        -lSceUserService
-        -lSceSysmodule
-        -lSceNet
-        -lSceLibcInternal
-    )
-    list(APPEND FFmpeg_CROSS_COMPILE_FLAGS
-        --disable-pthreads
-        --extra-cflags=${CMAKE_SYSROOT}/usr/include
-        --extra-cxxflags=${CMAKE_SYSROOT}/usr/include
-        --extra-libs="${FFmpeg_CROSS_COMPILE_LIBS}"
-    )
-elseif (PLATFORM_MANAGARM)
-    # Required for proper stuff
-    list(APPEND FFmpeg_CROSS_COMPILE_FLAGS 
-        --disable-pthreads
-        --extra-libs="${FFmpeg_CROSS_COMPILE_LIBS}"
-    )
-endif()
-
 if (YUZU_USE_BUNDLED_FFMPEG)
    AddJsonPackage(ffmpeg-ci)

@@ -245,6 +181,24 @@ else()

    find_program(BASH_PROGRAM bash REQUIRED)

+    set(FFmpeg_CROSS_COMPILE_FLAGS "")
+    if (ANDROID)
+        string(TOLOWER "${CMAKE_HOST_SYSTEM_NAME}" FFmpeg_HOST_SYSTEM_NAME)
+        set(TOOLCHAIN "${ANDROID_NDK}/toolchains/llvm/prebuilt/${FFmpeg_HOST_SYSTEM_NAME}-${CMAKE_HOST_SYSTEM_PROCESSOR}")
+        set(SYSROOT "${TOOLCHAIN}/sysroot")
+        set(FFmpeg_CPU "armv8-a")
+        list(APPEND FFmpeg_CROSS_COMPILE_FLAGS
+            --arch=arm64
+            #--cpu=${FFmpeg_CPU}
+            --enable-cross-compile
+            --cross-prefix=${TOOLCHAIN}/bin/aarch64-linux-android-
+            --sysroot=${SYSROOT}
+            --target-os=android
+            --extra-ldflags="--ld-path=${TOOLCHAIN}/bin/ld.lld"
+            --extra-ldflags="-nostdlib"
+        )
+    endif()
+
    # `configure` parameters builds only exactly what yuzu needs from FFmpeg
    # `--disable-vdpau` is needed to avoid linking issues
    set(FFmpeg_CC ${CMAKE_C_COMPILER_LAUNCHER}  ${CMAKE_C_COMPILER})
@@ -267,12 +221,8 @@ else()
                --enable-decoder=vp9
                --enable-filter=yadif,scale
                --enable-pic
-                --cc=${FFmpeg_CC}
-                --cxx=${FFmpeg_CXX}
-                --ld=${CMAKE_LINKER}
-                --extra-cflags=${CMAKE_C_FLAGS}
-                --extra-cxxflags=${CMAKE_CXX_FLAGS}
-                --extra-ldflags=${CMAKE_C_LINK_FLAGS}
+                --cc="${FFmpeg_CC}"
+                --cxx="${FFmpeg_CXX}"
                ${FFmpeg_HWACCEL_FLAGS}
                ${FFmpeg_CROSS_COMPILE_FLAGS}
        WORKING_DIRECTORY
@@ -304,7 +254,7 @@ else()
        OUTPUT
            ${FFmpeg_BUILD_LIBRARIES}
        COMMAND
-            gmake ${FFmpeg_MAKE_ARGS}
+            make ${FFmpeg_MAKE_ARGS}
        WORKING_DIRECTORY
            ${FFmpeg_BUILD_DIR}
    )
@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: 2023 yuzu Emulator Project
 // SPDX-FileCopyrightText: 1996 Arthur David Olson
 // SPDX-License-Identifier: BSD-2-Clause
@@ -469,8 +466,8 @@ CalendarTimeInternal* timesub(const time_t* timep, s64 offset, const Rule* sp,
        int signed_y = static_cast<s32>(y);
        tmp->tm_year = signed_y - TM_YEAR_BASE;
    }
-    else if ((!std::is_signed_v<time_t> || (std::numeric_limits<s32>::min)() + TM_YEAR_BASE <= y) &&
-        y - TM_YEAR_BASE <= (std::numeric_limits<s32>::max)()) {
+    else if ((!std::is_signed_v<time_t> || std::numeric_limits<s32>::min() + TM_YEAR_BASE <= y) &&
+        y - TM_YEAR_BASE <= std::numeric_limits<s32>::max()) {
        tmp->tm_year = static_cast<s32>(y - TM_YEAR_BASE);
    }
    else {
@@ -561,8 +558,8 @@ CalendarTimeInternal* localsub(Rule const* sp, time_t const* timep, s64 setname,
            else {
                newy += years;
            }
-            if (!((std::numeric_limits<s32>::min)() <= newy &&
-                newy <= (std::numeric_limits<s32>::max)())) {
+            if (!(std::numeric_limits<s32>::min() <= newy &&
+                newy <= std::numeric_limits<s32>::max())) {
                return nullptr;
            }
            result->tm_year = static_cast<s32>(newy);
@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: 2023 yuzu Emulator Project
 // SPDX-FileCopyrightText: 1996 Arthur David Olson
 // SPDX-License-Identifier: BSD-2-Clause
@@ -29,10 +26,10 @@ constexpr size_t TZ_MAX_CHARS = 50;
 constexpr size_t MY_TZNAME_MAX = 255;
 constexpr size_t TZNAME_MAXIMUM = 255;
 constexpr size_t TZ_MAX_LEAPS = 50;
-constexpr s64 TIME_T_MAX = (std::numeric_limits<s64>::max)();
-constexpr s64 TIME_T_MIN = (std::numeric_limits<s64>::min)();
+constexpr s64 TIME_T_MAX = std::numeric_limits<s64>::max();
+constexpr s64 TIME_T_MIN = std::numeric_limits<s64>::min();
 constexpr size_t CHARS_EXTRA = 3;
-constexpr size_t MAX_ZONE_CHARS = (std::max)(TZ_MAX_CHARS + CHARS_EXTRA, sizeof("UTC"));
+constexpr size_t MAX_ZONE_CHARS = std::max(TZ_MAX_CHARS + CHARS_EXTRA, sizeof("UTC"));
 constexpr size_t MAX_TZNAME_CHARS = 2 * (MY_TZNAME_MAX + 1);

 struct ttinfo {
@@ -54,7 +51,7 @@ struct Rule {
    std::array<s64, TZ_MAX_TIMES> ats;
    std::array<u8, TZ_MAX_TIMES> types;
    std::array<ttinfo, TZ_MAX_TYPES> ttis;
-    std::array<char, (std::max)(MAX_ZONE_CHARS, MAX_TZNAME_CHARS)> chars;
+    std::array<char, std::max(MAX_ZONE_CHARS, MAX_TZNAME_CHARS)> chars;
    s32 defaulttype;
    std::array <u8, 0x12C4> padding1;
 };
@@ -8,7 +8,7 @@
 include_directories(.)

 # Dynarmic
-if ((ARCHITECTURE_x86_64 OR ARCHITECTURE_arm64 OR ARCHITECTURE_riscv64) AND NOT YUZU_STATIC_ROOM)
+if (ARCHITECTURE_x86_64 OR ARCHITECTURE_arm64 AND NOT YUZU_STATIC_ROOM)
    add_subdirectory(dynarmic)
    add_library(dynarmic::dynarmic ALIAS dynarmic)
 endif()
@@ -25,16 +25,6 @@ if (NIGHTLY_BUILD)
    add_compile_definitions(NIGHTLY_BUILD)
 endif()

-if (YUZU_LEGACY)
-    message(WARNING "Making legacy build. Performance may suffer.")
-    add_compile_definitions(YUZU_LEGACY)
-endif()
-
-if (GENSHIN_SPOOF)
-    message(WARNING "Making Genshin spoof build")
-    add_compile_definitions(GENSHIN_SPOOF)
-endif()
-
 # Set compilation flags
 if (MSVC AND NOT CXX_CLANG)
    set(CMAKE_CONFIGURATION_TYPES Debug Release CACHE STRING "" FORCE)
@@ -185,7 +175,7 @@ else()
        add_compile_definitions(_FILE_OFFSET_BITS=64)
    endif()

-    if (YUZU_STATIC_BUILD AND NOT APPLE AND NOT MSVC)
+    if (YUZU_STATIC_BUILD AND NOT APPLE)
        add_compile_options(-static)

        # yuzu-cmd requires us to explicitly link libpthread, libgcc, and libstdc++ as static
@@ -203,12 +203,6 @@ android {
            resValue("string", "app_name_suffixed", "Eden Optimized")
            applicationId = "com.miHoYo.Yuanshen"

-            externalNativeBuild {
-                cmake {
-                    arguments.add("-DGENSHIN_SPOOF=ON")
-                }
-            }
-
            ndk {
                abiFilters += listOf("arm64-v8a")
            }
@@ -33,19 +33,6 @@ import org.yuzu.yuzu_emu.applets.web.WebBrowser
 * with the native side of the Yuzu code.
 */
 object NativeLibrary {
-    @Keep
-    data class UpdateResult(
-        var tag: String = "",
-        var title: String = "",
-        var body: String = "",
-        var url: String = "",
-        var assets: MutableList<String> = mutableListOf()
-    ) {
-        fun addAsset(asset: String) {
-            assets.add(asset)
-        }
-    }
-
    @JvmField
    var sEmulationActivity = WeakReference<EmulationActivity?>(null)

@@ -253,7 +240,17 @@ object NativeLibrary {
    /**
     * Checks for available updates.
     */
-    external fun checkForUpdate(): UpdateResult?
+    external fun checkForUpdate(): Array<String>?
+
+    /**
+     * Return the URL to the release page
+     */
+    external fun getUpdateUrl(version: String): String
+
+    /**
+     * Return the URL to download the APK for the given version
+     */
+    external fun getUpdateApkUrl(tag: String, artifact: String, packageId: String): String

    /**
     * Returns whether the update checker is enabled through CMAKE options.
@@ -15,7 +15,6 @@ import android.content.BroadcastReceiver
 import android.content.Context
 import android.content.Intent
 import android.content.IntentFilter
-import android.content.pm.PackageManager
 import android.content.res.Configuration
 import android.graphics.Rect
 import android.graphics.drawable.Icon
@@ -101,7 +100,6 @@ class EmulationActivity : AppCompatActivity(), SensorEventListener, InputManager
    private var romSwapGeneration = 0
    private var hasEmulationSession = processHasEmulationSession
    private val romSwapStopTimeoutRunnable = Runnable { onRomSwapStopTimeout() }
-    private val pictureInPictureFailureActions: MutableSet<String> = mutableSetOf()

    private fun onRomSwapStopTimeout() {
        if (!isWaitingForRomSwapStop) {
@@ -248,7 +246,6 @@ class EmulationActivity : AppCompatActivity(), SensorEventListener, InputManager
        nfcReader.startScanning()
        startMotionSensorListener()
        InputHandler.updateControllerData()
-        notifyPhysicalControllerState()

        buildPictureInPictureParams()
    }
@@ -268,18 +265,12 @@ class EmulationActivity : AppCompatActivity(), SensorEventListener, InputManager
    }

    override fun onUserLeaveHint() {
-        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.S ||
-            !isPictureInPictureSupported() ||
-            !BooleanSetting.PICTURE_IN_PICTURE.getBoolean() ||
-            isInPictureInPictureMode
-        ) {
-            return
-        }
-
-        val pictureInPictureParamsBuilder = PictureInPictureParams.Builder()
-            .getPictureInPictureActionsBuilder().getPictureInPictureAspectBuilder()
-        runPictureInPictureAction("enter picture-in-picture mode") {
-            enterPictureInPictureMode(pictureInPictureParamsBuilder.build())
+        if (Build.VERSION.SDK_INT < Build.VERSION_CODES.S) {
+            if (BooleanSetting.PICTURE_IN_PICTURE.getBoolean() && !isInPictureInPictureMode) {
+                val pictureInPictureParamsBuilder = PictureInPictureParams.Builder()
+                    .getPictureInPictureActionsBuilder().getPictureInPictureAspectBuilder()
+                enterPictureInPictureMode(pictureInPictureParamsBuilder.build())
+            }
        }
    }

@@ -412,7 +403,8 @@ class EmulationActivity : AppCompatActivity(), SensorEventListener, InputManager
        val isPhysicalKeyboard = event.source and InputDevice.SOURCE_KEYBOARD == InputDevice.SOURCE_KEYBOARD &&
                                event.device?.isVirtual == false

-        val isControllerInput = InputHandler.isPhysicalGameController(event.device)
+        val isControllerInput = event.source and InputDevice.SOURCE_JOYSTICK == InputDevice.SOURCE_JOYSTICK ||
+            event.source and InputDevice.SOURCE_GAMEPAD == InputDevice.SOURCE_GAMEPAD

        if (!isControllerInput &&
            event.source and InputDevice.SOURCE_MOUSE != InputDevice.SOURCE_MOUSE &&
@@ -433,7 +425,8 @@ class EmulationActivity : AppCompatActivity(), SensorEventListener, InputManager
    }

    override fun dispatchGenericMotionEvent(event: MotionEvent): Boolean {
-        val isControllerInput = InputHandler.isPhysicalGameController(event.device)
+        val isControllerInput = event.source and InputDevice.SOURCE_JOYSTICK == InputDevice.SOURCE_JOYSTICK ||
+            event.source and InputDevice.SOURCE_GAMEPAD == InputDevice.SOURCE_GAMEPAD

        if (!isControllerInput &&
            event.source and InputDevice.SOURCE_KEYBOARD != InputDevice.SOURCE_KEYBOARD &&
@@ -467,36 +460,38 @@ class EmulationActivity : AppCompatActivity(), SensorEventListener, InputManager
    }

    private fun isGameController(deviceId: Int): Boolean {
-        return InputHandler.isPhysicalGameController(InputDevice.getDevice(deviceId))
+        val device = InputDevice.getDevice(deviceId) ?: return false
+        val sources = device.sources
+        return sources and InputDevice.SOURCE_GAMEPAD == InputDevice.SOURCE_GAMEPAD ||
+            sources and InputDevice.SOURCE_JOYSTICK == InputDevice.SOURCE_JOYSTICK
    }

    override fun onInputDeviceAdded(deviceId: Int) {
        if (isGameController(deviceId)) {
            InputHandler.updateControllerData()
-            notifyPhysicalControllerState()
+            val navHostFragment =
+                supportFragmentManager.findFragmentById(R.id.fragment_container) as? NavHostFragment
+            val emulationFragment =
+                navHostFragment?.childFragmentManager?.fragments?.firstOrNull() as? org.yuzu.yuzu_emu.fragments.EmulationFragment
+            emulationFragment?.onControllerConnected()
        }
    }

    override fun onInputDeviceRemoved(deviceId: Int) {
        InputHandler.updateControllerData()
-        notifyPhysicalControllerState()
+        val navHostFragment =
+            supportFragmentManager.findFragmentById(R.id.fragment_container) as? NavHostFragment
+        val emulationFragment =
+            navHostFragment?.childFragmentManager?.fragments?.firstOrNull() as? org.yuzu.yuzu_emu.fragments.EmulationFragment
+        emulationFragment?.onControllerDisconnected()
    }

    override fun onInputDeviceChanged(deviceId: Int) {
        if (isGameController(deviceId)) {
            InputHandler.updateControllerData()
-            notifyPhysicalControllerState()
        }
    }

-    private fun notifyPhysicalControllerState() {
-        val navHostFragment =
-            supportFragmentManager.findFragmentById(R.id.fragment_container) as? NavHostFragment
-        val emulationFragment =
-            navHostFragment?.childFragmentManager?.fragments?.firstOrNull() as? org.yuzu.yuzu_emu.fragments.EmulationFragment
-        emulationFragment?.onPhysicalControllerStateChanged(InputHandler.androidControllers.isNotEmpty())
-    }
-
    override fun onSensorChanged(event: SensorEvent) {
        if (!NativeLibrary.isRunning() || NativeLibrary.isPaused()) {
            return
@@ -659,29 +654,7 @@ class EmulationActivity : AppCompatActivity(), SensorEventListener, InputManager
        return this.apply { setActions(pictureInPictureActions) }
    }

-    private fun isPictureInPictureSupported() =
-        Build.VERSION.SDK_INT >= Build.VERSION_CODES.O &&
-            packageManager.hasSystemFeature(PackageManager.FEATURE_PICTURE_IN_PICTURE)
-
-    private fun runPictureInPictureAction(actionName: String, action: () -> Unit) {
-        try {
-            action()
-        } catch (e: IllegalStateException) {
-            if (pictureInPictureFailureActions.add(actionName)) {
-                Log.warning("[PiP] Failed to $actionName: ${e.message}")
-            }
-        } catch (e: UnsupportedOperationException) {
-            if (pictureInPictureFailureActions.add(actionName)) {
-                Log.warning("[PiP] Failed to $actionName: ${e.message}")
-            }
-        }
-    }
-
    fun buildPictureInPictureParams() {
-        if (!isPictureInPictureSupported()) {
-            return
-        }
-
        val pictureInPictureParamsBuilder = PictureInPictureParams.Builder()
            .getPictureInPictureActionsBuilder().getPictureInPictureAspectBuilder()
        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.S) {
@@ -691,9 +664,7 @@ class EmulationActivity : AppCompatActivity(), SensorEventListener, InputManager
                BooleanSetting.PICTURE_IN_PICTURE.getBoolean() && isEmulationActive
            )
        }
-        runPictureInPictureAction("set picture-in-picture params") {
-            setPictureInPictureParams(pictureInPictureParamsBuilder.build())
-        }
+        setPictureInPictureParams(pictureInPictureParamsBuilder.build())
    }

    fun displayMultiplayerDialog() {
@@ -1,7 +1,3 @@
-
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: Copyright 2023 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later

