fix qcom

fix applet
2026-08-15 13:16:43 +00:00 · 2026-05-01 18:09:51 +03:00 · 2026-05-01 18:09:24 +03:00
205 changed files with 9013 additions and 11118 deletions
@@ -0,0 +1,116 @@
+#!/bin/bash -e
+
+# SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+case "$1" in
+amd64 | "")
+    echo "Making amd64-v3 optimized build of Eden"
+    ARCH="amd64_v3"
+    ARCH_FLAGS="-march=x86-64-v3"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=v3)
+    ;;
+steamdeck | zen2)
+    echo "Making Steam Deck (Zen 2) optimized build of Eden"
+    ARCH="steamdeck"
+    ARCH_FLAGS="-march=znver2 -mtune=znver2"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=zen2 -DYUZU_SYSTEM_PROFILE=steamdeck)
+    ;;
+rog-ally | allyx | zen4)
+    echo "Making ROG Ally X (Zen 4) optimized build of Eden"
+    ARCH="rog-ally-x"
+    ARCH_FLAGS="-march=znver4 -mtune=znver4"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=zen2 -DYUZU_SYSTEM_PROFILE=steamdeck)
+    ;;
+legacy)
+    echo "Making amd64 generic build of Eden"
+    ARCH=amd64
+    ARCH_FLAGS="-march=x86-64 -mtune=generic"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=generic)
+    ;;
+aarch64)
+    echo "Making armv8-a build of Eden"
+    ARCH=aarch64
+    ARCH_FLAGS="-march=armv8-a -mtune=generic -w"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=generic)
+    ;;
+armv9)
+    echo "Making armv9-a build of Eden"
+    ARCH=armv9
+    ARCH_FLAGS="-march=armv9-a -mtune=generic -w"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=armv9)
+    ;;
+native)
+    echo "Making native build of Eden"
+    ARCH="$(uname -m)"
+    ARCH_FLAGS="-march=native -mtune=native"
+    export EXTRA_CMAKE_FLAGS=(-DYUZU_BUILD_PRESET=native)
+    ;;
+*)
+    echo "Invalid target $1 specified, must be one of native, amd64, steamdeck, zen2, allyx, rog-ally, zen4, legacy, aarch64, armv9"
+    exit 1
+    ;;
+esac
+
+export ARCH_FLAGS="$ARCH_FLAGS -O3"
+
+if [ -z "$NPROC" ]; then
+    NPROC="$(nproc)"
+fi
+
+if [ "$1" != "" ]; then shift; fi
+
+if [ "$TARGET" = "appimage" ]; then
+    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DCMAKE_INSTALL_PREFIX=/usr -DYUZU_ROOM=ON -DYUZU_ROOM_STANDALONE=OFF -DYUZU_CMD=OFF)
+else
+    # For the linux-fresh verification target, verify compilation without PCH as well.
+    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DYUZU_USE_PRECOMPILED_HEADERS=OFF)
+fi
+
+
+if [ "$DEVEL" != "true" ]; then
+    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DENABLE_UPDATE_CHECKER=ON)
+fi
+
+if [ "$USE_WEBENGINE" = "true" ]; then
+    WEBENGINE=ON
+else
+    WEBENGINE=OFF
+fi
+
+if [ "$USE_MULTIMEDIA" = "false" ]; then
+    MULTIMEDIA=OFF
+else
+    MULTIMEDIA=ON
+fi
+
+if [ -z "$BUILD_TYPE" ]; then
+    export BUILD_TYPE="Release"
+fi
+
+export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" $@)
+
+mkdir -p build && cd build
+cmake .. -G Ninja \
+    -DCMAKE_BUILD_TYPE="$BUILD_TYPE" \
+    -DENABLE_QT_TRANSLATION=ON \
+    -DUSE_DISCORD_PRESENCE=ON \
+    -DCMAKE_CXX_FLAGS="$ARCH_FLAGS" \
+    -DCMAKE_C_FLAGS="$ARCH_FLAGS" \
+    -DYUZU_USE_BUNDLED_QT=OFF \
+    -DYUZU_USE_BUNDLED_SDL2=OFF \
+    -DYUZU_USE_EXTERNAL_SDL2=ON \
+    -DYUZU_TESTS=OFF \
+    -DYUZU_USE_QT_MULTIMEDIA=$MULTIMEDIA \
+    -DYUZU_USE_QT_WEB_ENGINE=$WEBENGINE \
+    -DYUZU_USE_FASTER_LD=ON \
+    -DENABLE_LTO=ON \
+    "${EXTRA_CMAKE_FLAGS[@]}"
+
+ninja -j${NPROC}
+
+if [ -d "bin/Release" ]; then
+    strip -s bin/Release/*
+else
+    strip -s bin/*
+fi
@@ -0,0 +1,250 @@
+AppRun
+eden.desktop
+dev.eden_emu.eden.desktop
+shared/bin/eden
+shared/lib/lib.path
+shared/lib/ld-linux-x86-64.so.2
+shared/lib/libQt6Widgets.so.6.4.2
+shared/lib/libQt6DBus.so.6.4.2
+shared/lib/libudev.so.1.7.5
+shared/lib/libbrotlienc.so.1.0.9
+shared/lib/libbrotlidec.so.1.0.9
+shared/lib/libssl.so.3
+shared/lib/libcrypto.so.3
+shared/lib/libavcodec.so.59.37.100
+shared/lib/libavutil.so.57.28.100
+shared/lib/libQt6Gui.so.6.4.2
+shared/lib/libQt6Core.so.6.4.2
+shared/lib/libstdc++.so.6.0.30
+shared/lib/libm.so.6
+shared/lib/libgcc_s.so.1
+shared/lib/libc.so.6
+shared/lib/libdbus-1.so.3.32.4
+shared/lib/libbrotlicommon.so.1.0.9
+shared/lib/libswresample.so.4.7.100
+shared/lib/libvpx.so.7.1.0
+shared/lib/libwebpmux.so.3.0.10
+shared/lib/libwebp.so.7.1.5
+shared/lib/liblzma.so.5.4.1
+shared/lib/libdav1d.so.6.6.0
+shared/lib/librsvg-2.so.2.48.0
+shared/lib/libgobject-2.0.so.0.7400.6
+shared/lib/libglib-2.0.so.0.7400.6
+shared/lib/libcairo.so.2.11600.0
+shared/lib/libzvbi.so.0.13.2
+shared/lib/libz.so.1.2.13
+shared/lib/libsnappy.so.1.1.9
+shared/lib/libaom.so.3.6.0
+shared/lib/libcodec2.so.1.0