@@ -37,10 +33,8 @@ object SoftwareKeyboard {
        val emulationActivity = NativeLibrary.sEmulationActivity.get()

        val overlayView = emulationActivity!!.findViewById<View>(R.id.surface_input_overlay)
-        overlayView.requestFocus()
        val im =
            overlayView.context.getSystemService(Context.INPUT_METHOD_SERVICE) as InputMethodManager
-        im.restartInput(overlayView)
        im.showSoftInput(overlayView, InputMethodManager.SHOW_FORCED)

        // There isn't a good way to know that the IMM is dismissed, so poll every 500ms to submit inline keyboard result.
@@ -57,8 +57,7 @@ class QuickSettings(val emulationFragment: EmulationFragment) {
        container: ViewGroup,
        setting: IntSetting,
        namesArrayId: Int,
-        valuesArrayId: Int,
-        onValueChanged: ((Int) -> Unit)? = null
+        valuesArrayId: Int
    ) {
        val inflater = LayoutInflater.from(emulationFragment.requireContext())
        val itemView = inflater.inflate(R.layout.item_quick_settings_menu, container, false)
@@ -90,7 +89,6 @@ class QuickSettings(val emulationFragment: EmulationFragment) {
                    setting.setInt(values[index])
                    saveSettings()
                    valueView.text = name
-                    onValueChanged?.invoke(values[index])
                }
            }
            radioGroup.addView(radioButton)
@@ -17,15 +17,11 @@ enum class BooleanSetting(override val key: String) : AbstractBooleanSetting {
    USE_CUSTOM_CPU_TICKS("use_custom_cpu_ticks"),
    SKIP_CPU_INNER_INVALIDATION("skip_cpu_inner_invalidation"),
    FIX_BLOOM_EFFECTS("fix_bloom_effects"),
-    EMULATE_BGR565("emulate_bgr565"),
-    RESCALE_HACK("rescale_hack"),
    CPUOPT_UNSAFE_HOST_MMU("cpuopt_unsafe_host_mmu"),
    USE_DOCKED_MODE("use_docked_mode"),
    USE_AUTO_STUB("use_auto_stub"),
    RENDERER_USE_DISK_SHADER_CACHE("use_disk_shader_cache"),
    RENDERER_FORCE_MAX_CLOCK("force_max_clock"),
-    RENDERER_ASYNCHRONOUS_GPU_EMULATION("use_asynchronous_gpu_emulation"),
-    RENDERER_ASYNC_PRESENTATION("async_presentation"),
    RENDERER_ASYNCHRONOUS_SHADERS("use_asynchronous_shaders"),
    RENDERER_REACTIVE_FLUSHING("use_reactive_flushing"),
    ENABLE_BUFFER_HISTORY("enable_buffer_history"),
@@ -35,6 +31,8 @@ enum class BooleanSetting(override val key: String) : AbstractBooleanSetting {
    RENDERER_DEBUG("debug"),
    RENDERER_PATCH_OLD_QCOM_DRIVERS("patch_old_qcom_drivers"),
    RENDERER_VERTEX_INPUT_DYNAMIC_STATE("vertex_input_dynamic_state"),
+    RENDERER_PROVOKING_VERTEX("provoking_vertex"),
+    RENDERER_DESCRIPTOR_INDEXING("descriptor_indexing"),
    RENDERER_SAMPLE_SHADING("sample_shading"),
    GPU_UNSWIZZLE_ENABLED("gpu_unswizzle_enabled"),
    PICTURE_IN_PICTURE("picture_in_picture"),
@@ -17,6 +17,7 @@ enum class IntSetting(override val key: String) : AbstractIntSetting {
    RENDERER_VRAM_USAGE_MODE("vram_usage_mode"),
    RENDERER_NVDEC_EMULATION("nvdec_emulation"),
    RENDERER_ASTC_DECODE_METHOD("accelerate_astc"),
+    RENDERER_ASTC_RECOMPRESSION("astc_recompression"),
    RENDERER_ACCURACY("gpu_accuracy"),
    RENDERER_RESOLUTION("resolution_setup"),
    RENDERER_VSYNC("use_vsync"),
@@ -24,6 +25,7 @@ enum class IntSetting(override val key: String) : AbstractIntSetting {
    RENDERER_ANTI_ALIASING("anti_aliasing"),
    RENDERER_SCREEN_LAYOUT("screen_layout"),
    RENDERER_ASPECT_RATIO("aspect_ratio"),
+    RENDERER_OPTIMIZE_SPIRV_OUTPUT("optimize_spirv_output"),

    RENDERER_DYNA_STATE("dyna_state"),
    DMA_ACCURACY("dma_accuracy"),
@@ -67,8 +69,7 @@ enum class IntSetting(override val key: String) : AbstractIntSetting {
    MY_PAGE_APPLET("my_page_applet_mode"),
    INPUT_OVERLAY_AUTO_HIDE("input_overlay_auto_hide"),
    OVERLAY_GRID_SIZE("overlay_grid_size"),
-    GPU_LOG_RING_BUFFER_SIZE("gpu_log_ring_buffer_size"),
-    ANDROID_PIPELINE_WORKERS("pipeline_worker_count")
+    GPU_LOG_RING_BUFFER_SIZE("gpu_log_ring_buffer_size")
    ;

    override fun getInt(needsGlobal: Boolean): Int = NativeConfig.getInt(key, needsGlobal)
@@ -141,6 +141,13 @@ abstract class SettingsItem(
                    valuesId = R.array.dynaStateValues
                )
            )
+            put(
+                SwitchSetting(
+                    BooleanSetting.RENDERER_PROVOKING_VERTEX,
+                    titleId = R.string.provoking_vertex,
+                    descriptionId = R.string.provoking_vertex_description
+                )
+            )
            put(
                SwitchSetting(
                    BooleanSetting.RENDERER_VERTEX_INPUT_DYNAMIC_STATE,
@@ -148,6 +155,13 @@ abstract class SettingsItem(
                    descriptionId = R.string.vertex_input_dynamic_state_description
                )
            )
+            put(
+                SwitchSetting(
+                    BooleanSetting.RENDERER_DESCRIPTOR_INDEXING,
+                    titleId = R.string.descriptor_indexing,
+                    descriptionId = R.string.descriptor_indexing_description
+                )
+            )
            put(
                SliderSetting(
                    IntSetting.RENDERER_SAMPLE_SHADING,
@@ -335,6 +349,15 @@ abstract class SettingsItem(
                    valuesId = R.array.astcDecodingMethodValues
                )
            )
+            put(
+                SingleChoiceSetting(
+                    IntSetting.RENDERER_ASTC_RECOMPRESSION,
+                    titleId = R.string.astc_recompression,
+                    descriptionId = R.string.astc_recompression_description,
+                    choicesId = R.array.astcRecompressionMethodNames,
+                    valuesId = R.array.astcRecompressionMethodValues
+                )
+            )
            put(
                SingleChoiceSetting(
                    IntSetting.RENDERER_VRAM_USAGE_MODE,
@@ -582,16 +605,6 @@ abstract class SettingsItem(
                    units = "%"
                )
            )
-            put(
-                SliderSetting(
-                    IntSetting.ANDROID_PIPELINE_WORKERS,
-                    titleId = R.string.pipeline_worker_cores,
-                    descriptionId = R.string.pipeline_worker_cores_description,
-                    min = 4,
-                    max = 8,
-                    units = "cores"
-                )
-            )
            put(
                SingleChoiceSetting(
                    IntSetting.RENDERER_ANTI_ALIASING,
@@ -640,17 +653,12 @@ abstract class SettingsItem(
                )
            )
            put(
-                SwitchSetting(
-                    BooleanSetting.RENDERER_ASYNCHRONOUS_GPU_EMULATION,
-                    titleId = R.string.renderer_asynchronous_gpu_emulation,
-                    descriptionId = R.string.renderer_asynchronous_gpu_emulation_description
-                )
-            )
-            put(
-                SwitchSetting(
-                    BooleanSetting.RENDERER_ASYNC_PRESENTATION,
-                    titleId = R.string.renderer_async_presentation,
-                    descriptionId = R.string.renderer_async_presentation_description
+                SingleChoiceSetting(
+                    IntSetting.RENDERER_OPTIMIZE_SPIRV_OUTPUT,
+                    titleId = R.string.renderer_optimize_spirv_output,
+                    descriptionId = R.string.renderer_optimize_spirv_output_description,
+                    choicesId = R.array.optimizeSpirvOutputEntries,
+                    valuesId = R.array.optimizeSpirvOutputValues
                )
            )
            put(
@@ -757,20 +765,6 @@ abstract class SettingsItem(
                    descriptionId = R.string.fix_bloom_effects_description
                )
            )
-            put(
-                SwitchSetting(
-                    BooleanSetting.RESCALE_HACK,
-                    titleId = R.string.rescale_hack,
-                    descriptionId = R.string.rescale_hack_description
-                )
-            )
-            put(
-                SwitchSetting(
-                    BooleanSetting.EMULATE_BGR565,
-                    titleId = R.string.emulate_bgr565,
-                    descriptionId = R.string.emulate_bgr565_description
-                )
-            )
            put(
                SwitchSetting(
                    BooleanSetting.CPUOPT_UNSAFE_HOST_MMU,
@@ -29,7 +29,6 @@ import org.yuzu.yuzu_emu.databinding.DialogSliderBinding
 import org.yuzu.yuzu_emu.databinding.DialogSpinboxBinding
 import org.yuzu.yuzu_emu.features.input.NativeInput
 import org.yuzu.yuzu_emu.features.input.model.AnalogDirection
-import org.yuzu.yuzu_emu.features.settings.model.IntSetting
 import org.yuzu.yuzu_emu.features.settings.model.view.AnalogInputSetting
 import org.yuzu.yuzu_emu.features.settings.model.view.ButtonInputSetting
 import org.yuzu.yuzu_emu.features.settings.model.view.IntSingleChoiceSetting
@@ -382,10 +381,6 @@ class SettingsDialogFragment : DialogFragment(), DialogInterface.OnClickListener
                }
                scSetting.setSelectedValue(value)

-                if (scSetting.setting.key == IntSetting.RENDERER_SCALING_FILTER.key) {
-                    settingsViewModel.setShouldReloadSettingsList(true)
-                }
-
                if (scSetting.setting.key == "app_language") {
                    settingsViewModel.setShouldRecreateForLanguageChange(true)
                    // recreate page apply language change instantly
@@ -58,38 +58,19 @@ class SettingsFragmentPresenter(
        val pairedSettingKey = item.setting.pairedSettingKey

        if (pairedSettingKey.isNotEmpty()) {
-            val needsGlobal = getNeedsGlobalForKey(pairedSettingKey)
            val pairedSettingValue = NativeConfig.getBoolean(
                pairedSettingKey,
-                needsGlobal
+                if (NativeLibrary.isRunning() && !NativeConfig.isPerGameConfigLoaded()) {
+                    !NativeConfig.usingGlobal(pairedSettingKey)
+                } else {
+                    NativeConfig.usingGlobal(pairedSettingKey)
+                }
            )
            if (!pairedSettingValue) return
        }
        add(item)
    }

-    private fun getNeedsGlobalForKey(key: String): Boolean {
-        return if (NativeLibrary.isRunning() && !NativeConfig.isPerGameConfigLoaded()) {
-            !NativeConfig.usingGlobal(key)
-        } else {
-            NativeConfig.usingGlobal(key)
-        }
-    }
-
-    private fun isFsrScalingFilterSelected(): Boolean {
-        val fsrFilterValue = resolveFsrScalingFilterValue() ?: return false
-        val needsGlobal = getNeedsGlobalForKey(IntSetting.RENDERER_SCALING_FILTER.key)
-        val selectedFilter = IntSetting.RENDERER_SCALING_FILTER.getInt(needsGlobal)
-        return selectedFilter == fsrFilterValue
-    }
-
-    private fun resolveFsrScalingFilterValue(): Int? {
-        val names = context.resources.getStringArray(R.array.rendererScalingFilterNames)
-        val values = context.resources.getIntArray(R.array.rendererScalingFilterValues)
-        val fsrIndex = names.indexOf(context.getString(R.string.scaling_filter_fsr))
-        return if (fsrIndex in values.indices) values[fsrIndex] else null
-    }
-
    // Allows you to show/hide abstract settings based on the paired setting key
    private fun ArrayList<SettingsItem>.addAbstract(item: SettingsItem) {
        val pairedSettingKey = item.setting.pairedSettingKey
@@ -267,10 +248,9 @@ class SettingsFragmentPresenter(
            add(IntSetting.RENDERER_RESOLUTION.key)
            add(IntSetting.RENDERER_VSYNC.key)
            add(IntSetting.RENDERER_SCALING_FILTER.key)
-            if (isFsrScalingFilterSelected()) {
-                add(IntSetting.FSR_SHARPENING_SLIDER.key)
-            }
+            add(IntSetting.FSR_SHARPENING_SLIDER.key)
            add(IntSetting.RENDERER_ANTI_ALIASING.key)
+            add(IntSetting.RENDERER_OPTIMIZE_SPIRV_OUTPUT.key)

            add(HeaderSetting(R.string.advanced))

@@ -279,6 +259,7 @@ class SettingsFragmentPresenter(
            add(IntSetting.MAX_ANISOTROPY.key)
            add(IntSetting.RENDERER_VRAM_USAGE_MODE.key)
            add(IntSetting.RENDERER_ASTC_DECODE_METHOD.key)
+            add(IntSetting.RENDERER_ASTC_RECOMPRESSION.key)

            add(BooleanSetting.SYNC_MEMORY_OPERATIONS.key)
            add(BooleanSetting.RENDERER_USE_DISK_SHADER_CACHE.key)
@@ -292,18 +273,15 @@ class SettingsFragmentPresenter(
            add(IntSetting.FAST_GPU_TIME.key)
            add(BooleanSetting.SKIP_CPU_INNER_INVALIDATION.key)
            add(BooleanSetting.FIX_BLOOM_EFFECTS.key)
-            add(BooleanSetting.EMULATE_BGR565.key)
-            add(BooleanSetting.RESCALE_HACK.key)
            add(BooleanSetting.RENDERER_ASYNCHRONOUS_SHADERS.key)
-            add(IntSetting.ANDROID_PIPELINE_WORKERS.key)
-            add(BooleanSetting.RENDERER_ASYNCHRONOUS_GPU_EMULATION.key)
-            add(BooleanSetting.RENDERER_ASYNC_PRESENTATION.key)
            add(SettingsItem.GPU_UNSWIZZLE_COMBINED)

            add(HeaderSetting(R.string.extensions))

            add(IntSetting.RENDERER_DYNA_STATE.key)
            add(BooleanSetting.RENDERER_VERTEX_INPUT_DYNAMIC_STATE.key)
+            add(BooleanSetting.RENDERER_PROVOKING_VERTEX.key)
+            add(BooleanSetting.RENDERER_DESCRIPTOR_INDEXING.key)
            add(IntSetting.RENDERER_SAMPLE_SHADING.key)

            add(HeaderSetting(R.string.display))
@@ -90,7 +90,6 @@ import org.yuzu.yuzu_emu.utils.FileUtil
 import org.yuzu.yuzu_emu.utils.GameHelper
 import org.yuzu.yuzu_emu.utils.GameIconUtils
 import org.yuzu.yuzu_emu.utils.GpuDriverHelper
-import org.yuzu.yuzu_emu.utils.InputHandler
 import org.yuzu.yuzu_emu.utils.Log
 import org.yuzu.yuzu_emu.utils.NativeConfig
 import org.yuzu.yuzu_emu.utils.NativeFreedrenoConfig
@@ -115,8 +114,6 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
    val handler = Handler(Looper.getMainLooper())

    private var controllerInputReceived = false
-    private var hasPhysicalControllerConnected = false
-    private var overlayHiddenByPhysicalController = false

    private var _binding: FragmentEmulationBinding? = null

@@ -291,23 +288,13 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
                // Game launched via intent (check for existing custom config)
                intentGame != null -> {
                    game?.let { gameInstance ->
-                        runCatching { GameHelper.restoreContentForGame(gameInstance) }
-                            .onFailure {
-                                Log.warning(
-                                    "[EmulationFragment] Failed to restore content for intent launch: ${it.message}"
-                                )
-                            }
-
                        val customConfigFile = SettingsFile.getCustomSettingsFile(gameInstance)
                        if (customConfigFile.exists()) {
-                            shouldUseCustom = true
                            Log.info(
                                "[EmulationFragment] Found existing custom settings for ${gameInstance.title}, loading them"
                            )
                            SettingsFile.loadCustomConfig(gameInstance)
-                            NativeConfig.unloadPerGameConfig()
                        } else {
-                            shouldUseCustom = false
                            Log.info(
                                "[EmulationFragment] No custom settings found for ${gameInstance.title}, using global settings"
                            )
@@ -679,7 +666,6 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
        driverInUse = driverViewModel.selectedDriverVersion.value

        updateQuickOverlayMenuEntry(BooleanSetting.SHOW_INPUT_OVERLAY.getBoolean())
-        onPhysicalControllerStateChanged(InputHandler.androidControllers.isNotEmpty())

        binding.surfaceEmulation.holder.addCallback(this)
        binding.doneControlConfig.setOnClickListener { stopConfiguringControls() }
@@ -774,8 +760,11 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {

                R.id.menu_quick_overlay -> {
                    val newState = !BooleanSetting.SHOW_INPUT_OVERLAY.getBoolean()
+                    BooleanSetting.SHOW_INPUT_OVERLAY.setBoolean(newState)
+                    updateQuickOverlayMenuEntry(newState)
+                    binding.surfaceInputOverlay.refreshControls()
+                    // Sync view visibility with the setting
                    toggleOverlay(newState)
-                    updateQuickOverlayMenuEntry(BooleanSetting.SHOW_INPUT_OVERLAY.getBoolean())
                    NativeConfig.saveGlobalConfig()
                    true
                }
@@ -881,7 +870,7 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
                if (drawerView == binding.quickSettingsSheet) {
                    isQuickSettingsMenuOpen = true
                    if (shouldUseCustom) {
-                        SettingsFile.loadCustomConfig(game!!)
+                        SettingsFile.loadCustomConfig(args.game!!)
                    }
                }
            }
@@ -1064,8 +1053,7 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
            val shouldShowOverlay = if (args.overlayGamelessEditMode) {
                true
            } else {
-                showInputOverlay && emulationViewModel.emulationStarted.value &&
-                    !hasPhysicalControllerConnected
+                showInputOverlay && emulationViewModel.emulationStarted.value
            }
            b.surfaceInputOverlay.setVisible(shouldShowOverlay)
            if (!isInFoldableLayout) {
@@ -1090,7 +1078,6 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
    private fun addQuickSettings() {
        binding.quickSettingsSheet.apply {
            val container = binding.quickSettingsSheet.findViewById<ViewGroup>(R.id.quick_settings_container)
-            val isFsrSelected = isFsrScalingFilterSelected()

            container.removeAllViews()

@@ -1172,20 +1159,16 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
                IntSetting.RENDERER_SCALING_FILTER,
                R.array.rendererScalingFilterNames,
                R.array.rendererScalingFilterValues
-            ) {
-                addQuickSettings()
-            }
+            )

-            if (isFsrSelected) {
-                quickSettings.addSliderSetting(
-                    R.string.fsr_sharpness,
-                    container,
-                    IntSetting.FSR_SHARPENING_SLIDER,
-                    minValue = 0,
-                    maxValue = 100,
-                    units = "%"
-                )
-            }
+            quickSettings.addSliderSetting(
+                R.string.fsr_sharpness,
+                container,
+                IntSetting.FSR_SHARPENING_SLIDER,
+                minValue = 0,
+                maxValue = 100,
+                units = "%"
+            )

            quickSettings.addIntSetting(
                R.string.renderer_anti_aliasing,
@@ -1197,19 +1180,6 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
        }
    }

-    private fun isFsrScalingFilterSelected(): Boolean {
-        val fsrFilterValue = resolveFsrScalingFilterValue() ?: return false
-        val selectedFilter = IntSetting.RENDERER_SCALING_FILTER.getInt(needsGlobal = false)
-        return selectedFilter == fsrFilterValue
-    }
-
-    private fun resolveFsrScalingFilterValue(): Int? {
-        val names = resources.getStringArray(R.array.rendererScalingFilterNames)
-        val values = resources.getIntArray(R.array.rendererScalingFilterValues)
-        val fsrIndex = names.indexOf(getString(R.string.scaling_filter_fsr))
-        return if (fsrIndex in values.indices) values[fsrIndex] else null
-    }
-
    private fun openQuickSettingsMenu() {
        binding.drawerLayout.closeDrawer(binding.inGameMenu)
        binding.drawerLayout.openDrawer(binding.quickSettingsSheet)
@@ -2532,31 +2502,13 @@ class EmulationFragment : Fragment(), SurfaceHolder.Callback {
    }

    fun onControllerConnected() {
-        onPhysicalControllerStateChanged(InputHandler.androidControllers.isNotEmpty())
+        controllerInputReceived = false
    }

    fun onControllerDisconnected() {
-        onPhysicalControllerStateChanged(InputHandler.androidControllers.isNotEmpty())
-    }
-
-    fun onPhysicalControllerStateChanged(hasConnectedControllers: Boolean) {
-        hasPhysicalControllerConnected = hasConnectedControllers
+        if (!BooleanSetting.HIDE_OVERLAY_ON_CONTROLLER_INPUT.getBoolean()) return
+        if (!BooleanSetting.SHOW_INPUT_OVERLAY.getBoolean()) return
        controllerInputReceived = false
-        if (!isAdded || _binding == null) return
-        if (binding.surfaceInputOverlay.isGamelessMode()) return
-
-        if (hasConnectedControllers) {
-            if (BooleanSetting.SHOW_INPUT_OVERLAY.getBoolean() &&
-                BooleanSetting.HIDE_OVERLAY_ON_CONTROLLER_INPUT.getBoolean()) {
-                overlayHiddenByPhysicalController = true
-                toggleOverlay(false)
-            }
-            return
-        }
-
-        if (overlayHiddenByPhysicalController) {
-            overlayHiddenByPhysicalController = false
-            toggleOverlay(true)
-        }
+        toggleOverlay(true)
    }
 }
@@ -58,7 +58,6 @@ class DriverViewModel : ViewModel() {
    private val driversToDelete = mutableListOf<String>()

    private var previousDriverPath: String = ""
-    private var activeGame: Game? = null

    private val _shouldShowDriverShaderDialog = MutableStateFlow(false)
    val shouldShowDriverShaderDialog: StateFlow<Boolean> get() = _shouldShowDriverShaderDialog
@@ -99,7 +98,6 @@ class DriverViewModel : ViewModel() {
    }

    fun onOpenDriverManager(game: Game?) {
-        activeGame = game
        if (game != null) {
            SettingsFile.loadCustomConfig(game)
        }
@@ -118,12 +116,10 @@ class DriverViewModel : ViewModel() {
        }

        if (!skipShaderWipe && newDriverPath != previousDriverPath) {
-            activeGame?.let {
-                wipeGameShaders(it)
+            wipeAllShaders()

-                if (!BooleanSetting.DONT_SHOW_DRIVER_SHADER_WARNING.getBoolean(needsGlobal = true)) {
-                    _shouldShowDriverShaderDialog.value = true
-                }
+            if (!BooleanSetting.DONT_SHOW_DRIVER_SHADER_WARNING.getBoolean(needsGlobal = true)) {
+                _shouldShowDriverShaderDialog.value = true
            }
        }

@@ -143,14 +139,12 @@ class DriverViewModel : ViewModel() {
        _shouldShowDriverShaderDialog.value = false
    }

-    private fun wipeGameShaders(game: Game) {
+    private fun wipeAllShaders() {
        viewModelScope.launch {
            withContext(Dispatchers.IO) {
-                val externalFilesDir = YuzuApplication.appContext.getExternalFilesDir(null)
-                    ?: return@withContext
                val shaderDir = File(
-                    externalFilesDir.absolutePath +
-                    "/shader/" + game.settingsName.lowercase()
+                    YuzuApplication.appContext.getExternalFilesDir(null)?.canonicalPath +
+                    "/shader/"
                )
                if (shaderDir.exists()) {
                    shaderDir.deleteRecursively()
@@ -208,7 +202,6 @@ class DriverViewModel : ViewModel() {
            }
            driversToDelete.clear()
        } finally {
-            activeGame = null
            _isDeletingDrivers.value = false
        }
    }
@@ -17,23 +17,16 @@ import android.graphics.drawable.VectorDrawable
 import android.os.Build
 import android.os.Handler
 import android.os.Looper
-import android.text.Editable
-import android.text.InputType
 import android.util.AttributeSet
 import android.view.HapticFeedbackConstants
-import android.view.KeyEvent
 import android.view.MotionEvent
 import android.view.View
 import android.view.View.OnTouchListener
 import android.view.WindowInsets
-import android.view.inputmethod.BaseInputConnection
-import android.view.inputmethod.EditorInfo
-import android.view.inputmethod.InputConnection
 import androidx.core.content.ContextCompat
 import androidx.window.layout.WindowMetricsCalculator
 import kotlin.math.max
 import kotlin.math.min
-import org.yuzu.yuzu_emu.NativeLibrary
 import org.yuzu.yuzu_emu.features.input.NativeInput
 import org.yuzu.yuzu_emu.R
 import org.yuzu.yuzu_emu.features.input.model.NativeAnalog
@@ -56,7 +49,6 @@ class InputOverlay(context: Context, attrs: AttributeSet?) :
    private val overlayButtons: MutableSet<InputOverlayDrawableButton> = HashSet()
    private val overlayDpads: MutableSet<InputOverlayDrawableDpad> = HashSet()
    private val overlayJoysticks: MutableSet<InputOverlayDrawableJoystick> = HashSet()
-    private val imeEditable = Editable.Factory.getInstance().newEditable("")

    private var inEditMode = false
    private var gamelessMode = false
@@ -83,63 +75,6 @@ class InputOverlay(context: Context, attrs: AttributeSet?) :
    // External listener for EmulationFragment joypad overlay auto-hide
    var touchEventListener: ((MotionEvent) -> Unit)? = null

-    override fun onCheckIsTextEditor(): Boolean = true
-
-    override fun onCreateInputConnection(outAttrs: EditorInfo): InputConnection {
-        imeEditable.clear()
-        outAttrs.inputType =
-            InputType.TYPE_CLASS_TEXT or
-                InputType.TYPE_TEXT_FLAG_NO_SUGGESTIONS or
-                InputType.TYPE_TEXT_VARIATION_VISIBLE_PASSWORD
-        outAttrs.imeOptions = EditorInfo.IME_FLAG_NO_EXTRACT_UI or EditorInfo.IME_ACTION_DONE
-        outAttrs.initialSelStart = 0
-        outAttrs.initialSelEnd = 0
-
-        return object : BaseInputConnection(this, true) {
-            override fun getEditable(): Editable = imeEditable
-
-            override fun commitText(text: CharSequence?, newCursorPosition: Int): Boolean {
-                if (!text.isNullOrEmpty()) {
-                    forwardCommittedText(text)
-                }
-                return super.commitText(text, newCursorPosition)
-            }
-
-            override fun deleteSurroundingText(beforeLength: Int, afterLength: Int): Boolean {
-                repeat(beforeLength.coerceAtLeast(0)) {
-                    NativeLibrary.submitInlineKeyboardInput(KeyEvent.KEYCODE_DEL)
-                }
-                return super.deleteSurroundingText(beforeLength, afterLength)
-            }
-
-            override fun sendKeyEvent(event: KeyEvent): Boolean {
-                if (event.action != KeyEvent.ACTION_DOWN) {
-                    return true
-                }
-
-                when (event.keyCode) {
-                    KeyEvent.KEYCODE_BACK,
-                    KeyEvent.KEYCODE_DEL,
-                    KeyEvent.KEYCODE_ENTER -> {
-                        NativeLibrary.submitInlineKeyboardInput(event.keyCode)
-                    }
-                    else -> {
-                        val textChar = event.unicodeChar
-                        if (textChar != 0) {
-                            NativeLibrary.submitInlineKeyboardText(textChar.toChar().toString())
-                        }
-                    }
-                }
-                return true
-            }
-
-            override fun performEditorAction(actionCode: Int): Boolean {
-                NativeLibrary.submitInlineKeyboardInput(KeyEvent.KEYCODE_ENTER)
-                return true
-            }
-        }
-    }
-
    override fun onLayout(changed: Boolean, left: Int, top: Int, right: Int, bottom: Int) {
        super.onLayout(changed, left, top, right, bottom)

@@ -184,25 +119,6 @@ class InputOverlay(context: Context, attrs: AttributeSet?) :
        }
    }

-    private fun forwardCommittedText(text: CharSequence) {
-        val builder = StringBuilder()
-        text.forEach { character ->
-            when (character) {
-                '\n' -> {
-                    if (builder.isNotEmpty()) {
-                        NativeLibrary.submitInlineKeyboardText(builder.toString())
-                        builder.clear()
-                    }
-                    NativeLibrary.submitInlineKeyboardInput(KeyEvent.KEYCODE_ENTER)
-                }
-                else -> builder.append(character)
-            }
-        }
-        if (builder.isNotEmpty()) {
-            NativeLibrary.submitInlineKeyboardText(builder.toString())
-        }
-    }
-
    private fun drawGrid(canvas: Canvas) {
        val gridSize = IntSetting.OVERLAY_GRID_SIZE.getInt()
        val width = canvas.width
@@ -175,25 +175,25 @@ class MainActivity : AppCompatActivity(), ThemeProvider {
            val latestVersion = NativeLibrary.checkForUpdate()
            if (latestVersion != null) {
                runOnUiThread {
-                    showUpdateDialog(latestVersion)
+                    val tag: String = latestVersion[0]
+                    val name: String = latestVersion[1]
+                    showUpdateDialog(tag, name)
                }
            }
        }.start()
    }

-    // TODO(crueter): body, "View on Forgejo" button
-    private fun showUpdateDialog(release: NativeLibrary.UpdateResult) {
+    private fun showUpdateDialog(tag: String, name: String) {
        MaterialAlertDialogBuilder(this)
            .setTitle(R.string.update_available)
-            .setMessage(getString(R.string.update_available_description, release.title))
+            .setMessage(getString(R.string.update_available_description, name))
            .setPositiveButton(android.R.string.ok) { _, _ ->
-                val assets = release.assets
-
-                if (assets.isEmpty()) {
-                    openLink(release.url)
-                } else {
-                    downloadAndInstallUpdate(release)
+                var artifact = tag
+                // Nightly builds have a slightly different format
+                if (NativeLibrary.isNightlyBuild()) {
+                    artifact = tag.substringAfter('.', tag)
                }
+                downloadAndInstallUpdate(tag, artifact)
            }
            .setNeutralButton(R.string.cancel) { dialog, _ ->
                dialog.dismiss()
@@ -206,23 +206,17 @@ class MainActivity : AppCompatActivity(), ThemeProvider {
            .show()
    }

-    private fun openLink(link: String) {
-        val intent = Intent(Intent.ACTION_VIEW, link.toUri())
-        startActivity(intent)
-    }
-
-    private fun downloadAndInstallUpdate(release: NativeLibrary.UpdateResult) {
+    private fun downloadAndInstallUpdate(version: String, artifact: String) {
        CoroutineScope(Dispatchers.IO).launch {
            val packageId = applicationContext.packageName
-            val asset = release.assets[0]
-            val artifact = asset.split("/").last()
+            val apkUrl = NativeLibrary.getUpdateApkUrl(version, artifact, packageId)
            val apkFile = File(cacheDir, "update-$artifact.apk")

            withContext(Dispatchers.Main) {
                showDownloadProgressDialog()
            }

-            val downloader = APKDownloader(asset, apkFile)
+            val downloader = APKDownloader(apkUrl, apkFile)
            downloader.download(
                onProgress = { progress ->
                    runOnUiThread {
@@ -254,7 +248,7 @@ class MainActivity : AppCompatActivity(), ThemeProvider {
                        } else {
                            Toast.makeText(
                                this@MainActivity,
-                                getString(R.string.update_download_failed) + "\n\nURL: $asset",
+                                getString(R.string.update_download_failed) + "\n\nURL: $apkUrl",
                                Toast.LENGTH_LONG
                            ).show()
                        }
@@ -283,7 +277,7 @@ class MainActivity : AppCompatActivity(), ThemeProvider {

    private fun updateDownloadProgress(progress: Int) {
        progressBar?.progress = progress
-        progressMessage?.text = getString(R.string.percent, progress)
+        progressMessage?.text = "$progress%"
    }

    private fun dismissDownloadProgressDialog() {
@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: 2023 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later

@@ -17,60 +14,6 @@ object InputHandler {
    var androidControllers = mapOf<Int, YuzuPhysicalDevice>()
    var registeredControllers = mutableListOf<ParamPackage>()