+shared/lib/libgsm.so.1.0.19
+shared/lib/libjxl.so.0.7.0
+shared/lib/libjxl_threads.so.0.7.0
+shared/lib/libmp3lame.so.0.0.0
+shared/lib/libopenjp2.so.2.5.0
+shared/lib/libopus.so.0.8.0
+shared/lib/librav1e.so.0.5.1
+shared/lib/libshine.so.3.0.1
+shared/lib/libspeex.so.1.5.2
+shared/lib/libSvtAv1Enc.so.1.4.1
+shared/lib/libtheoraenc.so.1.1.2
+shared/lib/libtheoradec.so.1.1.4
+shared/lib/libtwolame.so.0.0.0
+shared/lib/libvorbis.so.0.4.9
+shared/lib/libvorbisenc.so.2.0.12
+shared/lib/libx264.so.164
+shared/lib/libx265.so.199
+shared/lib/libxvidcore.so.4.3
+shared/lib/libva.so.2.1700.0
+shared/lib/libmfx.so.1.35
+shared/lib/libva-drm.so.2.1700.0
+shared/lib/libva-x11.so.2.1700.0
+shared/lib/libvdpau.so.1.0.0
+shared/lib/libX11.so.6.4.0
+shared/lib/libdrm.so.2.4.0
+shared/lib/libOpenCL.so.1.0.0
+shared/lib/libEGL.so.1.1.0
+shared/lib/libfontconfig.so.1.12.0
+shared/lib/libxkbcommon.so.0.0.0
+shared/lib/libGLX.so.0.0.0
+shared/lib/libOpenGL.so.0.0.0
+shared/lib/libpng16.so.16.39.0
+shared/lib/libharfbuzz.so.0.60000.0
+shared/lib/libmd4c.so.0.4.8
+shared/lib/libfreetype.so.6.18.3
+shared/lib/libicui18n.so.72.1
+shared/lib/libicuuc.so.72.1
+shared/lib/libdouble-conversion.so.3.1
+shared/lib/libb2.so.1.0.4
+shared/lib/libpcre2-16.so.0.11.2
+shared/lib/libzstd.so.1.5.4
+shared/lib/libsystemd.so.0.35.0
+shared/lib/libsoxr.so.0.1.2
+shared/lib/libcairo-gobject.so.2.11600.0
+shared/lib/libgdk_pixbuf-2.0.so.0.4200.10
+shared/lib/libgio-2.0.so.0.7400.6
+shared/lib/libxml2.so.2.9.14
+shared/lib/libpangocairo-1.0.so.0.5000.12
+shared/lib/libpango-1.0.so.0.5000.12
+shared/lib/libffi.so.8.1.2
+shared/lib/libpcre2-8.so.0.11.2
+shared/lib/libpixman-1.so.0.42.2
+shared/lib/libxcb-shm.so.0.0.0
+shared/lib/libxcb.so.1.1.0
+shared/lib/libxcb-render.so.0.0.0
+shared/lib/libXrender.so.1.3.0
+shared/lib/libXext.so.6.4.0
+shared/lib/libhwy.so.1.0.3
+shared/lib/liblcms2.so.2.0.14
+shared/lib/libogg.so.0.8.5
+shared/lib/libnuma.so.1.0.0
+shared/lib/libpthread.so.0
+shared/lib/libXfixes.so.3.1.0
+shared/lib/libX11-xcb.so.1.0.0
+shared/lib/libxcb-dri3.so.0.1.0
+shared/lib/libGLdispatch.so.0.0.0
+shared/lib/libexpat.so.1.8.10
+shared/lib/libgraphite2.so.3.2.1
+shared/lib/libicudata.so.72.1
+shared/lib/libgomp.so.1.0.0
+shared/lib/libcap.so.2.66
+shared/lib/libgcrypt.so.20.4.1
+shared/lib/liblz4.so.1.9.4
+shared/lib/libgmodule-2.0.so.0.7400.6
+shared/lib/libjpeg.so.62.3.0
+shared/lib/libmount.so.1.1.0
+shared/lib/libselinux.so.1
+shared/lib/libpangoft2-1.0.so.0.5000.12
+shared/lib/libfribidi.so.0.4.0
+shared/lib/libthai.so.0.3.1
+shared/lib/libXau.so.6.0.0
+shared/lib/libXdmcp.so.6.0.0
+shared/lib/libgpg-error.so.0.33.1
+shared/lib/libblkid.so.1.1.0
+shared/lib/libdatrie.so.1.4.0
+shared/lib/libbsd.so.0.11.7
+shared/lib/libmd.so.0.0.5
+shared/lib/libvulkan.so.1.3.239
+share/vulkan/icd.d/intel_hasvk_icd.x86_64.json
+shared/lib/libvulkan_intel_hasvk.so
+shared/lib/libwayland-client.so.0.21.0
+shared/lib/libxcb-present.so.0.0.0
+shared/lib/libxcb-xfixes.so.0.0.0
+shared/lib/libxcb-sync.so.1.0.0
+shared/lib/libxcb-randr.so.0.1.0
+shared/lib/libxshmfence.so.1.0.0
+share/vulkan/icd.d/intel_icd.x86_64.json
+shared/lib/libvulkan_intel.so
+share/vulkan/icd.d/lvp_icd.x86_64.json
+shared/lib/libvulkan_lvp.so
+shared/lib/libLLVM-15.so.1
+shared/lib/libedit.so.2.0.70
+shared/lib/libz3.so.4
+shared/lib/libtinfo.so.6.4
+share/vulkan/icd.d/radeon_icd.x86_64.json
+shared/lib/libvulkan_radeon.so
+shared/lib/libdrm_amdgpu.so.1.0.0
+shared/lib/libelf-0.188.so
+shared/lib/libVkLayer_MESA_device_select.so
+bin/qt.conf
+shared/lib/qt6/plugins/platforms/libqeglfs.so
+shared/lib/qt6/plugins/platforms/libqlinuxfb.so
+shared/lib/qt6/plugins/platforms/libqminimal.so
+shared/lib/qt6/plugins/platforms/libqminimalegl.so
+shared/lib/qt6/plugins/platforms/libqoffscreen.so
+shared/lib/qt6/plugins/platforms/libqvkkhrdisplay.so
+shared/lib/qt6/plugins/platforms/libqvnc.so
+shared/lib/qt6/plugins/platforms/libqwayland-egl.so
+shared/lib/qt6/plugins/platforms/libqwayland-generic.so
+shared/lib/qt6/plugins/platforms/libqxcb.so
+shared/lib/libQt6WaylandClient.so.6.4.2
+shared/lib/libwayland-cursor.so.0.21.0
+shared/lib/qt6/plugins/platformthemes/libqgtk3.so
+shared/lib/libgtk-3.so.0.2406.32
+shared/lib/libgdk-3.so.0.2406.32
+shared/lib/libatk-1.0.so.0.24609.1
+shared/lib/libepoxy.so.0.0.0
+shared/lib/libXi.so.6.1.0
+shared/lib/libatk-bridge-2.0.so.0.0.0
+shared/lib/libwayland-egl.so.1.21.0
+shared/lib/libXcursor.so.1.0.2
+shared/lib/libXdamage.so.1.1.0
+shared/lib/libXcomposite.so.1.0.0
+shared/lib/libXrandr.so.2.2.0
+shared/lib/libXinerama.so.1.0.0
+shared/lib/libdl.so.2
+shared/lib/libatspi.so.0.0.1
+share/glib-2.0/schemas/gschemas.compiled
+shared/lib/gio/modules/giomodule.cache
+shared/lib/gio/modules/libdconfsettings.so
+shared/lib/gio/modules/libgvfsdbus.so
+shared/lib/gvfs/libgvfscommon.so
+share/X11/xkb/rules/evdev
+share/X11/xkb/keycodes/evdev
+share/X11/xkb/keycodes/aliases
+share/X11/xkb/types/complete
+share/X11/xkb/types/basic
+share/X11/xkb/types/mousekeys
+share/X11/xkb/types/pc
+share/X11/xkb/types/iso9995
+share/X11/xkb/types/level5
+share/X11/xkb/types/extra
+share/X11/xkb/types/numpad
+share/X11/xkb/compat/complete
+share/X11/xkb/compat/basic
+share/X11/xkb/compat/ledcaps
+share/X11/xkb/compat/lednum
+share/X11/xkb/compat/iso9995
+share/X11/xkb/compat/mousekeys
+share/X11/xkb/compat/accessx
+share/X11/xkb/compat/misc
+share/X11/xkb/compat/ledscroll
+share/X11/xkb/compat/xfree86
+share/X11/xkb/compat/level5
+share/X11/xkb/compat/caps
+share/X11/xkb/symbols/pc
+share/X11/xkb/symbols/srvr_ctrl
+share/X11/xkb/symbols/keypad
+share/X11/xkb/symbols/altwin
+share/X11/xkb/symbols/us
+share/X11/xkb/symbols/inet
+shared/lib/qt6/plugins/platforminputcontexts/libcomposeplatforminputcontextplugin.so
+shared/lib/qt6/plugins/platforminputcontexts/libibusplatforminputcontextplugin.so
+shared/lib/qt6/plugins/iconengines/libqsvgicon.so
+shared/lib/qt6/plugins/imageformats/libqgif.so
+shared/lib/qt6/plugins/imageformats/libqico.so
+shared/lib/qt6/plugins/imageformats/libqjpeg.so
+shared/lib/qt6/plugins/imageformats/libqsvg.so
+shared/lib/libQt6Svg.so.6.4.2
+etc/fonts/fonts.conf
+shared/lib/qt6/plugins/wayland-shell-integration/libfullscreen-shell-v1.so
+shared/lib/qt6/plugins/wayland-shell-integration/libivi-shell.so
+shared/lib/qt6/plugins/wayland-shell-integration/libqt-shell.so
+shared/lib/qt6/plugins/wayland-shell-integration/libwl-shell-plugin.so
+shared/lib/qt6/plugins/wayland-shell-integration/libxdg-shell.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libdmabuf-server.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libdrm-egl-server.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libqt-plugin-wayland-egl.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libshm-emulation-server.so
+shared/lib/qt6/plugins/wayland-graphics-integration-client/libvulkan-server.so
+shared/lib/libQt6WaylandEglClientHwIntegration.so.6.4.2
+shared/lib/libQt6OpenGL.so.6.4.2
+share/glvnd/egl_vendor.d/50_mesa.json
+shared/lib/libEGL_mesa.so.0.0.0
+shared/lib/libgbm.so.1.0.0
+shared/lib/libglapi.so.0.0.0
+shared/lib/libxcb-dri2.so.0.0.0
+shared/lib/libwayland-server.so.0.21.0
+shared/lib/dri/swrast_dri.so
+shared/lib/libsensors.so.5.0.0
+shared/lib/libdrm_radeon.so.1.0.1
+shared/lib/libdrm_nouveau.so.2.0.0
+shared/lib/libdrm_intel.so.1.0.0
+shared/lib/libpciaccess.so.0.11.1
+shared/lib/qt6/plugins/wayland-decoration-client/libbradient.so
+shared/lib/gtk-3.0/modules/libcanberra-gtk3-module.so
+shared/lib/libcanberra-gtk3.so.0.1.9
+shared/lib/libcanberra.so.0.2.5
+shared/lib/libvorbisfile.so.3.3.8
+shared/lib/libtdb.so.1.4.8
+shared/lib/libltdl.so.7.3.2
+shared/lib/libXss.so.1.0.0
@@ -0,0 +1,153 @@
+#!/bin/sh -e
+
+# SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# This script assumes you're in the source directory
+
+export APPIMAGE_EXTRACT_AND_RUN=1
+export BASE_ARCH="$(uname -m)"
+
+SHARUN="https://github.com/VHSgunzo/sharun/releases/latest/download/sharun-${BASE_ARCH}-aio"
+URUNTIME="https://github.com/VHSgunzo/uruntime/releases/latest/download/uruntime-appimage-dwarfs-${BASE_ARCH}"
+
+case "$1" in
+    amd64|"")
+        echo "Packaging amd64-v3 optimized build of Eden"
+        ARCH="amd64_v3"
+        ;;
+    steamdeck|zen2)
+        echo "Packaging Steam Deck (Zen 2) optimized build of Eden"
+        ARCH="steamdeck"
+        ;;
+    rog-ally|allyx|zen4)
+        echo "Packaging ROG Ally X (Zen 4) optimized build of Eden"
+        ARCH="rog-ally-x"
+        ;;
+    legacy)
+        echo "Packaging amd64 generic build of Eden"
+        ARCH=amd64
+        ;;
+    aarch64)
+        echo "Packaging armv8-a build of Eden"
+        ARCH=aarch64
+        ;;
+    armv9)
+        echo "Packaging armv9-a build of Eden"
+        ARCH=armv9
+        ;;
+		native)
+        echo "Packaging native build of Eden"
+        ARCH="$BASE_ARCH"
+        ;;
+
+esac
+
+export BUILDDIR="$2"
+
+if [ "$BUILDDIR" = '' ]
+then
+	BUILDDIR=build
+fi
+
+EDEN_TAG=$(git describe --tags --abbrev=0)
+echo "Making \"$EDEN_TAG\" build"
+# git checkout "$EDEN_TAG"
+VERSION="$(echo "$EDEN_TAG")"
+
+# NOW MAKE APPIMAGE
+mkdir -p ./AppDir
+cd ./AppDir
+
+cp ../dist/dev.eden_emu.eden.desktop .