-    private val controllerButtons = intArrayOf(
-        KeyEvent.KEYCODE_BUTTON_A,
-        KeyEvent.KEYCODE_BUTTON_B,
-        KeyEvent.KEYCODE_BUTTON_X,
-        KeyEvent.KEYCODE_BUTTON_Y,
-        KeyEvent.KEYCODE_BUTTON_L1,
-        KeyEvent.KEYCODE_BUTTON_R1,
-        KeyEvent.KEYCODE_BUTTON_L2,
-        KeyEvent.KEYCODE_BUTTON_R2,
-        KeyEvent.KEYCODE_BUTTON_THUMBL,
-        KeyEvent.KEYCODE_BUTTON_THUMBR,
-        KeyEvent.KEYCODE_BUTTON_START,
-        KeyEvent.KEYCODE_BUTTON_SELECT,
-        KeyEvent.KEYCODE_DPAD_UP,
-        KeyEvent.KEYCODE_DPAD_DOWN,
-        KeyEvent.KEYCODE_DPAD_LEFT,
-        KeyEvent.KEYCODE_DPAD_RIGHT
-    )
-
-    private val controllerAxes = intArrayOf(
-        MotionEvent.AXIS_X,
-        MotionEvent.AXIS_Y,
-        MotionEvent.AXIS_Z,
-        MotionEvent.AXIS_RX,
-        MotionEvent.AXIS_RY,
-        MotionEvent.AXIS_RZ,
-        MotionEvent.AXIS_HAT_X,
-        MotionEvent.AXIS_HAT_Y,
-        MotionEvent.AXIS_LTRIGGER,
-        MotionEvent.AXIS_RTRIGGER
-    )
-
-    fun isPhysicalGameController(device: InputDevice?): Boolean {
-        device ?: return false
-
-        if (device.isVirtual) {
-            return false
-        }
-
-        val sources = device.sources
-        val hasControllerSource =
-            sources and InputDevice.SOURCE_GAMEPAD == InputDevice.SOURCE_GAMEPAD ||
-                sources and InputDevice.SOURCE_JOYSTICK == InputDevice.SOURCE_JOYSTICK
-        if (!hasControllerSource) {
-            return false
-        }
-
-        val hasControllerButtons = device.hasKeys(*controllerButtons).any { it }
-        val hasControllerAxes = device.motionRanges.any { range ->
-            controllerAxes.contains(range.axis)
-        }
-        return hasControllerButtons || hasControllerAxes
-    }
-
    fun dispatchKeyEvent(event: KeyEvent): Boolean {
        val action = when (event.action) {
            KeyEvent.ACTION_DOWN -> NativeInput.ButtonState.PRESSED
@@ -114,7 +57,10 @@ object InputHandler {
        val inputSettings = NativeConfig.getInputSettings(true)
        deviceIds.forEach { deviceId ->
            InputDevice.getDevice(deviceId)?.apply {
-                if (isPhysicalGameController(this)) {
+                // Verify that the device has gamepad buttons, control sticks, or both.
+                if (sources and InputDevice.SOURCE_GAMEPAD == InputDevice.SOURCE_GAMEPAD ||
+                    sources and InputDevice.SOURCE_JOYSTICK == InputDevice.SOURCE_JOYSTICK
+                ) {
                    if (!gameControllerDeviceIds.contains(controllerNumber)) {
                        gameControllerDeviceIds[controllerNumber] = YuzuPhysicalDevice(
                            this,
@@ -95,7 +95,7 @@ namespace AndroidSettings {
        Settings::Setting<u32> input_overlay_auto_hide{linkage, 5, "input_overlay_auto_hide",
                                                    Settings::Category::Overlay,
                                                    Settings::Specialization::Default, true, true, &enable_input_overlay_auto_hide};
-        Settings::Setting<bool> hide_overlay_on_controller_input{linkage, true,
+        Settings::Setting<bool> hide_overlay_on_controller_input{linkage, false,
                                                              "hide_overlay_on_controller_input",
                                                              Settings::Category::Overlay,
                                                              Settings::Specialization::Default, true,
@@ -147,13 +147,6 @@ namespace AndroidSettings {
                                                      &show_performance_overlay};


-        Settings::Setting<s32> pipeline_worker_count{linkage, 4, "pipeline_worker_count",
-                                 Settings::Category::Android,
-                                 Settings::Specialization::Default,
-                                 true,
-                                 true};
-
-
        Settings::Setting<bool> show_input_overlay{linkage, true, "show_input_overlay",
                                                   Settings::Category::Overlay};
        Settings::Setting<bool> overlay_snap_to_grid{linkage, false, "overlay_snap_to_grid",
@@ -1699,76 +1699,78 @@ JNIEXPORT jboolean JNICALL Java_org_yuzu_yuzu_1emu_NativeLibrary_isNightlyBuild(
 #ifdef ENABLE_UPDATE_CHECKER


-JNIEXPORT jobject JNICALL Java_org_yuzu_yuzu_1emu_NativeLibrary_checkForUpdate(
+JNIEXPORT jobjectArray JNICALL Java_org_yuzu_yuzu_1emu_NativeLibrary_checkForUpdate(
        JNIEnv* env,
        jobject obj) {
-    std::optional<Common::Net::Release> release = UpdateChecker::GetUpdate();
+    std::optional<UpdateChecker::Update> release = UpdateChecker::GetUpdate();
    if (!release) return nullptr;

    const std::string tag = release->tag;
-    const std::string title = release->title;
-    const std::string body = release->body;
-    const std::string url = release->html_url;
+    const std::string name = release->name;

-    // Android *should* only ever define a single asset.
-    // If not, something has gone wrong, but the Kotlin side can handle it.
-    const auto assets = release->GetPlatformAssets();
+    jobjectArray result = env->NewObjectArray(2, env->FindClass("java/lang/String"), nullptr);

-    jclass updateResultClass = env->FindClass("org/yuzu/yuzu_emu/NativeLibrary$UpdateResult");
-    if (!updateResultClass) {
-        LOG_ERROR(Frontend, "Could not find UpdateResult class");
-        return nullptr;
-    }
-
-    jmethodID updateResultCtor = env->GetMethodID(updateResultClass, "<init>", "()V");
-
-    if (!updateResultCtor) {
-        LOG_ERROR(Frontend, "Could not find UpdateResult ctor");
-        env->DeleteLocalRef(updateResultClass);
-        return nullptr;
-    }
-
-    jmethodID setTag = env->GetMethodID(updateResultClass, "setTag", "(Ljava/lang/String;)V");
-    jmethodID setTitle = env->GetMethodID(updateResultClass, "setTitle", "(Ljava/lang/String;)V");
-    jmethodID setBody = env->GetMethodID(updateResultClass, "setBody", "(Ljava/lang/String;)V");
-    jmethodID setUrl = env->GetMethodID(updateResultClass, "setUrl", "(Ljava/lang/String;)V");
-    jmethodID addAsset = env->GetMethodID(updateResultClass, "addAsset", "(Ljava/lang/String;)V");
-
-    jobject updateResult = env->NewObject(updateResultClass, updateResultCtor);
-
-    LOG_DEBUG(Frontend, "Tag: {}", tag);
-    LOG_DEBUG(Frontend, "Title: {}", title);
-    LOG_DEBUG(Frontend, "Body: {}", body);
-    LOG_DEBUG(Frontend, "Url: {}", url);
-
-    const auto jtag = env->NewStringUTF(tag.c_str());
-    const auto jtitle = env->NewStringUTF(title.c_str());
-    const auto jbody = env->NewStringUTF(body.c_str());
-    const auto jurl = env->NewStringUTF(url.c_str());
-
-    env->CallVoidMethod(updateResult, setTag, jtag);
-    env->CallVoidMethod(updateResult, setTitle, jtitle);
-    env->CallVoidMethod(updateResult, setBody, jbody);
-    env->CallVoidMethod(updateResult, setUrl, jurl);
-
-    // TODO(crueter): Handling for multiple assets?
-    // Maybe another data class x(
-    for (const Common::Net::Asset &a : assets) {
-        const auto jaurl = env->NewStringUTF(a.path.c_str());
-        env->CallVoidMethod(updateResult, addAsset, jaurl);
-        env->DeleteLocalRef(jaurl);
-    }
+    const jstring jtag = env->NewStringUTF(tag.c_str());
+    const jstring jname = env->NewStringUTF(name.c_str());

+    env->SetObjectArrayElement(result, 0, jtag);
+    env->SetObjectArrayElement(result, 1, jname);
    env->DeleteLocalRef(jtag);
-    env->DeleteLocalRef(jtitle);
-    env->DeleteLocalRef(jbody);
-    env->DeleteLocalRef(jurl);
+    env->DeleteLocalRef(jname);

-    env->DeleteLocalRef(updateResultClass);
-
-    return updateResult;
+    return result;
 }

+JNIEXPORT jstring JNICALL Java_org_yuzu_yuzu_1emu_NativeLibrary_getUpdateUrl(
+        JNIEnv* env,
+        jobject obj,
+        jstring version) {
+    const char* version_str = env->GetStringUTFChars(version, nullptr);
+    const std::string url = fmt::format("{}/{}/releases/tag/{}",
+        std::string{Common::g_build_auto_update_website},
+        std::string{Common::g_build_auto_update_repo},
+        version_str);
+    env->ReleaseStringUTFChars(version, version_str);
+    return env->NewStringUTF(url.c_str());
+}
+
+JNIEXPORT jstring JNICALL Java_org_yuzu_yuzu_1emu_NativeLibrary_getUpdateApkUrl(
+        JNIEnv* env,
+        jobject obj,
+        jstring tag,
+        jstring artifact,
+        jstring packageId) {
+    const char* version_str = env->GetStringUTFChars(tag, nullptr);
+    const char* artifact_str = env->GetStringUTFChars(artifact, nullptr);
+    const char* package_id_str = env->GetStringUTFChars(packageId, nullptr);
+
+    std::string variant;
+    std::string package_id(package_id_str);
+
+    if (package_id.find("dev.legacy.eden_emulator") != std::string::npos) {
+        variant = "legacy";
+    } else if (package_id.find("com.miHoYo.Yuanshen") != std::string::npos) {
+        variant = "optimized";
+    } else {
+#ifdef ARCHITECTURE_arm64
+        variant = "standard";
+#else
+        variant = "chromeos";
+#endif
+    }
+
+    const std::string apk_filename = fmt::format("Eden-Android-{}-{}.apk", artifact_str, variant);
+    const std::string url = fmt::format("{}/{}/releases/download/{}/{}",
+        std::string{Common::g_build_auto_update_website},
+        std::string{Common::g_build_auto_update_repo},
+        version_str,
+        apk_filename);
+
+    env->ReleaseStringUTFChars(tag, version_str);
+    env->ReleaseStringUTFChars(artifact, artifact_str);
+    env->ReleaseStringUTFChars(packageId, package_id_str);
+    return env->NewStringUTF(url.c_str());
+}
 #endif

 JNIEXPORT jstring JNICALL Java_org_yuzu_yuzu_1emu_NativeLibrary_getBuildVersion(
@@ -32,7 +32,7 @@
    <string name="hide_overlay_on_controller_input">إخفاء الطبقة عند إدخال ذراع التحكم</string>
    <string name="hide_overlay_on_controller_input_description">إخفاء تلقائي لطبقة عناصر التحكم باللمس عند استخدام ذراع تحكم فعلية. تظهر الطبقة مرة أخرى عند فصل ذراع التحكم.</string>
    <string name="invert_confirm_back_controller_buttons">عكس أزرار التأكيد/الرجوع في وحدة التحكم</string>
-    <string name="invert_confirm_back_controller_buttons_description">تبديل طريقة التعامل مع زري «تأكيد» و«رجوع» في نظام Android لتتوافق مع أنماط أجهزة Switch وXbox أثناء استخدام واجهة المستخدم الخاصة بالتطبيق.</string>
+    <string name="invert_confirm_back_controller_buttons_description">قم بتبديل طريقة عمل زري التأكيد والرجوع في نظام Android لتتوافق مع أنماط Switch و Xbox أثناء استخدام واجهة المستخدم الخاصة بالتطبيق.</string>

    <string name="input_overlay_options">طبقة الإدخال</string>
    <string name="input_overlay_options_description">ضبط ذراع التحكم على الشاشة</string>
@@ -268,7 +268,7 @@
    <string name="product">المنتج</string>
    <string name="android_version">إصدار Android</string>
    <string name="android_security_patch">تصحيح الأمان</string>
-    <string name="build_id">معرف الإصدار</string>
+    <string name="build_id">معرف البناء</string>
    <string name="general_information">معلومات عامة</string>
    <string name="hardware">الأجهزة</string>
    <string name="supported_abis">واجهات برمجة التطبيقات المدعومة</string>
@@ -287,7 +287,7 @@
    <string name="install_amiibo_keys">تثبيت مفاتيح أميبو</string>
    <string name="install_amiibo_keys_description">مطلوب لاستخدام أميبو في اللعبة</string>
    <string name="gpu_driver_fetcher">أداة جلب برامج تشغيل وحدة المعالجة الرسومية</string>
-    <string name="gpu_driver_manager">إدارة برامج تشغيل وحدة معالجة الرسومات</string>
+    <string name="gpu_driver_manager">مدير برامج تشغيل وحدة معالجة الرسومات</string>
    <string name="install_gpu_driver_description">تثبيت برامج تشغيل بديلة لأداء أو دقة أفضل</string>
    <string name="advanced_settings">الإعدادات المتقدمة</string>
    <string name="settings_description">ضبط إعدادات المحاكي</string>
@@ -403,7 +403,7 @@
    <string name="contributors">المساهمين</string>
    <string name="contributors_description">الأشخاص الذين جعلوا تطبيق Eden لنظام Android ممكنًا</string>
    <string name="licenses_description">المشاريع التي تجعل Eden لأجهزة Android ممكنة</string>
-    <string name="build">الإصدار</string>
+    <string name="build">البناء</string>
    <string name="user_data">بيانات المستخدم</string>
    <string name="user_data_description">استيراد/تصدير جميع بيانات التطبيق.\nعند استيراد بيانات المستخدم، سيتم حذف جميع بيانات المستخدم الموجودة!\nقد يُسبب استيراد البيانات من Citron بعض المشاكل. يُنصح باستيراد جميع البيانات المطلوبة يدويًا.</string>
    <string name="exporting_user_data">جارٍ تصدير بيانات المستخدم...</string>
@@ -463,6 +463,8 @@
    <string name="fsr_sharpness">حدة FSR</string>
    <string name="fsr_sharpness_description">يحدد مدى وضوح الصورة عند استخدام التباين الديناميكي لـ FSR</string>
    <string name="renderer_anti_aliasing">طريقة مضاد التعرج</string>
+    <string name="renderer_optimize_spirv_output">تحسين مخرجات SPIRV</string>
+    <string name="renderer_optimize_spirv_output_description">يعمل على تحسين أداء برامج التظليل المجمعة لتحسين كفاءة وحدة معالجة الرسومات، ولكنه قد يؤدي إلى زيادة وقت التحميل وإبطاء السرعة في البداية.</string>


    <string name="advanced">متقدم</string>
@@ -477,6 +479,8 @@
    <string name="vram_usage_mode_description">تحكم في مدى قوة تخصيص المحاكي لذاكرة وحدة معالجة الرسومات وتحريرها.</string>
    <string name="accelerate_astc">طريقة فك ضغط ASTC</string>
    <string name="accelerate_astc_description">حدد كيفية فك ضغط نسيج ASTC للعرض: CPU (بطيء، آمن)، GPU (سريع، موصى به)، أو CPU Async (بدون توقف، قد يسبب مشاكل)</string>
+    <string name="astc_recompression">طريقة إعادة ضغط ASTC</string>
+    <string name="astc_recompression_description">حدد كيفية إعادة ضغط نسيج ASTC لتحسين التوافق والأداء. تمكين هذا الخيار يوفر VRAM ولكن قد يقلل من جودة النسيج.</string>

    <string name="sync_memory_operations">مزامنة عمليات الذاكرة</string>
    <string name="sync_memory_operations_description">يضمن اتساق البيانات بين عمليات الحوسبة والذاكرة. هذا الخيار قد يحل المشكلات في بعض الألعاب، ولكن قد يقلل الأداء في بعض الحالات. يبدو أن الألعاب التي تستخدم Unreal Engine 4 هي الأكثر تأثرًا.</string>
@@ -484,16 +488,12 @@
    <string name="use_disk_shader_cache_description">يقلل من التأتأة عن طريق تخزين وتحميل التظليلات التي تم إنشاؤها محليًا.</string>
    <string name="renderer_force_max_clock">إجبار السرعة القصوى (لأجهزة Adreno فقط)</string>
    <string name="renderer_force_max_clock_description">يجبر وحدة معالجة الرسومات على العمل بأقصى سرعة ممكنة (سيظل يتم تطبيق القيود الحرارية).</string>
-    <string name="renderer_asynchronous_gpu_emulation">محاكاة غير متزامنة لوحدة معالجة الرسومات</string>
-    <string name="renderer_asynchronous_gpu_emulation_description">يُشغّل هذا الخيار محاكاة وحدة معالجة الرسومات بشكل غير متزامن لتقليل توقف وحدة المعالجة المركزية وتحسين الإنتاجية. عطّل هذا الخيار فقط في حال واجهت مشاكل متعلقة بالتوقيت.</string>
-    <string name="renderer_async_presentation">عرض غير متزامن</string>
-    <string name="renderer_async_presentation_description">يحسّن الأداء بشكل طفيف عن طريق نقل عملية العرض إلى خيط معالجة منفصل لوحدة المعالجة المركزية.</string>
    <string name="renderer_reactive_flushing">استخدم التنظيف التفاعلي</string>
    <string name="renderer_reactive_flushing_description">يحسن دقة العرض في بعض الألعاب على حساب الأداء.</string>
    <string name="enable_buffer_history">تمكين سجل التخزين المؤقت</string>
    <string name="enable_buffer_history_description">يُتيح هذا الخيار الوصول إلى حالات التخزين المؤقت السابقة. وقد يُحسّن جودة العرض وثبات الأداء في بعض الألعاب.</string>
    <string name="use_optimized_vertex_buffers">مخازن الرؤوس المُحسّنة</string>
-    <string name="use_optimized_vertex_buffers_description">يتيح ربط مخزن الرؤوس المُحسّن لتحسين الأداء. يتطلب برامج تشغيل Turnip/QCOM من إصدار Mesa 26.0 أو أحدث. سيؤدي إلى تعطل النظام عند استخدام برامج تشغيل Turnip الأقدم.</string>
+    <string name="use_optimized_vertex_buffers_description">يُتيح ربطًا مُحسَّنًا لمخازن الرؤوس لتحسين الأداء. يتطلب برامج تشغيل Turnip من Mesa 26.0 أو أحدث. قد يتعطل على برامج التشغيل الأقدم.</string>