+cp ../dist/dev.eden_emu.eden.svg .
+
+ln -sf ./dev.eden_emu.eden.svg ./.DirIcon
+
+UPINFO='gh-releases-zsync|eden-emulator|Releases|latest|*.AppImage.zsync'
+
+if [ "$DEVEL" = 'true' ]; then
+	sed -i 's|Name=Eden|Name=Eden Nightly|' ./dev.eden_emu.eden.desktop
+ 	UPINFO="$(echo "$UPINFO" | sed 's|Releases|nightly|')"
+fi
+
+LIBDIR="/usr/lib"
+
+# Workaround for Gentoo
+if [ ! -d "$LIBDIR/qt6" ]
+then
+	LIBDIR="/usr/lib64"
+fi
+
+# Workaround for Debian
+if [ ! -d "$LIBDIR/qt6" ]
+then
+    LIBDIR="/usr/lib/${BASE_ARCH}-linux-gnu"
+fi
+
+# Bundle all libs
+
+wget --retry-connrefused --tries=30 "$SHARUN" -O ./sharun-aio
+chmod +x ./sharun-aio
+xvfb-run -a ./sharun-aio l -p -v -e -s -k \
+	../$BUILDDIR/bin/eden* \
+	$LIBDIR/lib*GL*.so* \
+	$LIBDIR/dri/* \
+	$LIBDIR/vdpau/* \
+	$LIBDIR/libvulkan* \
+	$LIBDIR/libXss.so* \
+	$LIBDIR/libdecor-0.so* \
+	$LIBDIR/libgamemode.so* \
+	$LIBDIR/qt6/plugins/audio/* \
+	$LIBDIR/qt6/plugins/bearer/* \
+	$LIBDIR/qt6/plugins/imageformats/* \
+	$LIBDIR/qt6/plugins/iconengines/* \
+	$LIBDIR/qt6/plugins/platforms/* \
+	$LIBDIR/qt6/plugins/platformthemes/* \
+	$LIBDIR/qt6/plugins/platforminputcontexts/* \
+	$LIBDIR/qt6/plugins/styles/* \
+	$LIBDIR/qt6/plugins/xcbglintegrations/* \
+	$LIBDIR/qt6/plugins/wayland-*/* \
+	$LIBDIR/pulseaudio/* \
+	$LIBDIR/pipewire-0.3/* \
+	$LIBDIR/spa-0.2/*/* \
+	$LIBDIR/alsa-lib/*
+
+rm -f ./sharun-aio
+
+# Prepare sharun
+if [ "$ARCH" = 'aarch64' ]; then
+	# allow the host vulkan to be used for aarch64 given the sad situation
+	echo 'SHARUN_ALLOW_SYS_VKICD=1' > ./.env
+fi
+
+# Workaround for Gentoo
+if [ -d "shared/libproxy" ]; then
+	cp shared/libproxy/* lib/
+fi
+
+ln -f ./sharun ./AppRun
+./sharun -g
+
+# turn appdir into appimage
+cd ..
+wget -q "$URUNTIME" -O ./uruntime
+chmod +x ./uruntime
+
+#Add udpate info to runtime
+echo "Adding update information \"$UPINFO\" to runtime..."
+./uruntime --appimage-addupdinfo "$UPINFO"
+
+echo "Generating AppImage..."
+./uruntime --appimage-mkdwarfs -f \
+	--set-owner 0 --set-group 0 \
+	--no-history --no-create-timestamp \
+	--categorize=hotness --hotness-list=.ci/linux/eden.dwfsprof \
+	--compression zstd:level=22 -S26 -B32 \
+	--header uruntime \
+    -N 4 \
+	-i ./AppDir -o Eden-"$VERSION"-"$ARCH".AppImage
+
+echo "Generating zsync file..."
+zsyncmake *.AppImage -u *.AppImage
+echo "All Done!"