    <string name="hacks">اختراقات</string>

@@ -502,9 +502,7 @@
    <string name="skip_cpu_inner_invalidation">تخطي إبطال صلاحية وحدة المعالجة المركزية الداخلية</string>
    <string name="skip_cpu_inner_invalidation_description">يتخطى بعض عمليات إبطال ذاكرة التخزين المؤقتة من جانب وحدة المعالجة المركزية أثناء تحديثات الذاكرة، مما يقلل من استخدام وحدة المعالجة المركزية ويحسن أداءها. قد يتسبب ذلك في حدوث أعطال أو تعطل في بعض الألعاب.</string>
    <string name="fix_bloom_effects">إصلاح تأثيرات التوهج</string>
-    <string name="fix_bloom_effects_description">يقلل من ضبابية التوهج في LA/EOW  (Adreno A6XX - A7XX/ Turnip)، ويزيل التوهج في Burnout. تحذير: قد يسبب تشوهات رسومية في ألعاب أخرى.</string>
-    <string name="emulate_bgr565">محاكاة BGR565</string>
-    <string name="emulate_bgr565_description">يُصلح مشاكل انعكاس الألوان في الألعاب أو ظهور تشوهات غريبة أو ظلال غريبة.</string>
+    <string name="fix_bloom_effects_description">يقلل من ضبابية التوهج في LA/EOW (Adreno 700)، ويزيل التوهج في Burnout. تحذير: قد يسبب ظهور خلل رسومي في ألعاب أخرى.</string>
    <string name="renderer_asynchronous_shaders">استخدم تظليل غير متزامن</string>
    <string name="renderer_asynchronous_shaders_description">يقوم بتجميع التظليل بشكل غير متزامن. قد يقلل ذلك من التقطعات ولكنه قد يؤدي أيضًا إلى حدوث أخطاء.</string>
    <string name="gpu_unswizzle_settings">إعدادات إلغاء ترتيب بيانات وحدة معالجة الرسومات</string>
@@ -527,6 +525,10 @@
    <string name="disabled">معطل</string>
    <string name="vertex_input_dynamic_state">حالة ديناميكية لإدخال الرأس</string>
    <string name="vertex_input_dynamic_state_description">يتيح ميزة الحالة الديناميكية لإدخال الرأس لتحسين الجودة والأداء.</string>
+    <string name="provoking_vertex">الرأس المثير</string>
+    <string name="provoking_vertex_description">يحسن الإضاءة ومعالجة الرؤوس في بعض الألعاب. مدعوم فقط على وحدات معالجة الرسومات Vulkan 1.0+.</string>
+    <string name="descriptor_indexing">فهرسة الوصف</string>
+    <string name="descriptor_indexing_description">يحسن معالجة النسيج والمخزن المؤقت، بالإضافة إلى طبقة الترجمة Maxwell. مدعوم من بعض وحدات معالجة الرسومات Vulkan 1.1 وجميع وحدات معالجة الرسومات Vulkan 1.2+.</string>
    <string name="sample_shading_fraction">تظليل العينة</string>
    <string name="sample_shading_fraction_description">يسمح هذا الخيار بتنفيذ مُظلل الأجزاء لكل عينة في جزء متعدد العينات بدلاً من تنفيذه مرة واحدة لكل جزء. يُحسّن هذا من جودة الرسومات على حساب بعض الأداء.</string>

@@ -631,10 +633,10 @@
    <string name="gamecube_controller">ذراع تحكم GameCube</string>
    <string name="invert_axis">عكس المحور</string>
    <string name="invert_button">عكس الزر</string>
-    <string name="toggle_button">زر تشغيل/إيقاف</string>
+    <string name="toggle_button">زر التبديل</string>
    <string name="turbo_button">زر التوربو</string>
    <string name="set_threshold">تعيين الحد الفاصل</string>
-    <string name="toggle_axis">تشغيل/إيقاف المحور</string>
+    <string name="toggle_axis">تبديل المحور</string>
    <string name="connected">متصل</string>
    <string name="use_system_vibrator">استخدم هزاز النظام</string>
    <string name="input_overlay">طبقة الإدخال</string>
@@ -660,7 +662,7 @@

    <!-- Miscellaneous -->
    <string name="slider_default">افتراضي</string>
-    <string name="default_string">افتراضي</string>
+    <string name="default_string">الافتراضي</string>
    <string name="loading">جارٍ التحميل…</string>
    <string name="shutting_down">جارٍ إيقاف التشغيل...</string>
    <string name="reset_setting_confirmation">هل تريد إعادة تعيين هذا الإعداد إلى قيمته الافتراضية؟</string>
@@ -686,8 +688,8 @@
    <string name="import_success">تم الاستيراد بنجاح</string>
    <string name="export_success">تم التصدير بنجاح</string>
    <string name="start">بدء</string>
-    <string name="global">الإعدادات العامة</string>
-    <string name="custom">الإعدادات المخصصة للعبة</string>
+    <string name="global">المتغيرات العامة</string>
+    <string name="custom">مخصص</string>
    <string name="import_complete">اكتمل الاستيراد</string>
    <string name="use_global_setting">استخدام الإعداد العام</string>
    <string name="operation_completed_successfully">اكتملت العملية بنجاح</string>
@@ -766,7 +768,7 @@
    <string name="info_description">معرف العنوان، المطور، الإصدار</string>
    <string name="per_game_settings">الإعدادات الخاصة للعبة</string>
    <string name="per_game_settings_description">تعديل الإعدادات الخاصة بهذه اللعبة</string>
-    <string name="launch_options">إعدادات التشغيل</string>
+    <string name="launch_options">تشغيل الإعدادات</string>
    <string name="path">المسار</string>
    <string name="program_id">معرف العنوان</string>
    <string name="developer">المطور</string>
@@ -878,13 +880,13 @@
    <!-- Emulation Menu -->
    <string name="emulation_exit">خروج من المحاكاة</string>
    <string name="emulation_done">إنهاء</string>
-    <string name="emulation_toggle_controls">تشغيل/إيقاف أزرار التحكم</string>
+    <string name="emulation_toggle_controls">تبديل أزرار التحكم</string>
    <string name="emulation_rel_stick_center">مركز العصا النسبي</string>
    <string name="emulation_dpad_slide">انزلاق الأسهم</string>
    <string name="emulation_haptics">الاهتزازات الديناميكية</string>
    <string name="emulation_show_overlay">عرض ذراع التحكم</string>
    <string name="emulation_hide_overlay">إخفاء ذراع التحكم</string>
-    <string name="emulation_toggle_all">تشغيل/إيقاف الكل</string>
+    <string name="emulation_toggle_all">تبديل الكل</string>
    <string name="emulation_control_adjust">ضبط الطبقة</string>
    <string name="emulation_control_scale">الحجم</string>
    <string name="emulation_control_opacity">الشفافية</string>
@@ -995,6 +997,9 @@
    <string name="dma_accuracy_unsafe">غير آمن</string>
    <string name="dma_accuracy_safe">آمن</string>

+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">غير مضغوط</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">محافظ</string>
    <string name="vram_usage_aggressive">عدواني</string>

@@ -1061,8 +1066,6 @@
    <string name="theme_material_you">ألوان ديناميكية</string>
    <string name="app_settings">إعدادات التطبيق</string>
    <string name="theme_and_color">السمة واللون</string>
-    <string name="fullscreen_mode">وضع ملء الشاشة</string>
-    <string name="fullscreen_mode_description">إخفاء أشرطة نظام Android عبر شاشات التطبيق. اسحب من أحد الحواف لإظهارها مؤقتًا.</string>

    <!-- Theme Modes -->
    <string name="change_theme_mode">تغيير وضع السمة</string>
@@ -1093,7 +1096,7 @@
    <string name="blue">أزرق</string>
    <string name="cyan">سماوي</string>
    <string name="red">أحمر</string>
-    <string name="green">أخضر</string>
+    <string name="green">أخضر (افتراضي)</string>
    <string name="yellow">أصفر</string>
    <string name="orange">برتقالي</string>
    <string name="pink">وردي</string>
@@ -1126,7 +1129,7 @@
    <string name="enable_overlay_description">تمكين التطبيق الصغير المدمج في Horizon. اضغط مع الاستمرار على زر الشاشة الرئيسية لمدة 1 ثانية لإظهاره.</string>

    <!-- Profile Management -->
-    <string name="profile_manager">إدارة ملف التعريف</string>
+    <string name="profile_manager">مدير الملف الشخصي</string>
    <string name="profile_manager_description">إدارة ملفات تعريف المستخدمين</string>
    <string name="profile_add_user">إضافة مستخدم</string>
    <string name="profile_new_user">مستخدم جديد</string>
@@ -1159,6 +1162,5 @@
    <string name="license_fidelityfx_fsr_description">تحسين الجودة بدرجة عالية من AMD</string>
    <string name="external_content">محتوى خارجي</string>
    <string name="add_folders">إضافة مجلد</string>
-    <string name="percent">%1$d%%</string>

 </resources>
@@ -332,6 +332,7 @@
    <string name="fsr_sharpness">تیژی FSR</string>
    <string name="fsr_sharpness_description">دیاریکردنی تیژی وێنە لە کاتی بەکارهێنانی FSR</string>
    <string name="renderer_anti_aliasing">شێوازی دژە-خاوڕۆیی</string>
+    <string name="renderer_optimize_spirv_output_description">شێیدەرە کۆمپایلکراوەکان باش دەکات بۆ باشترکردنی کارایی GPU.</string>


    <string name="dma_accuracy">وردیی DMA</string>
@@ -342,6 +343,8 @@
    <string name="vram_usage_mode_description">کۆنتڕۆڵی بەکارهێنانی VRAM</string>
    <string name="accelerate_astc">ڕێگای دیکۆدکردنی ASTC</string>
    <string name="accelerate_astc_description">هەڵبژێرە چۆن تێکستوورە پەستووکراوەکانی ASTC دەکرێنەوە بۆ ڕێندرکردن: CPU (هێواش، سەلامەت)، GPU (خێرا، پێشنیارکراو)، یان CPU Async (بێ ستەتەر، لەوانەیە کێشە دروست بکات)</string>
+    <string name="astc_recompression">ڕێگای پێکهێنانەوەی ASTC</string>
+    <string name="astc_recompression_description">هەڵبژێرە چۆن تێکستوورەکانی ASTC پەستوو دەکرێنەوە بۆ باشترکردنی گونجاندن و کارایی. چالاککردنی ئەم هەڵبژاردە VRAM هەڵدەگرێت بەڵام لەوانەیە کەمکردنەوەی کوالێتی تێکستوور بکات.</string>

    <string name="sync_memory_operations">هاوبەشیی کردارەکانی بیرگە</string>
    <string name="sync_memory_operations_description">دڵنیایی داتا لە نێوان کردارەکانی کۆمپیوتەر و بیرگە. ئەم هەڵبژاردە کێشەکان لە هەندێک یاری چارەسەر دەکات، بەڵام لە هەندێک حاڵەت کارایی کەم دەکاتەوە. وا دیارە یارییەکانی Unreal Engine 4 زۆرترین کاریگەریان هەیە.</string>
@@ -357,6 +360,10 @@
    <string name="renderer_asynchronous_shaders_description">کۆمپایلکردنی شادەرەکان بەشێوەی ناڕێک. ئەمە ڕەنگە کەمکردنەوەی ستەتەر بکات بەڵام لەوانەیە هەڵەش دروست بکات.</string>
    <string name="dyna_state">الحالة الديناميكية الممتدة</string>
    <string name="disabled">ناچالاک</string>
+    <string name="provoking_vertex">الرأس المثير</string>
+    <string name="provoking_vertex_description">يحسن الإضاءة ومعالجة الرؤوس في بعض الألعاب. مدعوم فقط على وحدات معالجة الرسومات التي تدعم فولكان 1.0+.</string>
+    <string name="descriptor_indexing">فهرسة الواصفات</string>
+    <string name="descriptor_indexing_description">يحسن معالجة القوام والمخازن المؤقتة، بالإضافة إلى طبقة ترجمة ماكسويل. مدعوم من قبل بعض وحدات معالجة الرسومات التي تدعم فولكان 1.1 وجميع وحدات معالجة الرسومات التي تدعم فولكان 1.2+.</string>
    <string name="display">پیشاندان</string>

    <string name="renderer_screen_layout">ڕێکخستنی شاشە</string>
@@ -570,6 +577,9 @@

    <!-- DMA Accuracy -->
    <string name="dma_accuracy_default">بنەڕەتی</string>
+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">پێکهێنەنەوە</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">پارێزەر</string>
    <string name="vram_usage_aggressive">توند</string>

@@ -442,6 +442,8 @@
    <string name="fsr_sharpness">Ostrost FSR</string>
    <string name="fsr_sharpness_description">Určuje jak ostře bude obraz vypadat při použití dynamického kontrastu FSR.</string>
    <string name="renderer_anti_aliasing">Metoda anti-aliasingu</string>
+    <string name="renderer_optimize_spirv_output">Optimalizovat výstup SPIRV</string>
+    <string name="renderer_optimize_spirv_output_description">Optimalizuje kompilované shadery pro zlepšení efektivity GPU, ale mohou se objevit delší nahrávací časy a zpomalení v úvodu.</string>


    <string name="advanced">Pokročilé</string>
@@ -456,6 +458,8 @@
    <string name="vram_usage_mode_description">Určuje, jak moc agresivně emulátor přiděluje a uvolňuje grafickou paměť.</string>
    <string name="accelerate_astc">Metoda dekódování ASTC</string>
    <string name="accelerate_astc_description">Vyberte způsob jak se dekódují ASTC textury: CPU (pomalé, bezpečné), GPU (rychlé, doporučené) nebo CPU Async (asynchronní, žádné zasekávání, ale může způsobit problémy)</string>
+    <string name="astc_recompression">Metoda rekomprese ASTC</string>
+    <string name="astc_recompression_description">Vyberte způsob rekomprese textur ASTC pro zlepšení kompatibility a výkonu. Zapnutí této volby ušetří VRAM, ale může snížit kvalitu textur.</string>

    <string name="sync_memory_operations">Synchronizace paměťových operací</string>
    <string name="sync_memory_operations_description">Zajišťuje konzistenci dat mezi výpočetními a paměťovými operacemi. Tato volba by měla opravit problémy v některých hrách, ale může v některých případech snížit výkon. Největší změny se týkají her založených na Unreal Engine 4.</string>
@@ -482,6 +486,10 @@
    <string name="disabled">Vypnuto</string>
    <string name="vertex_input_dynamic_state">Dynamický stav vstupu vrcholů (Vertex Input)</string>
    <string name="vertex_input_dynamic_state_description">Aktivuje funkci dynamického stavu vstupu vrcholů (Vertex Input Dynamic State) pro lepší kvalitu a výkon.</string>
+    <string name="provoking_vertex">Určující vrchol</string>
+    <string name="provoking_vertex_description">Zlepšuje osvětlení a zpracování vrcholů v některých hrách. Podporováno pouze na GPU s API Vulkan 1.0+.</string>
+    <string name="descriptor_indexing">Indexování deskriptorů</string>
+    <string name="descriptor_indexing_description">Zlepšuje zpracování textur a bufferů, stejně jako překladovou vrstvu architektury Maxwell. Podporováno některými GPU s API Vulkan 1.1 a všemi GPU s API Vulkan 1.2+.</string>
    <string name="display">Zobrazení</string>

    <string name="renderer_screen_layout">Orientace</string>
@@ -719,6 +727,9 @@
    <string name="dma_accuracy_unsafe">Nebezpečné</string>
    <string name="dma_accuracy_safe">Bezpečné</string>

+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">Nekomprimované</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">Konzervativní</string>
    <string name="vram_usage_aggressive">Agresivní</string>

@@ -442,6 +442,8 @@ Wird der Handheld-Modus verwendet, verringert es die Auflösung und erhöht die
    <string name="fsr_sharpness">FSR-Schärfe</string>
    <string name="fsr_sharpness_description">Bestimmt die Schärfe bei FSR-Nutzung.</string>
    <string name="renderer_anti_aliasing">Kantenglättung</string>
+    <string name="renderer_optimize_spirv_output">Optimiere SPIRV-Ausgabe</string>
+    <string name="renderer_optimize_spirv_output_description">Optimiert den kompilierten Shader, um die GPU-Effizienz zu verbessern.</string>


    <string name="advanced">Erweitert</string>
@@ -456,6 +458,8 @@ Wird der Handheld-Modus verwendet, verringert es die Auflösung und erhöht die
    <string name="vram_usage_mode_description">Steuerung der GPU-Speicherzuweisung</string>
    <string name="accelerate_astc">ASTC-Decodierung</string>
    <string name="accelerate_astc_description">Wählen Sie aus, wie ASTC-komprimierte Texturen für das Rendering decodiert werden: CPU (langsam, sicher), GPU (schnell, empfohlen) oder CPU Async (kein Ruckeln, kann Probleme verursachen)</string>
+    <string name="astc_recompression">ASTC-Neukompression</string>
+    <string name="astc_recompression_description">Wählen Sie, wie ASTC-Texturen neu komprimiert werden, um die Kompatibilität und Leistung zu verbessern. Diese Option spart VRAM, kann aber die Texturqualität verringern.</string>

    <string name="sync_memory_operations">Speicheroperationen synchronisieren</string>
    <string name="sync_memory_operations_description">Stellt die Datenkonsistenz zwischen Compute- und Speicheroperationen sicher. Diese Option sollte Probleme in einigen Spielen beheben, kann aber in einigen Fällen die Leistung verringern. Spiele mit Unreal Engine 4 scheinen am stärksten betroffen zu sein.</string>
@@ -480,6 +484,10 @@ Wird der Handheld-Modus verwendet, verringert es die Auflösung und erhöht die
    <string name="disabled">Deaktiviert</string>
    <string name="vertex_input_dynamic_state">Vertex Input Dynamic State</string>
    <string name="vertex_input_dynamic_state_description">Aktiviert die Funktion \"Vertex Input Dynamic State\" für bessere Qualität und Leistung.</string>
+    <string name="provoking_vertex">Provokanter Vertex</string>
+    <string name="provoking_vertex_description">Verbessert die Beleuchtung und die Vertex-Verarbeitung in einigen Spielen. Wird nur von GPUs mit Vulkan 1.0+ unterstützt.</string>
+    <string name="descriptor_indexing">Deskriptor-Indizierung</string>
+    <string name="descriptor_indexing_description">Verbessert die Textur- und Puffer-Verarbeitung sowie die Maxwell-Übersetzungsschicht. Wird von einigen Vulkan 1.1-GPUs und allen Vulkan 1.2+-GPUs unterstützt.</string>
    <string name="sample_shading_fraction">Sample Shading</string>
    <string name="sample_shading_fraction_description">Ermöglicht es dem Fragment-Shader, in einem Multisample-Fragment pro Sample anstatt einmal pro Fragment ausgeführt zu werden. Verbessert die Grafikqualität auf Kosten der Leistung.</string>

@@ -927,6 +935,9 @@ Wirklich fortfahren?</string>
    <string name="dma_accuracy_unsafe">Unsicher</string>
    <string name="dma_accuracy_safe">Sicher</string>

+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">Unkomprimiert</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">Konservativ</string>
    <string name="vram_usage_aggressive">Aggressiv</string>

@@ -993,6 +1004,7 @@ Wirklich fortfahren?</string>
    <string name="theme_material_you">Material You</string>
    <string name="app_settings">App-Einstellungen</string>
    <string name="theme_and_color">Theme und Farben</string>
+
    <!-- Theme Modes -->
    <string name="change_theme_mode">Design</string>
    <string name="theme_mode_follow_system">System folgen</string>
@@ -302,7 +302,7 @@
    <string name="manage_save_data">Administrar datos de guardado</string>
    <string name="manage_save_data_description">Guardar los datos encontrados. Por favor, seleccione una opción de abajo.</string>
    <string name="import_save_warning">Importar datos de guardado</string>
-    <string name="import_save_warning_description">Esto sobreescribirá todos los datos de guardado existentes con el archivo proporcionado. ¿Está seguro de querer continuar\?</string>
+    <string name="import_save_warning_description">Ésto sobreescribirá todos los datos de guardado existentes con el archivo proporcionado. ¿Está seguro de querer continuar?</string>
    <string name="save_files_importing">Importando archivos de guardado...</string>
    <string name="save_files_exporting">Exportando archivos de guardado...</string>
    <string name="save_file_imported_success">Importado correctamente</string>
@@ -333,8 +333,8 @@
    <string name="install_game_content_help_link">https://yuzu-mirror.github.io/help/quickstart/#dumping-installed-updates</string>
    <string name="custom_driver_not_supported">Controladores personalizados no soportados</string>
    <string name="custom_driver_not_supported_description">La carga de controladores personalizados no está disponible para este dispositivo.\n¡Compruebe más adelante si se añadió el soporte a esta opción!</string>
-    <string name="manage_yuzu_data">Gestionar datos de Eden</string>
-    <string name="manage_yuzu_data_description">Importar/exportar el firmware, las claves, los datos de usuario, ¡y más!</string>
+    <string name="manage_yuzu_data">Administrar datos de Eden</string>
+    <string name="manage_yuzu_data_description">Importa/exporta el firmware, las claves, los datos de usuario, ¡y más!</string>
    <string name="game_folders">Carpetas de juegos</string>
    <string name="deep_scan">Escaneo recursivo </string>
    <string name="add_game_folder">Añadir carpeta con juegos</string>
@@ -350,8 +350,8 @@
        <item quantity="many">%d archivos de guardado importados con éxito.</item>
        <item quantity="other">%d archivos de guardado importados con éxito.</item>
    </plurals>
-    <string name="no_save_data_found">No se encontraron datos de guardado</string>
-    <string name="verify_installed_content">Verificar los contenidos instalados</string>
+    <string name="no_save_data_found">No hay archivos de guardado</string>
+    <string name="verify_installed_content">Verificar contenidos instalados</string>
    <string name="verify_installed_content_description">Comprueba todo el contenido instalado por si hubiese alguno corrupto</string>

    <string name="keys_missing">Faltan las claves de encriptación</string>
@@ -457,6 +457,8 @@
    <string name="fsr_sharpness">Nitidez FSR</string>
    <string name="fsr_sharpness_description">Ajusta la intensidad del filtro de enfoque al usar el contraste dinámico de FSR.</string>
    <string name="renderer_anti_aliasing">Método de suavizado de bordes</string>
+    <string name="renderer_optimize_spirv_output">Optimizar la salida de SPIRV</string>
+    <string name="renderer_optimize_spirv_output_description">Optimiza los sombreadores compilados para mejorar la eficiencia de la GPU.</string>


    <string name="advanced">Avanzado</string>
@@ -471,6 +473,8 @@
    <string name="vram_usage_mode_description">Controla con qué agresividad el emulador asigna y libera la memoria de la GPU.</string>
    <string name="accelerate_astc">Método de decodificación ASTC</string>
    <string name="accelerate_astc_description">Elija cómo se descodifican las texturas comprimidas ASTC para el renderizado: CPU (lento, seguro), GPU (rápido, recomendado) o CPU Async (sin tirones, puede causar problemas)</string>
+    <string name="astc_recompression">Método de recompresión ASTC</string>
+    <string name="astc_recompression_description">Elija cómo se recomprimen las texturas ASTC para mejorar la compatibilidad y el rendimiento. Habilitar esta opción ahorra VRAM pero puede reducir la calidad de las texturas.</string>

    <string name="sync_memory_operations">Sincronizar operaciones de memoria</string>
    <string name="sync_memory_operations_description">Garantiza la consistencia de los datos entre las operaciones de computación y memoria. Esta opción debería solucionar problemas en algunos juegos, pero también puede reducir el rendimiento en algunos casos. Los juegos de Unreal Engine 4 a menudo ven los cambios más significativos de los mismos.</string>
@@ -478,16 +482,12 @@
    <string name="use_disk_shader_cache_description">Reduce los tirones almacenando y cargando los sombreadores generados.</string>
    <string name="renderer_force_max_clock">Forzar velocidad al máximo (solo Adreno)</string>
    <string name="renderer_force_max_clock_description">Fuerza a la GPU a ejecutarse a la velocidad máxima de reloj posible (se seguirán aplicando restricciones térmicas).</string>
-    <string name="renderer_asynchronous_gpu_emulation">Emulación de GPU asíncrona</string>
-    <string name="renderer_asynchronous_gpu_emulation_description">Ejecuta la emulación de la GPU de forma asíncrona para reducir los bloqueos de la CPU y mejorar el rendimiento. Desactiva esta opción solo si experimentas problemas de sincronización.</string>
-    <string name="renderer_async_presentation">Presentación asíncrona</string>
-    <string name="renderer_async_presentation_description">Mejora ligeramente el rendimiento al mover la presentación a un hilo independiente de la CPU.</string>
    <string name="renderer_reactive_flushing">Usar limpieza reactiva</string>
    <string name="renderer_reactive_flushing_description">Mejora la precisión de renderizado en algunos juegos, pero reduce el rendimiento.</string>
    <string name="enable_buffer_history">Activar el historial del búfer</string>
    <string name="enable_buffer_history_description">Permite el acceso al estado del búfer anterior. Esta opción puede mejorar la calidad de renderizado y la consistencia en el rendimiento de algunos juegos.</string>
    <string name="use_optimized_vertex_buffers">Búferes de vértices optimizados</string>
-    <string name="use_optimized_vertex_buffers_description">Permite la optimización del enlace del búfer de vértices para un mejor rendimiento. Requiere controladores Mesa 26.0+ Turnip/ controladores QCOM. Causará fallos con controladores Turnip más antiguos.</string>
+    <string name="use_optimized_vertex_buffers_description">Permite la vinculación optimizada del búfer de vértices para un mejor rendimiento. Requiere controladores de Mesa 26.0+ Turnip. Se producirán fallos en controladores más antiguos.</string>

    <string name="hacks">Hacks</string>

@@ -496,9 +496,7 @@
    <string name="skip_cpu_inner_invalidation">Omitir invalidación interna de la CPU</string>
    <string name="skip_cpu_inner_invalidation_description">Omite ciertas invalidaciones de caché de la CPU durante las actualizaciones de memoria, lo que reduce el uso de la CPU y mejora su rendimiento. Esto puede causar fallos o bloqueos en algunos juegos.</string>
    <string name="fix_bloom_effects">Arreglar los efectos de resplandor</string>
-    <string name="fix_bloom_effects_description">Reduce el efecto de resplandor en LA/EOW (Adreno A6XX - A7XX/ Turnip), elimina el resplandor en Burnout. Advertencia: puede causar artefactos gráficos en otros juegos.</string>
-    <string name="emulate_bgr565">Emular BGR565</string>
-    <string name="emulate_bgr565_description">Soluciona problemas con colores invertidos en juegos, artefactos o sombras extrañas.</string>
+    <string name="fix_bloom_effects_description">Reduce el efecto de resplandor en LA/EOW (Adreno 700), elimina el resplandor en Burnout. Advertencia: puede causar artefactos gráficos en otros juegos.</string>
    <string name="renderer_asynchronous_shaders">Usar sombreadores asíncronos</string>
    <string name="renderer_asynchronous_shaders_description">Compila los sombreadores de forma asíncrona. Esto puede reducir los tirones, pero también puede introducir errores gráficos.</string>
    <string name="gpu_unswizzle_settings">Ajustes de desentrelazado de la GPU</string>
@@ -521,6 +519,10 @@
    <string name="disabled">Desactivado</string>
    <string name="vertex_input_dynamic_state">Estado dinámico de entrada de vértices</string>
    <string name="vertex_input_dynamic_state_description">Activa la función de estado dinámico de entrada de vértices para una mejor calidad y rendimiento.</string>
+    <string name="provoking_vertex">Vértice provocante</string>
+    <string name="provoking_vertex_description">Mejora la iluminación y el manejo de vértices en ciertos juegos. Solo es compatible con las GPU Vulkan 1.0+.</string>
+    <string name="descriptor_indexing">Indexación del descriptor</string>
+    <string name="descriptor_indexing_description">Mejora la textura y el manejo del búfer, así como la capa de traducción Maxwell. Compatible con algunas GPU Vulkan 1.1 y todas las GPU Vulkan 1.2+.</string>
    <string name="sample_shading_fraction">Muestreo de sombreado</string>
    <string name="sample_shading_fraction_description">Permite que el sombreador de fragmentos se ejecute por muestra en un fragmento multimuestreado, en lugar de una sola vez por fragmento. Mejora la calidad de los gráficos a coste de algo de rendimiento.</string>

@@ -766,8 +768,8 @@
    <string name="developer">Desarrollador</string>
    <string name="version">Versión</string>
    <string name="copy_details">Copiar detalles</string>
-    <string name="add_ons">Complementos</string>
-    <string name="add_ons_description">Alternar mods, actualizaciones y contenido descargable</string>
+    <string name="add_ons">Extras/Add-ons</string>
+    <string name="add_ons_description">Activa/desactiva mods, actualizaciones y contenidos descargables</string>
    <string name="playtime">Tiempo jugado:</string>
    <string name="reset_playtime">Borrar tiempo de juego</string>
    <string name="reset_playtime_description">Restablecer el tiempo de juego actual a 0 segundos</string>
@@ -789,28 +791,28 @@
    <string name="cleared_shaders_successfully">Sombreadores limpiados con éxito</string>
    <string name="driver_shader_wipe_dialog_title">Sombreadores limpiados</string>
    <string name="driver_shader_wipe_dialog_message">Eden ha limpiado automáticamente todos los sombreadores guardados para mantener la canalización de Vulkan válida. Esto es esencial al cambiar o actualizar los controladores de la GPU para prevenir errores y fallos gráficos. Es posible que experimente algunas interrupciones durante la reconstrucción de los sombreadores.</string>
-    <string name="addons_game">Complementos: %1$s</string>
+    <string name="addons_game">Addons: %1$s</string>
    <string name="save_data">Datos de guardado</string>
-    <string name="save_data_description">Gestiona los datos de guardado de este juego</string>
+    <string name="save_data_description">Controla los datos de guardado de este juego</string>
    <string name="delete_save_data">Borrar datos de guardado</string>
-    <string name="delete_save_data_description">Elimina todos los datos de guardado especificos de este juego</string>
-    <string name="delete_save_data_warning_description">Esto eliminará de manera permanente todos los datos de guardado de este juego. ¿Está seguro de que quiere continuar\?</string>
+    <string name="delete_save_data_description">Elimina todos los datos de guardado de este juego</string>
+    <string name="delete_save_data_warning_description">Ésto elimina de manera permanente todos los datos de guardado de este juego. ¿Seguro que quieres continuar?</string>
    <string name="save_data_deleted_successfully">Datos de guardado eliminados con éxito</string>
    <string name="select_content_type">Tipo de contenido</string>
    <string name="updates_and_dlc">Actualizaciones y contenido descargable</string>
    <string name="mods_and_cheats">Mods y trucos</string>
-    <string name="addon_notice">Aviso importante de complementos</string>
+    <string name="addon_notice">Aviso importante de addons</string>
    <!-- \"cheats/" "romfs/" and \"exefs/ should not be translated -->
    <string name="addon_notice_description">Para instalar mods y trucos, debe seleccionar una carpeta que contenga los directorios cheats/, romfs/, o exefs/ . ¡No podemos confirmar si éstos serán compatibles con su juego, así que tenga cuidado!</string>
    <string name="invalid_directory">Directorio no válido</string>
    <!-- \"cheats/" "romfs/" and \"exefs/ should not be translated -->
    <string name="invalid_directory_description">Por favor, asegúrese de que el directorio que ha selecionado incluye las carpetas cheats/, romfs/, o exefs/ e inténtelo de nuevo.</string>
-    <string name="addon_installed_successfully">Complemento instalado con éxito</string>
+    <string name="addon_installed_successfully">Addon instalado con éxito</string>
    <string name="verifying_content">Verificando contenido...</string>
    <string name="content_install_notice">Aviso importante de contenido</string>
    <string name="content_install_notice_description">El contenido seleccionado no es de este juego.\n¿Instalar aun que\?</string>
    <string name="confirm_uninstall">Confirmar desinstalación</string>
-    <string name="confirm_uninstall_description">¿Está seguro de que quiere desinstalar este complemento\?</string>
+    <string name="confirm_uninstall_description">¿De verdad quieres desinstalar este addon?</string>
    <string name="verify_integrity">Verificar integridad</string>
    <string name="verifying">Verificando...</string>
    <string name="verify_success">¡La verificación de integridad ha sido un éxito!</string>
@@ -826,14 +828,14 @@