@@ -0,0 +1,51 @@
+#!/bin/bash -ex
+
+# SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+if [ "$COMPILER" == "clang" ]
+then
+    EXTRA_CMAKE_FLAGS+=(
+        -DCMAKE_CXX_COMPILER=clang-cl
+        -DCMAKE_C_COMPILER=clang-cl
+        -DCMAKE_CXX_FLAGS="-O3"
+        -DCMAKE_C_FLAGS="-O3"
+    )
+
+    BUILD_TYPE="RelWithDebInfo"
+fi
+
+[ -z "$WINDEPLOYQT" ] && { echo "WINDEPLOYQT environment variable required."; exit 1; }
+
+echo $EXTRA_CMAKE_FLAGS
+
+mkdir -p build && cd build
+cmake .. -G Ninja \
+    -DCMAKE_BUILD_TYPE="${BUILD_TYPE:-Release}" \
+	-DENABLE_QT_TRANSLATION=ON \
+    -DUSE_DISCORD_PRESENCE=ON \
+    -DYUZU_USE_BUNDLED_SDL2=ON \
+    -DBUILD_TESTING=OFF \
+    -DYUZU_TESTS=OFF \
+    -DDYNARMIC_TESTS=OFF \
+    -DYUZU_CMD=OFF \
+    -DYUZU_ROOM_STANDALONE=OFF \
+    -DYUZU_USE_QT_MULTIMEDIA=${USE_MULTIMEDIA:-false} \
+    -DYUZU_USE_QT_WEB_ENGINE=${USE_WEBENGINE:-false} \
+    -DENABLE_LTO=ON \
+	-DCMAKE_EXE_LINKER_FLAGS=" /LTCG" \
+    -DYUZU_USE_BUNDLED_QT=${BUNDLE_QT:-false} \
+    -DUSE_CCACHE=${CCACHE:-false}  \
+    -DENABLE_UPDATE_CHECKER=${DEVEL:-true} \
+    "${EXTRA_CMAKE_FLAGS[@]}" \
+    "$@"
+
+ninja
+
+set +e
+rm -f bin/*.pdb
+set -e
+
+$WINDEPLOYQT --release --no-compiler-runtime --no-opengl-sw --no-system-dxc-compiler --no-system-d3d-compiler --dir pkg bin/eden.exe
+
+cp bin/* pkg
@@ -0,0 +1,18 @@
+GITDATE=$(git show -s --date=short --format='%ad' | tr -d "-")
+GITREV=$(git show -s --format='%h')
+
+ZIP_NAME="Eden-Windows-${ARCH}-${GITDATE}-${GITREV}.zip"
+
+ARTIFACTS_DIR="artifacts"
+PKG_DIR="build/pkg"
+
+mkdir -p "$ARTIFACTS_DIR"
+
+TMP_DIR=$(mktemp -d)
+
+cp -r "$PKG_DIR"/* "$TMP_DIR"/
+cp LICENSE* README* "$TMP_DIR"/
+
+7z a -tzip "$ARTIFACTS_DIR/$ZIP_NAME" "$TMP_DIR"/*
+
+rm -rf "$TMP_DIR"
@@ -169,31 +169,6 @@ if (MSVC AND NOT CXX_CLANG)
    set(CMAKE_CXX_FLAGS_INIT "${CMAKE_CXX_FLAGS_INIT} /W3 /WX-")
 endif()

-# Set runtime library to MD/MDd for all configurations
-if(MSVC)
-    if (YUZU_USE_BUNDLED_QT AND ARCHITECTURE_arm64)
-        set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>")
-        set(libflag MT)
-    else()
-        set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>DLL")
-        set(libflag MD)
-    endif()
-
-    # Force all projects (including external dependencies) to use the same runtime
-    set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /${libflag}")
-    set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /${libflag}d")
-    set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /${libflag}")
-    set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /${libflag}d")
-
-    # Add this to ensure Cubeb uses the same runtime
-    add_compile_options(
-        $<$<COMPILE_LANGUAGE:C,CXX>:$<$<CONFIG:Debug>:/${libflag}d>>
-        $<$<COMPILE_LANGUAGE:C,CXX>:$<$<CONFIG:Release>:/${libflag}>>
-        $<$<COMPILE_LANGUAGE:C,CXX>:$<$<CONFIG:RelWithDebInfo>:/${libflag}>>
-        $<$<COMPILE_LANGUAGE:C,CXX>:$<$<CONFIG:MinSizeRel>:/${libflag}>>
-    )
-endif()
-
 # TODO(crueter): Cleanup, each dep that has a bundled option should allow to choose between bundled, external, system
 cmake_dependent_option(YUZU_USE_EXTERNAL_SDL2 "Build SDL2 from external source" OFF "NOT MSVC;NOT ANDROID" OFF)
 cmake_dependent_option(YUZU_USE_BUNDLED_SDL2 "Download bundled SDL2 build" "${MSVC}" "NOT ANDROID" OFF)
@@ -713,6 +688,25 @@ if (MSVC AND CXX_CLANG)
    link_libraries(llvm-mingw-runtime)
 endif()

+# Set runtime library to MD/MDd for all configurations
+if(MSVC)
+    set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>DLL")
+
+    # Force all projects (including external dependencies) to use the same runtime
+    set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /MD")
+    set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /MDd")
+    set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /MD")
+    set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MDd")
+
+    # Add this to ensure Cubeb uses the same runtime
+    add_compile_options(
+        $<$<CONFIG:Debug>:/MDd>
+        $<$<CONFIG:Release>:/MD>
+        $<$<CONFIG:RelWithDebInfo>:/MD>
+        $<$<CONFIG:MinSizeRel>:/MD>
+    )
+endif()
+
 add_subdirectory(src)

 # Set yuzu project or yuzu-cmd project as default StartUp Project in Visual Studio depending on whether QT is enabled or not
@@ -6,8 +6,8 @@
   viewBox="0 0 512 512"
   version="1.1"
   id="svg7"
-   sodipodi:docname="1stanni.svg"
-   inkscape:version="1.4.3 (0d15f75042, 2025-12-25)"
+   sodipodi:docname="base.svg.2026_01_12_14_43_47.0.svg"
+   inkscape:version="1.4.2 (ebf0e94, 2025-05-08)"
   inkscape:export-filename="base.svg.2026_01_12_14_43_47.0.svg"
   inkscape:export-xdpi="96"
   inkscape:export-ydpi="96"
@@ -19,34 +19,36 @@
  <defs
     id="defs7">
    <linearGradient
-       id="linearGradient34"
+       id="linearGradient1"
       inkscape:collect="always">
      <stop
-         style="stop-color:#ffd700;stop-opacity:1;"
+         style="stop-color:#ff2e88;stop-opacity:0.5;"
         offset="0"
-         id="stop34" />
+         id="stop3" />
      <stop
-         style="stop-color:#ffd700;stop-opacity:0.48031053;"