    <!-- ROM loading errors -->
    <string name="loader_error_encrypted">Su ROM está encriptada</string>
-    <string name="loader_error_encrypted_roms_description"><![CDATA[Siga las guías para volver a volcar sus <a href=\"https://yuzu-mirror.github.io/help/quickstart/#dumping-physical-titles-game-cards\">tarjetas de juego</a> o <a href=\"https://yuzu-mirror.github.io/help/quickstart/#dumping-digital-titles-eshop\">títulos instalados</a>.]]></string>
-    <string name="loader_error_encrypted_keys_description"><![CDATA[Por favor, compruebe que su archivo <a href=\"https://yuzu-mirror.github.io/help/quickstart/#dumping-prodkeys-and-titlekeys\">prod.keys</a> está instalado, para que los juegos sean desencriptados.]]></string>
+    <string name="loader_error_encrypted_roms_description"><![CDATA[Siga las guías para volver a volcar sus <a href=\"https://yuzu-mirror.github.io/help/quickstart/#dumping-physical-titles-game-cards\">tarjetas de juego</a> o <a href=\"https://yuzu-mirror.github.io/help/quickstart/#dumping-digital-titles-eshop\">títulos digitales</a>.]]></string>
+    <string name="loader_error_encrypted_keys_description"><![CDATA[Por favor, compruebe que su archivo <a href=\"https://yuzu-mirror.github.io/help/quickstart/#dumping-prodkeys-and-titlekeys\">prod.keys</a> está instalado, para que los juegos sean descifrados.]]></string>
    <string name="loader_error_video_core">Ocurrió un error al inicializar el núcleo de video, posiblemente debido a una incompatibilidad con el driver seleccionado</string>
    <string name="loader_error_video_core_description">Esto suele deberse a un controlador de la GPU incompatible. La instalación de un controlador de la GPU personalizado puede resolver este problema.</string>
    <string name="loader_error_file_not_found">Archivo ROM no existe</string>

    <string name="loader_requires_firmware">El juego requiere firmware</string>
-    <string name="loader_requires_firmware_description"><![CDATA[El juego que intenta iniciar requiere el firmware para arrancar o pasar el menú de inicio. Por favor <a href=\"https://yuzu-mirror.github.io/help/quickstart\"> vuelque e instale el firmware</a>, o pulse \"Aceptar\" para continuar de todos modos.]]></string>
+    <string name="loader_requires_firmware_description"><![CDATA[El juego que intentas iniciar requiere firmware para arrancar o pasar el menú de inicio. Por favor <a href=\"https://yuzu-mirror.github.io/help/quickstart\"> vuelca e instala el firmware</a>, o pulsa \"Aceptar\" para continuar de todos modos.]]></string>

    <!-- Intent Launch strings -->
    <string name="searching_for_game">Buscando juego...</string>
@@ -989,6 +991,9 @@
    <string name="dma_accuracy_unsafe">Inseguro</string>
    <string name="dma_accuracy_safe">Seguro</string>

+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">Sin compresión</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">Conservador</string>
    <string name="vram_usage_aggressive">Agresivo</string>

@@ -1055,8 +1060,6 @@
    <string name="theme_material_you">Material You</string>
    <string name="app_settings">Configuración de la aplicación</string>
    <string name="theme_and_color">Tema y color</string>
-    <string name="fullscreen_mode">Modo pantalla completa</string>
-    <string name="fullscreen_mode_description">Ocultar las barras del sistema de Android. Desliza la pantalla desde una esquina para mostrarlas temporalmente.</string>

    <!-- Theme Modes -->
    <string name="change_theme_mode">Cambiar modo del tema</string>
@@ -1087,7 +1090,7 @@
    <string name="blue">Azul</string>
    <string name="cyan">Cian</string>
    <string name="red">Rojo</string>
-    <string name="green">Verde</string>
+    <string name="green">Verde (Predeterminado)</string>
    <string name="yellow">Amarillo</string>
    <string name="orange">Naranja</string>
    <string name="pink">Rosa</string>
@@ -1116,7 +1119,7 @@
    <string name="airplane_mode">Modo avión</string>
    <string name="airplane_mode_description">Pasa el modo avión al sistema operativo Switch</string>

-    <string name="enable_overlay">Habilitar el applet de superposición</string>
+    <string name="enable_overlay">Habilitar el Applet de superposición</string>
    <string name="enable_overlay_description">Activa el applet integrado superpuesto de Horizon. Mantenga pulsado el botón de inicio durante 1 segundo para que aparezca.</string>

    <!-- Profile Management -->
@@ -1153,6 +1156,5 @@
    <string name="license_fidelityfx_fsr_description">Upscaling de alta calidad de AMD</string>
    <string name="external_content">Contenido externo</string>
    <string name="add_folders">Añadir carpeta</string>
-    <string name="percent">%1$d%%</string>

 </resources>
@@ -71,6 +71,10 @@
    <string name="uninstall_firmware_description">حذف فرمور آن را از دستگاه پاک می‌کند و ممکن است بر سازگاری بازی‌ها تأثیر بگذارد</string>
    <string name="firmware_uninstalling">در حال حذف فرمور</string>
    <string name="firmware_uninstalled_success">فرمور با موفقیت حذف شد</string>
+    <string name="provoking_vertex">رأس تحریک‌کننده</string>
+    <string name="provoking_vertex_description">نورپردازی و مدیریت رأس را در برخی بازی‌ها بهبود می‌بخشد. فقط در کارت‌های گرافیک با پشتیبانی از ولکان 1.0+ قابل استفاده است</string>
+    <string name="descriptor_indexing">نمایه‌سازی توصیفگر</string>
+    <string name="descriptor_indexing_description">مدیریت بافت‌ها و بافرها و همچنین لایه ترجمه ماکسول را بهبود می‌بخشد. توسط برخی کارت‌های گرافیک ولکان 1.1 و تمام کارت‌های گرافیک ولکان 1.2+ پشتیبانی می‌شود</string>
    <string name="fast_gpu_time">فاکتور اورکلاک GPU</string>
    <string name="fast_gpu_time_description">برای حداکثر عملکرد از 128 و برای حداکثر وفاداری گرافیکی از 512 استفاده کنید.</string>
    <string name="fast_gpu_medium">متوسط (256)</string>
@@ -110,6 +114,12 @@
    <string name="accelerate_astc_gpu">GPU</string>
    <string name="accelerate_astc_async">CPU ناهمگام</string>

+    <!-- ASTC Recompression Method -->
+    <string name="astc_recompression">روش فشرده‌سازی مجدد ASTC</string>
+    <string name="astc_recompression_description">انتخاب کنید که بافت‌های ASTC چگونه فشرده‌سازی مجدد شوند تا سازگاری و عملکرد بهبود یابد. فعال کردن این گزینه VRAM را ذخیره می‌کند اما ممکن است کیفیت بافت را کاهش دهد.</string>
+    <string name="astc_recompression_uncompressed">فشرده‌نشده</string>
+    <string name="astc_recompression_bc1">BC1 (کیفیت پایین)</string>
+    <string name="astc_recompression_bc3">BC3 (کیفیت متوسط)</string>

    <!-- VRAM Usage Mode -->
    <string name="vram_usage_mode">حالت استفاده از VRAM</string>
@@ -125,6 +135,8 @@
    <string name="nvdec_emulation_none">هیچ‌کدام</string>

    <!-- Optimize Spir-V output -->
+    <string name="renderer_optimize_spirv_output">بهینه‌سازی خروجی Spir-V</string>
+    <string name="renderer_optimize_spirv_output_description">شیدر کامپایل شده را برای بهبود کارایی GPU بهینه‌سازی می‌کند.</string>
    <string name="never">هرگز</string>
    <string name="on_load">در هنگام بارگذاری</string>
    <string name="always">همیشه</string>
@@ -275,11 +275,8 @@
    <string name="cpu_info">Informations sur le processeur central</string>
    <string name="gpu_information">Informations sur le processeur graphique</string>
    <string name="vulkan_driver_version">Version du pilote Vulkan</string>
-    <string name="error_getting_emulator_info">Impossible d’obtenir les infos de l’émulateur</string>
    <string name="memory_info">Informations sur la mémoire</string>
    <string name="total_memory">Capacité totale de mémoire</string>
-    <string name="soc">SOC:</string>
-
    <string name="warning_help">Aide</string>
    <string name="warning">Avertissement</string>
    <string name="warning_skip">Sauter</string>
@@ -317,9 +314,6 @@
    <string name="share_log">Partager les logs de débogage</string>
    <string name="share_log_description">Partagez le fichier de log de Eden pour déboguer les problèmes.</string>
    <string name="share_log_missing">Aucun fichier de log trouvé</string>
-    <string name="share_gpu_log">Partager les logs du GPU</string>
-    <string name="share_gpu_log_description">Partage les logs du GPU générés par Eden afin de déboguer les problèmes graphiques.</string>
-    <string name="share_gpu_log_missing">Aucun fichier de log du GPU trouvé,</string>
    <string name="install_game_content">Installer le contenu du jeu</string>
    <string name="install_game_content_description">Installer une mise à jour ou un DLC</string>
    <string name="installing_game_content">Installation du contenu en cours...</string>
@@ -375,9 +369,7 @@
    <string name="qlaunch_description">Lancer des applications depuis l\'écran d\'accueil du système</string>
    <string name="applets">Lanceur d\'applets</string>
    <string name="applets_description">Lancer des applets système en utilisant le firmware installé</string>
-    <string name="applets_error_firmware">Aucun firmware installé</string>
    <string name="applets_error_applet">Applet non disponible</string>
-    <string name="applets_error_description"><![CDATA[Veuillez vérifier que votre fichier<a href=\"https://yuzu-mirror.github.io/help/quickstart/#dumping-prodkeys-and-titlekeys\">prod.keys</a> et le<a href=\"https://yuzu-mirror.github.io/help/quickstart/#dumping-system-firmware\">firmware</a>sont installés et réessayez.]]></string>
    <string name="album_applet">Album</string>
    <string name="album_applet_description">Afficher les images stockées dans le dossier de captures d\'écran de l\'utilisateur avec le visualiseur de photos système.</string>
    <string name="mii_edit_applet">Éditeur Mii</string>
@@ -395,7 +387,6 @@
    <string name="copied_to_clipboard">Copié dans le presse-papier</string>
    <string name="about_app_description">Un émulateur Switch open source</string>
    <string name="contributors">Contributeurs</string>
-    <string name="contributors_description">Les gens qui ont rendu possible Eden pour Android</string>
    <string name="licenses_description">Des projets qui rendent possible Eden pour Android</string>
    <string name="build">Build</string>
    <string name="user_data">Données utilisateur</string>
@@ -412,10 +403,6 @@
    <string name="frame_limit_enable_description">Limiter la vitesse d\'émulation à un pourcentage spécifié de la vitesse normale</string>
    <string name="frame_limit_slider">Limiter le pourcentage de vitesse</string>
    <string name="frame_limit_slider_description">Spécifier le pourcentage pour limiter la vitesse d\'émulation. 100% correspond à la vitesse normale. Des valeurs plus élevées ou plus basses augmenteront ou diminueront la limite de vitesse.</string>
-    <string name="turbo_speed_limit">Vitesse turbo</string>
-    <string name="turbo_speed_limit_description">Lorsque le mode Turbo est activé, l\'émulation s\'exécute à cette vitesse.</string>
-    <string name="slow_speed_limit">Vitesse lente</string>
-    <string name="slow_speed_limit_description">Lorsque le mode Lent est activé, l\'émulation s\'exécute à cette vitesse.</string>
    <string name="cpu_backend">Backend du CPU</string>
    <string name="cpu_accuracy">Précision du CPU</string>
    <string name="value_with_units">%1$s%2$s</string>
@@ -432,9 +419,6 @@
    <string name="use_custom_rtc_description">Vous permet de définir une horloge en temps réel personnalisée distincte de l\'heure actuelle de votre système.</string>
    <string name="set_custom_rtc">Définir l\'horloge RTC personnalisée</string>

-    <!-- CPU -->
-    <string name="fast_cpu_time">Overclock du CPU</string>
-    <string name="fast_cpu_time_description">Force le CPU émulé à fonctionner à une fréquence plus élevée, en contournant certaines limitations de FPS. Utilisez Boost (1700 MHz) pour atteindre la fréquence native maximale de la Nintendo Switch, ou Fast (2000 MHz) pour doubler la fréquence. C’est un “hack”. Certains chipsets moins puissants peuvent voir leurs performances réduites et les jeux peuvent se comporter différemment.</string>
    <string name="custom_cpu_ticks">Ticks CPU personnalisés</string>
    <string name="custom_cpu_ticks_description">Définissez une valeur personnalisée de ticks CPU. Des valeurs plus élevées peuvent améliorer les performances, mais peuvent aussi provoquer des gels du jeu. Une plage de 77 à 21000 est recommandée.</string>
    <string name="cpu_ticks">Ticks</string>
@@ -457,6 +441,7 @@
    <string name="fsr_sharpness">Netteté FSR</string>
    <string name="fsr_sharpness_description">Détermine à quel point l\'image sera affinée lors de l\'utilisation du contraste dynamique FSR.</string>
    <string name="renderer_anti_aliasing">Méthode d\'anticrénelage</string>
+    <string name="renderer_optimize_spirv_output_description">Optimise le shader compilé pour améliorer l\'efficacité du GPU.</string>


    <string name="dma_accuracy">Précision DMA</string>
@@ -467,6 +452,8 @@
    <string name="vram_usage_mode_description">Gestion de la mémoire GPU</string>
    <string name="accelerate_astc">Méthode ASTC</string>
    <string name="accelerate_astc_description">Choisissez comment les textures compressées ASTC sont décodées pour le rendu : CPU (lent, sûr), GPU (rapide, recommandé) ou CPU Async (pas de saccades, peut causer des problèmes)</string>
+    <string name="astc_recompression">Recompression ASTC</string>
+    <string name="astc_recompression_description">Choisissez comment les textures ASTC sont recompressées pour améliorer la compatibilité et les performances. Activer cette option économise la VRAM mais peut réduire la qualité des textures.</string>

    <string name="sync_memory_operations">Synchroniser les opérations mémoire</string>
    <string name="sync_memory_operations_description">Garantit la cohérence des données entre les opérations de calcul et de mémoire. Cette option devrait résoudre les problèmes dans certains jeux, mais peut réduire les performances dans certains cas. Les jeux utilisant Unreal Engine 4 semblent être les plus affectés.</string>
@@ -484,6 +471,10 @@
    <string name="disabled">Désactivé</string>
    <string name="vertex_input_dynamic_state">État dynamique d\'entrée de sommet</string>
    <string name="vertex_input_dynamic_state_description">Active la fonctionnalité d\'état dynamique des entrées de sommets pour une meilleure qualité et de meilleures performances.</string>
+    <string name="provoking_vertex">Provoque des Vertex</string>
+    <string name="provoking_vertex_description">Améliore l`éclairage et la gestion des vertex dans certains jeux. Pris en charge uniquement par les GPU Vulkan 1.0+.</string>
+    <string name="descriptor_indexing">Indexation des descripteurs</string>
+    <string name="descriptor_indexing_description">Améliore la gestion des textures et des tampons, ainsi que la couche de traduction Maxwell. Pris en charge par certains GPU Vulkan 1.1 et tous les GPU Vulkan 1.2+.</string>
    <string name="display">Affichage</string>

    <string name="renderer_screen_layout">Orientation</string>
@@ -859,6 +850,9 @@
    <string name="dma_accuracy_unsafe">Dangereux</string>
    <string name="dma_accuracy_safe">Sûr</string>

+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">Non compressé</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">Conservateur</string>
    <string name="vram_usage_aggressive">Agressif</string>

@@ -903,6 +897,7 @@
    <string name="theme_material_you">Material You</string>
    <string name="app_settings">Paramètres de l’App</string>
    <string name="theme_and_color">Thème et Couleur</string>
+
    <!-- Theme Modes -->
    <string name="change_theme_mode">Changer le mode de thème</string>
    <string name="theme_mode_follow_system">Automatique</string>
@@ -362,6 +362,7 @@
    <string name="fsr_sharpness">חדות FSR</string>
    <string name="fsr_sharpness_description">קובע את מידת החדות בעת שימוש ב-FSR.</string>
    <string name="renderer_anti_aliasing">שיטת Anti-aliasing</string>
+    <string name="renderer_optimize_spirv_output_description">משפר את השאדר המהודר כדי להגביר את יעילות ה-GPU.</string>


    <string name="dma_accuracy">דיוק DMA</string>
@@ -372,6 +373,8 @@
    <string name="vram_usage_mode_description">שליטה בקצב הקצאת ושחרור זיכרון GPU</string>
    <string name="accelerate_astc">שיטת פענוח ASTC</string>
    <string name="accelerate_astc_description">בחר כיצד לפרק את הטקסטורות הדחוסות ב-ASTC עבור רינדור: CPU (איטי, בטוח), GPU (מהיר, מומלץ) או CPU Async (ללא קפיצות, עלול לגרום לבעיות)</string>
+    <string name="astc_recompression">שיטת דחיסת ASTC</string>
+    <string name="astc_recompression_description">בחר כיצד דחיסה מחדש של טקסטורות ASTC משפרת תאימות וביצועים. הפעלת אפשרות זו חוסכת VRAM אך עלולה להוריד את איכות הטקסטורה.</string>