-         offset="1"
-         id="stop35" />
+         style="stop-color:#bf42f6;stop-opacity:0.5;"
+         offset="0.44631511"
+         id="stop4" />
+      <stop
+         style="stop-color:#5da5ed;stop-opacity:0.5;"
+         offset="0.90088946"
+         id="stop2" />
    </linearGradient>
-    <rect
-       x="20.999999"
-       y="287.30493"
-       width="487.07235"
-       height="134.69506"
-       id="rect22" />
    <linearGradient
-       id="linearGradient21"
+       id="linearGradient138"
       inkscape:collect="always">
      <stop
-         style="stop-color:#3a0057;stop-opacity:1;"
+         style="stop-color:#ff2e88;stop-opacity:1;"
         offset="0"
-         id="stop21" />
+         id="stop152" />
      <stop
-         style="stop-color:#830091;stop-opacity:1;"
-         offset="1"
-         id="stop22" />
+         style="stop-color:#bf42f6;stop-opacity:1;"
+         offset="0.44971901"
+         id="stop137" />
+      <stop
+         style="stop-color:#5da5ed;stop-opacity:1;"
+         offset="0.89793283"
+         id="stop138" />
    </linearGradient>
    <linearGradient
       id="swatch37"
@@ -114,6 +116,33 @@
       width="521.34025"
       height="248.94868"
       id="rect24" />
+    <linearGradient
+       id="linearGradient11"
+       inkscape:collect="always">
+      <stop
+         style="stop-color:#ff2e88;stop-opacity:1;"
+         offset="0"
+         id="stop11" />
+      <stop
+         style="stop-color:#bf42f6;stop-opacity:1;"
+         offset="0.44971901"
+         id="stop154" />
+      <stop
+         style="stop-color:#5da5ed;stop-opacity:1;"
+         offset="0.89793283"
+         id="stop12" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient138"
+       id="linearGradient6"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.118028,0,0,1.116699,-46.314723,-42.388667)"
+       x1="270.39996"
+       y1="40.000019"
+       x2="270.39996"
+       y2="494.39996"
+       spreadMethod="pad" />
    <clipPath
       clipPathUnits="userSpaceOnUse"
       id="clipPath18">
@@ -136,6 +165,16 @@
         inkscape:label="Circle"
         r="191.89999" />
    </clipPath>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient11"
+       id="linearGradient27"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(-6.9401139e-5,-2.8678628)"
+       x1="256.00012"
+       y1="102.94693"
+       x2="256.00012"
+       y2="409.05307" />
    <clipPath
       clipPathUnits="userSpaceOnUse"
       id="clipPath128">
@@ -148,106 +187,14 @@
    </clipPath>
    <linearGradient
       inkscape:collect="always"
-       xlink:href="#linearGradient21"
-       id="linearGradient22"
+       xlink:href="#linearGradient1"
+       id="linearGradient2"
       x1="256"
-       y1="0"
+       y1="64"
       x2="256"
-       y2="512"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34"
-       id="linearGradient35"
-       x1="256"
-       y1="-0.048701428"
-       x2="256"
-       y2="512.04932"
-       gradientUnits="userSpaceOnUse" />
-    <filter
-       inkscape:label="Glowing Bubble"
-       inkscape:menu="Ridges"
-       inkscape:menu-tooltip="Bubble effect with refraction and glow"
-       x="-0.19420711"
-       y="-0.11239541"
-       width="1.3884142"
-       height="1.2247908"
-       style="color-interpolation-filters:sRGB;"
-       id="filter61">
-      <feGaussianBlur
-         stdDeviation="1"
-         result="result1"
-         id="feGaussianBlur56" />
-      <feGaussianBlur
-         stdDeviation="10"
-         result="result6"
-         in="result1"
-         id="feGaussianBlur57" />
-      <feComposite
-         operator="atop"
-         in="result6"
-         in2="result1"
-         result="result8"
-         id="feComposite57" />
-      <feComposite
-         operator="xor"
-         result="fbSourceGraphic"
-         in="result6"
-         in2="result8"
-         id="feComposite58" />
-      <feColorMatrix
-         result="fbSourceGraphicAlpha"
-         in="fbSourceGraphic"
-         values="0 0 0 -1 0 0 0 0 -1 0 0 0 0 -1 0 0 0 0 2 0 "
-         id="feColorMatrix58" />
-      <feGaussianBlur
-         result="result0"
-         in="fbSourceGraphicAlpha"
-         stdDeviation="1"
-         id="feGaussianBlur58" />
-      <feSpecularLighting
-         specularExponent="35"
-         specularConstant="1.5"
-         surfaceScale="-2"
-         lighting-color="rgb(255,255,255)"
-         result="result1"
-         in="result0"
-         id="feSpecularLighting58">
-        <feDistantLight
-           azimuth="230"
-           elevation="60"
-           id="feDistantLight58" />
-      </feSpecularLighting>
-      <feComposite
-         operator="in"
-         result="result2"
-         in="result1"
-         in2="fbSourceGraphicAlpha"
-         id="feComposite59" />
-      <feComposite
-         k3="1.2"
-         k2="1.1"
-         operator="arithmetic"
-         result="result4"
-         in="fbSourceGraphic"
-         in2="result2"
-         id="feComposite60" />
-      <feGaussianBlur
-         result="result80"
-         in="result4"
-         stdDeviation="0.5"