    <string name="sync_memory_operations">סנכרון פעולות זיכרון</string>
    <string name="sync_memory_operations_description">מבטיח עקביות נתונים בין פעולות חישוב וזיכרון. אפשרות זו אמורה לתקן בעיות במשחקים מסוימים, אך עלולה להפחית ביצועים במקרים מסוימים. נראה שהמשחקים עם Unreal Engine 4 הם המושפעים ביותר.</string>
@@ -387,6 +390,10 @@
    <string name="renderer_asynchronous_shaders_description">מקמפל שיידרים באופן אסינכרוני. זה עשוי להפחית קפיצות אך גם עלול לגרום לתקלות גרפיות.</string>
    <string name="dyna_state">מצב דינמי מורחב</string>
    <string name="disabled">מושבת</string>
+    <string name="provoking_vertex">קודקוד מעורר</string>
+    <string name="provoking_vertex_description">משפר תאורה וטיפול בקודקודים במשחקים מסוימים. נתמך רק בכרטיסי מסך עם Vulkan 1.0+.</string>
+    <string name="descriptor_indexing">אינדוקס תיאורים</string>
+    <string name="descriptor_indexing_description">משפר טיפול במרקמים ומאגרים, כמו גם בשכבת התרגום של Maxwell. נתמך בחלק מכרטיסי ה-Vulkan 1.1 ובכל כרטיסי ה-Vulkan 1.2+.</string>
    <string name="display">תצוגה</string>

    <string name="renderer_screen_layout">כיוון</string>
@@ -615,6 +622,9 @@

    <!-- DMA Accuracy -->
    <string name="dma_accuracy_default">ברירת מחדל</string>
+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">לא דחוס</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">שמרני</string>
    <string name="vram_usage_aggressive">אגרסיבי</string>

@@ -351,6 +351,7 @@
    <string name="fsr_sharpness">FSR élesség</string>
    <string name="fsr_sharpness_description">Meghatározza, milyen éles lesz a kép az FSR dinamikus kontraszt használata közben.</string>
    <string name="renderer_anti_aliasing">Élsimítási módszer</string>
+    <string name="renderer_optimize_spirv_output_description">Optimalizálja a lefordított shadert a GPU hatékonyságának javításáért.</string>


    <string name="dma_accuracy">DMA pontosság</string>
@@ -361,6 +362,8 @@
    <string name="vram_usage_mode_description">GPU memória kezelésének módja</string>
    <string name="accelerate_astc">ASTC dekódolási módszer</string>
    <string name="accelerate_astc_description">Válassza ki, hogyan legyenek dekódolva az ASTC tömörített textúrák a rendereléshez: CPU (lassú, biztonságos), GPU (gyors, ajánlott) vagy CPU Async (nincs megakadás, de problémákat okozhat)</string>
+    <string name="astc_recompression">ASTC újratömörítési módszer</string>
+    <string name="astc_recompression_description">Válassza ki, hogyan történik az ASTC textúrák újratömörítése a kompatibilitás és a teljesítmény javításáért. Ez az opció VRAM-ot takarít meg, de csökkentheti a textúra minőségét.</string>

    <string name="sync_memory_operations">Memória-műveletek szinkronizálása</string>
    <string name="sync_memory_operations_description">Biztosítja az adatok konzisztenciáját a számítási és memória-műveletek között. Ez az opciónak javítania kell néhány játékban előforduló problémát, de bizonyos esetekben csökkentheti a teljesítményt. Az Unreal Engine 4-et használó játékok látszanak a legérintettebbek.</string>
@@ -376,6 +379,10 @@
    <string name="renderer_asynchronous_shaders_description">A shaderek aszinkron fordítása. Csökkentheti a belassulásokat, de hibákat is okozhat.</string>
    <string name="dyna_state">Kiterjesztett Dinamikus Állapot</string>
    <string name="disabled">Letiltva</string>
+    <string name="provoking_vertex">Provokáló csúcs</string>
+    <string name="provoking_vertex_description">Javítja a világítást és a csúcskezelést bizonyos játékokban. Csak Vulkan 1.0+ GPU-kon támogatott.</string>
+    <string name="descriptor_indexing">Deskriptor Indexelés</string>
+    <string name="descriptor_indexing_description">Javítja a textúrák és pufferek kezelését, valamint a Maxwell fordítási réteget. Néhány Vulkan 1.1 GPU és minden Vulkan 1.2+ GPU támogatja.</string>
    <string name="display">Kijelző</string>

    <string name="renderer_screen_layout">Orientáció</string>
@@ -704,6 +711,9 @@

    <!-- DMA Accuracy -->
    <string name="dma_accuracy_default">Alapértelmezett</string>
+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">Tömörítetlen</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">Konzervatív</string>
    <string name="vram_usage_aggressive">Aggresszív</string>

@@ -383,6 +383,7 @@
    <string name="fsr_sharpness">Ketajaman FSR</string>
    <string name="fsr_sharpness_description">Menentukan seberapa tajam gambar akan terlihat saat menggunakan kontras dinamis FSR</string>
    <string name="renderer_anti_aliasing">Metode anti-aliasing</string>
+    <string name="renderer_optimize_spirv_output_description">Mengoptimalkan shader yang dikompilasi untuk meningkatkan efisiensi GPU.</string>


    <string name="dma_accuracy">Akurasi DMA</string>
@@ -393,6 +394,8 @@
    <string name="vram_usage_mode_description">Kontrol seberapa agresif emulator mengalokasikan dan membebaskan memori GPU.</string>
    <string name="accelerate_astc">Metode Dekoding ASTC</string>
    <string name="accelerate_astc_description">Pilih cara tekstur terkompresi ASTC didekode untuk rendering: CPU (lambat, aman), GPU (cepat, direkomendasikan), atau CPU Async (tanpa lag, mungkin menyebabkan masalah)</string>
+    <string name="astc_recompression">Metode Rekompresi ASTC</string>
+    <string name="astc_recompression_description">Pilih cara tekstur ASTC dikompresi ulang untuk meningkatkan kompatibilitas dan performa. Mengaktifkan opsi ini menghemat VRAM tetapi dapat menurunkan kualitas tekstur.</string>

    <string name="sync_memory_operations">Sinkronisasi Operasi Memori</string>
    <string name="sync_memory_operations_description">Memastikan konsistensi data antara operasi komputasi dan memori. Opsi ini seharusnya memperbaiki masalah di beberapa game, tetapi mungkin mengurangi performa dalam beberapa kasus. Game dengan Unreal Engine 4 tampaknya yang paling terpengaruh.</string>
@@ -408,6 +411,10 @@
    <string name="renderer_asynchronous_shaders_description">Kompilasi shader secara asinkron. Ini dapat mengurangi lag tetapi juga dapat menyebabkan glitch.</string>
    <string name="dyna_state">Status Dinamis Ekstensi</string>
    <string name="disabled">Dinonaktifkan</string>
+    <string name="provoking_vertex">Vertex Provokasi</string>
+    <string name="provoking_vertex_description">Meningkatkan pencahayaan dan penanganan vertex di beberapa game. Hanya didukung di GPU Vulkan 1.0+.</string>
+    <string name="descriptor_indexing">Pengindeks Deskriptor</string>
+    <string name="descriptor_indexing_description">Meningkatkan penanganan tekstur dan buffer, serta lapisan terjemahan Maxwell. Didukung oleh beberapa GPU Vulkan 1.1 dan semua GPU Vulkan 1.2+.</string>
    <string name="display">Tampilan</string>

    <string name="renderer_screen_layout">Orientasi</string>
@@ -750,6 +757,9 @@

    <!-- DMA Accuracy -->
    <string name="dma_accuracy_default">Bawaan</string>
+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">Tidak Dikompresi</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">Konservatif</string>
    <string name="vram_usage_aggressive">Agresif</string>

@@ -390,6 +390,7 @@
    <string name="fsr_sharpness">Nitidezza FSR</string>
    <string name="fsr_sharpness_description">Determina quanto sarà nitida l\'immagine utilizzando il contrasto dinamico di FSR</string>
    <string name="renderer_anti_aliasing">Metodo di anti-aliasing</string>
+    <string name="renderer_optimize_spirv_output_description">Ottimizza lo shader compilato per migliorare l\'efficienza della GPU.</string>


    <string name="dma_accuracy">Precisione DMA</string>
@@ -400,6 +401,8 @@
    <string name="vram_usage_mode_description">Controlla l`allocazione della memoria GPU</string>
    <string name="accelerate_astc">Metodo decodifica ASTC</string>
    <string name="accelerate_astc_description">Scegli come decodificare le texture compresse ASTC per il rendering: CPU (lento, sicuro), GPU (veloce, consigliato) o CPU Async (senza stuttering, può causare problemi)</string>
+    <string name="astc_recompression">Metodo ricompressione ASTC</string>
+    <string name="astc_recompression_description">Scegli come ricomprimere le texture ASTC per migliorare compatibilità e prestazioni. Abilitare questa opzione salva VRAM ma può ridurre la qualità delle texture.</string>

    <string name="sync_memory_operations">Sincronizza operazioni di memoria</string>
    <string name="sync_memory_operations_description">Garantisce la coerenza dei dati tra le operazioni di calcolo e memoria. Questa opzione dovrebbe risolvere problemi in alcuni giochi, ma potrebbe ridurre le prestazioni in alcuni casi. I giochi con Unreal Engine 4 sembrano essere i più colpiti.</string>
@@ -415,6 +418,10 @@
    <string name="renderer_asynchronous_shaders_description">Compila gli shader in modo asincrono. Può ridurre gli scatti, ma può anche causare glitch grafici.</string>
    <string name="dyna_state">Stato dinamico esteso</string>
    <string name="disabled">Disabilitato</string>
+    <string name="provoking_vertex">Vertice provocante</string>
+    <string name="provoking_vertex_description">Migliora illuminazione e gestione dei vertici in alcuni giochi. Supportato solo su GPU Vulkan 1.0+.</string>
+    <string name="descriptor_indexing">Indicizzazione descrittori</string>
+    <string name="descriptor_indexing_description">Migliora la gestione di texture e buffer, nonché il livello di traduzione Maxwell. Supportato da alcune GPU Vulkan 1.1 e tutte le GPU Vulkan 1.2+.</string>
    <string name="display">Schermo</string>

    <string name="renderer_screen_layout">Orientamento</string>
@@ -790,6 +797,9 @@
    <string name="dma_accuracy_unsafe">Non sicura</string>
    <string name="dma_accuracy_safe">Sicura</string>

+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">Non compresso</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">Conservativa</string>
    <string name="vram_usage_aggressive">Aggressiva</string>

@@ -834,6 +844,7 @@
    <string name="theme_material_you">Material You</string>
    <string name="app_settings">Impostazioni app</string>
    <string name="theme_and_color">Tema e colore</string>
+
    <!-- Theme Modes -->
    <string name="change_theme_mode">Cambia la modalità del tema</string>
    <string name="theme_mode_follow_system">Segue il Sistema</string>
@@ -349,6 +349,7 @@
    <string name="renderer_vsync">垂直同期モード</string>
    <string name="renderer_scaling_filter">ウィンドウ適応フィルター</string>
    <string name="renderer_anti_aliasing">アンチエイリアス方式</string>
+    <string name="renderer_optimize_spirv_output_description">コンパイル済みシェーダーを最適化し、GPUの効率を向上させます。</string>


    <string name="dma_accuracy">DMA精度</string>
@@ -359,6 +360,8 @@
    <string name="vram_usage_mode_description">VRAMの使用効率を設定</string>
    <string name="accelerate_astc">ASTCデコード方法</string>
    <string name="accelerate_astc_description">ASTC圧縮テクスチャのデコード方法を選択: CPU (低速、安全)、GPU (高速、推奨)、またはCPU非同期 (カクつきなし、問題が発生する可能性あり)</string>
+    <string name="astc_recompression">ASTC再圧縮方法</string>
+    <string name="astc_recompression_description">ASTCテクスチャの再圧縮方法を選択して互換性とパフォーマンスを向上させます。このオプションを有効にするとVRAMを節約できますが、テクスチャ品質が低下する可能性があります。</string>

    <string name="sync_memory_operations">メモリ操作の同期</string>
    <string name="sync_memory_operations_description">計算処理とメモリ操作間のデータ一貫性を保証します。 このオプションは一部のゲームの問題を修正しますが、場合によってはパフォーマンスが低下する可能性があります。 Unreal Engine 4のゲームが最も影響を受けるようです。</string>
@@ -374,6 +377,10 @@
    <string name="renderer_asynchronous_shaders_description">シェーダーを非同期でコンパイルします。これによりカクつきが減る可能性がありますが、グラフィックの不具合が発生する場合もあります。</string>
    <string name="dyna_state">拡張ダイナミックステート</string>
    <string name="disabled">無効</string>
+    <string name="provoking_vertex">プロボーキング頂点</string>
+    <string name="provoking_vertex_description">特定のゲームで照明と頂点処理を改善します。Vulkan 1.0+ GPUでのみサポートされています。</string>
+    <string name="descriptor_indexing">ディスクリプタインデキシング</string>
+    <string name="descriptor_indexing_description">テクスチャとバッファの処理、およびMaxwell翻訳レイヤーを改善します。一部のVulkan 1.1 GPUとすべてのVulkan 1.2+ GPUでサポートされています。</string>
    <string name="display">ディスプレイ</string>

    <string name="renderer_screen_layout">画面の向き</string>
@@ -611,6 +618,9 @@

    <!-- DMA Accuracy -->
    <string name="dma_accuracy_default">デフォルト</string>
+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">非圧縮</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">保守的</string>
    <string name="vram_usage_aggressive">積極的</string>

@@ -349,6 +349,7 @@
    <string name="renderer_vsync">수직동기화 모드</string>
    <string name="renderer_scaling_filter">윈도우 적응 필터</string>
    <string name="renderer_anti_aliasing">안티에일리어싱 방법</string>
+    <string name="renderer_optimize_spirv_output_description">컴파일된 셰이더를 최적화하여 GPU 효율성을 향상시킵니다.</string>


    <string name="dma_accuracy">DMA 정확도</string>
@@ -359,6 +360,8 @@
    <string name="vram_usage_mode_description">GPU 메모리 할당/해제 방식 선택</string>
    <string name="accelerate_astc">ASTC 디코딩 방법</string>
    <string name="accelerate_astc_description">ASTC 압축 텍스처의 디코딩 방식을 선택하세요: CPU (느림, 안전), GPU (빠름, 권장), 또는 CPU 비동기 (끊김 없음, 문제 발생 가능)</string>
+    <string name="astc_recompression">ASTC 재압축 방법</string>
+    <string name="astc_recompression_description">ASTC 텍스처의 재압축 방식을 선택하여 호환성과 성능을 향상시킵니다. 이 옵션을 활성화하면 VRAM을 절약할 수 있지만 텍스처 품질이 저하될 수 있습니다.</string>

    <string name="sync_memory_operations">메모리 작업 동기화</string>
    <string name="sync_memory_operations_description">컴퓨팅 및 메모리 작업 간 데이터 일관성을 보장합니다. 이 옵션은 일부 게임의 문제를 해결할 수 있지만 경우에 따라 성능이 저하될 수 있습니다. Unreal Engine 4 게임이 가장 큰 영향을 받는 것으로 보입니다.</string>
@@ -374,6 +377,10 @@
    <string name="renderer_asynchronous_shaders_description">셰이더를 비동기적으로 컴파일합니다. 이로 인해 끊김 현상이 줄어들 수 있지만 그래픽 오류가 발생할 수도 있습니다.</string>
    <string name="dyna_state">확장 동적 상태</string>
    <string name="disabled">비활성화됨</string>
+    <string name="provoking_vertex">프로보킹 버텍스</string>
+    <string name="provoking_vertex_description">일부 게임에서 조명과 버텍스 처리를 개선합니다. Vulkan 1.0+ GPU에서만 지원됩니다.</string>
+    <string name="descriptor_indexing">디스크립터 인덱싱</string>
+    <string name="descriptor_indexing_description">텍스처 및 버퍼 처리와 Maxwell 변환 레이어를 개선합니다. 일부 Vulkan 1.1 GPU 및 모든 Vulkan 1.2+ GPU에서 지원됩니다.</string>
    <string name="display">디스플레이</string>

    <string name="renderer_screen_layout">화면 방향</string>
@@ -663,6 +670,9 @@

    <!-- DMA Accuracy -->
    <string name="dma_accuracy_default">기본값</string>
+    <!-- ASTC Recompression Method Choices -->
+    <string name="astc_recompression_uncompressed">비압축</string>
+    <!-- ASTC Recompression Method Choices -->
    <string name="vram_usage_conservative">보수적</string>
    <string name="vram_usage_aggressive">적극적</string>

--- a/Show More
+++ b/Show More