-         id="feGaussianBlur60" />
-      <feComposite
-         operator="atop"
-         in="result9"
-         in2="result80"
-         result="result91"
-         id="feComposite61" />
-      <feBlend
-         mode="multiply"
-         in2="result91"
-         id="feBlend61" />
-    </filter>
+       y2="448"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.3229974,0,0,1.3214002,-82.687336,-82.290326)" />
  </defs>
  <sodipodi:namedview
     id="namedview7"
@@ -258,29 +205,23 @@
     inkscape:pageopacity="0.0"
     inkscape:pagecheckerboard="0"
     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="1"
-     inkscape:cx="213.49999"
-     inkscape:cy="248.99999"
-     inkscape:window-width="1600"
-     inkscape:window-height="849"
-     inkscape:window-x="0"
-     inkscape:window-y="27"
+     inkscape:zoom="1.4142136"
+     inkscape:cx="261.62951"
+     inkscape:cy="230.87036"
+     inkscape:window-width="1920"
+     inkscape:window-height="1008"
+     inkscape:window-x="1080"
+     inkscape:window-y="351"
     inkscape:window-maximized="1"
     inkscape:current-layer="svg7" />
-  <circle
-     style="fill:url(#linearGradient22);fill-opacity:1;stroke:none;stroke-width:8"
-     id="path21"
-     cx="256"
-     cy="256"
-     r="256" />
  <path
     id="path8-7"
-     style="display:inline;mix-blend-mode:normal;fill:url(#linearGradient35);fill-opacity:1;fill-rule:nonzero;stroke:#320081;stroke-width:4.067;stroke-dasharray:none;stroke-opacity:1;paint-order:stroke fill markers"
+     style="display:inline;mix-blend-mode:multiply;fill:url(#linearGradient6);fill-opacity:1;fill-rule:nonzero;stroke:url(#linearGradient2);stroke-width:3.9666;stroke-dasharray:none;stroke-opacity:0.566238;paint-order:stroke fill markers"
     inkscape:label="Circle"
     d="M 256,2.2792898 A 254.0155,253.71401 0 0 0 150.68475,25.115202 c 19.54414,1.070775 38.74692,5.250294 51.56848,11.647658 14.14361,7.056691 28.63804,19.185961 39.4212,29.347551 h 40.60981 c 1.03847,-0.68139 2.10297,-1.36938 3.1938,-2.05957 5.45602,-15.78533 14.79164,-43.183497 19.49612,-57.0097682 A 254.0155,253.71401 0 0 0 256,2.2792898 Z m 61.57106,7.567234 -18.26098,46.1544672 c 7.79702,-4.13918 16.35655,-7.87447 25.20671,-10.87081 23.1229,-7.828433 43.96931,-10.170904 54.94058,-10.868226 A 254.0155,253.71401 0 0 0 317.57106,9.8465238 Z m 65.39277,26.4001532 c -9.68256,4.806644 -33.05532,16.642034 -55.68217,29.863734 H 424.4677 A 254.0155,253.71401 0 0 0 382.96383,36.246677 Z M 113.90698,45.690231 A 254.0155,253.71401 0 0 0 87.532302,66.110411 H 194.2739 c -1.47402,-0.80231 -2.35141,-1.25949 -2.35141,-1.25949 l 10.4496,-11.83348 -38.40568,7.01234 c 0,1e-5 -12.21537,-4.60266 -40.17313,-12.27223 -3.45336,-0.94731 -6.75329,-1.61824 -9.8863,-2.06732 z m -36.803618,30.18635 a 254.0155,253.71401 0 0 0 -34.88372,43.090929 h 59.976738 c 18.11461,-12.04145 40.14252,-22.882149 62.31266,-24.534159 52.93006,-3.9444 70.16538,1.86342 70.16538,1.86342 0,0 -4.612,-4.8206 -14.51938,-13.36656 -2.72366,-2.34942 -6.0844,-4.77373 -9.52455,-7.05363 z m 174.472868,0 c 4.57322,4.7186 7.29716,7.83565 7.29716,7.83565 0,0 3.53501,-3.18484 9.62532,-7.83565 z m 60.27649,0 c -21.56573,15.45339 -25.4703,27.979669 -25.4703,27.979669 0,0 54.83326,-19.215729 100.70543,-0.31228 11.63986,4.79661 21.58481,10.13159 29.94832,15.42354 h 52.74419 A 254.0155,253.71401 0 0 0 434.89664,75.876581 Z M 36.250648,128.73367 A 254.0155,253.71401 0 0 0 16.372095,171.82459 H 147.45478 c 1.45695,-2.5815 3.06539,-5.08648 4.83979,-7.48982 14.23694,-19.28301 27.92088,-30.0088 36.86047,-35.6011 h -30.25323 c -5.87346,0.93472 -12.04945,1.99094 -18.28166,3.16937 -30.12936,5.69727 -81.157618,22.78945 -81.157618,22.78945 0,0 11.47125,-12.39249 29.11369,-25.95882 z m 265.630492,0 c 33.48676,11.2434 52.42799,26.78443 62.7752,43.09092 h 130.97157 a 254.0155,253.71401 0 0 0 -19.87856,-43.09092 h -44.81136 c 14.85233,11.5863 21.59948,20.9854 21.59948,20.9854 0,0 -33.5226,-12.37087 -66.0646,-20.9854 z m -45.96641,16.27007 c -1.00419,0.0106 -10.12705,0.72026 -44.98966,20.64729 -3.12132,1.78406 -6.25434,3.86182 -9.37468,6.17356 h 41.81911 c 7.17181,-17.34774 12.64083,-26.82085 12.64083,-26.82085 0,0 -0.0287,-7.1e-4 -0.0957,0 z m 14.18088,0.0465 c 0,0 -3.31228,9.32762 -7.30492,26.77438 h 51.78554 C 287.6577,146.14158 270.09561,145.0502 270.09561,145.0502 Z M 13.152456,181.59075 A 254.0155,253.71401 0 0 0 3.927651,224.68167 H 134.1447 c 0.56161,-12.72411 2.67825,-28.50188 8.61499,-43.09092 z m 176.661504,0 c -14.27121,13.10564 -27.60733,29.58761 -37.56073,43.09092 h 73.3721 c 4.47018,-16.79061 9.35068,-31.26371 13.86562,-43.09092 z m 70.85787,0 c -2.41384,11.76417 -4.9032,26.20707 -6.94831,43.09092 H 360.4832 c -8.32133,-10.88917 -20.66988,-26.17008 -36.35141,-43.09092 z m 109.17313,0 c 6.63611,15.24089 6.92441,30.5373 5.57882,43.09092 h 132.64857 a 254.0155,253.71401 0 0 0 -9.22481,-43.09092 z M 2.90181,234.44783 A 254.0155,253.71401 0 0 0 1.984498,255.9933 254.0155,253.71401 0 0 0 2.90181,277.53876 h 211.89923 c 2.25762,-15.52555 5.14325,-29.93448 8.3385,-43.09093 h -77.8863 c -6.46396,9.27617 -10.33076,15.56549 -10.33076,15.56549 0,0 -0.82623,-6.14945 -0.9354,-15.56549 z m 249.72093,0 c -1.3692,13.09684 -2.4456,27.49209 -3.02068,43.09093 h 259.49613 a 254.0155,253.71401 0 0 0 0.91731,-21.54546 254.0155,253.71401 0 0 0 -0.91731,-21.54547 H 374.02584 c -0.445,2.5469 -0.90878,4.89768 -1.32817,7.01751 0,0 -1.69726,-2.53821 -4.94056,-7.01751 z M 3.927651,287.30493 a 254.0155,253.71401 0 0 0 9.224805,43.09091 H 214.04393 c -1.29238,-15.40742 -1.57503,-30.04388 -0.41861,-43.09091 z m 245.385009,0 c -0.30355,13.54349 -0.22032,27.92598 0.36951,43.09091 h 249.16537 a 254.0155,253.71401 0 0 0 9.22481,-43.09091 z M 16.369511,340.16201 a 254.0155,253.71401 0 0 0 19.878554,43.09091 H 221.4677 c -2.69781,-14.4523 -4.96108,-29.01285 -6.4832,-43.09091 z m 233.842379,0 c 1.15864,15.47765 3.81286,29.83979 7.51679,43.09091 h 218.02325 a 254.0155,253.71401 0 0 0 19.87856,-43.09091 z M 42.217052,393.01909 a 254.0155,253.71401 0 0 0 34.88372,43.09093 H 233.09561 c -3.40902,-13.67281 -6.76794,-28.2531 -9.73902,-43.09093 z m 218.490958,0 c 5.34985,16.15926 12.22007,30.51982 19.68733,43.09093 h 154.50389 a 254.0155,253.71401 0 0 0 34.88371,-43.09093 z M 87.529722,445.87618 a 254.0155,253.71401 0 0 0 166.229968,63.8208 c -3.67805,-12.0825 -10.85464,-35.49828 -18.18088,-63.8208 z m 199.010328,0 c 17.5887,26.43772 36.99259,43.60598 47.33592,51.61309 a 254.0155,253.71401 0 0 0 90.59431,-51.61309 z" />
  <path
     id="path27"
-     style="display:inline;mix-blend-mode:multiply;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:3;stroke-linejoin:round;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers"
+     style="display:inline;mix-blend-mode:multiply;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient27);stroke-width:3;stroke-linejoin:round;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers"
     d="m 318.98012,441.7375 c -9.87518,-6.73978 -64.39137,-49.0272 -67.68975,-127.81978 -3.69298,-88.21893 15.36468,-141.91029 15.36468,-141.91029 0,0 16.00378,0.99513 39.80316,26.53195 23.79939,25.53753 37.74965,46.43102 37.74965,46.43102 3.91262,-19.79992 12.84563,-66.32402 -60.72865,-87.55523 0,0 12.82326,-5.38883 39.3925,-3.81382 26.56907,1.57572 81.6822,21.93799 81.6822,21.93799 0,0 -14.79766,-20.63773 -49.47063,-34.94295 -34.67291,-14.30533 -76.1182,0.23644 -76.1182,0.23644 0,0 3.86959,-12.43127 27.22669,-26.38478 23.35718,-13.9537 49.27409,-26.501533 49.27409,-26.501533 0,0 -21.97854,-0.26548 -47.67725,8.44535 -6.68948,2.267506 -13.15863,5.094213 -19.05208,8.226563 l 16.05803,-40.634103 -4.4617,-1.89059 -5.1305,-0.95965 c 0,0 -11.24072,33.12428 -16.92051,49.576513 -12.13137,7.68489 -20.11005,14.87735 -20.11005,14.87735 0,0 -21.90573,-25.09227 -42.79668,-35.527803 -26.03412,-13.00525 -86.88249,-13.90359 -94.0044,10.401173 0,0 13.56804,-7.884703 34.70032,-2.080917 21.13214,5.803997 30.3644,9.287307 30.3644,9.287307 l 29.02989,-5.30681 -7.89811,8.95527 c 0,0 13.8496,7.21324 21.33822,13.68063 7.48859,6.46722 10.9757,10.11472 10.9757,10.11472 0,0 -13.02739,-4.39388 -53.03507,-1.40893 -40.00771,2.98473 -79.40016,45.60209 -79.40016,45.60209 0,0 38.57037,-12.93531 61.34393,-17.24677 22.77354,-4.31126 44.52166,-6.46757 44.52166,-6.46757 0,0 -17.23298,5.97003 -35.69792,31.00932 -18.46522,25.03987 -13.13146,64.83866 -13.13146,64.83866 0,0 29.33874,-47.7577 57.44675,-63.84249 28.10798,-16.08527 34.0799,-15.6238 34.0799,-15.6238 0,0 -22.56785,39.13486 -31.39017,101.98268 -8.03005,57.2039 26.77689,163.75449 31.1572,178.89699"
     sodipodi:nodetypes="cscsccscscscsccccccscscccscscscscscsc"
     inkscape:label="MainOutline"
@@ -1,289 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="512"
-   height="512"
-   fill="none"
-   viewBox="0 0 512 512"
-   version="1.1"
-   id="svg7"
-   sodipodi:docname="1stanni.svg"
-   inkscape:version="1.4.3 (0d15f75042, 2025-12-25)"
-   inkscape:export-filename="base.svg.2026_01_12_14_43_47.0.svg"
-   inkscape:export-xdpi="96"
-   inkscape:export-ydpi="96"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg">
-  <defs
-     id="defs7">
-    <linearGradient
-       id="linearGradient34"
-       inkscape:collect="always">
-      <stop
-         style="stop-color:#ffd700;stop-opacity:1;"
-         offset="0"
-         id="stop34" />
-      <stop
-         style="stop-color:#ffd700;stop-opacity:0.48031053;"
-         offset="1"
-         id="stop35" />
-    </linearGradient>
-    <rect
-       x="20.999999"
-       y="287.30493"
-       width="487.07235"
-       height="134.69506"
-       id="rect22" />
-    <linearGradient
-       id="linearGradient21"
-       inkscape:collect="always">
-      <stop
-         style="stop-color:#3a0057;stop-opacity:1;"
-         offset="0"
-         id="stop21" />
-      <stop
-         style="stop-color:#830091;stop-opacity:1;"
-         offset="1"
-         id="stop22" />
-    </linearGradient>
-    <linearGradient
-       id="swatch37"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop37" />
-    </linearGradient>
-    <linearGradient
-       id="swatch28"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#252525;stop-opacity:1;"
-         offset="0"
-         id="stop28" />
-    </linearGradient>
-    <linearGradient
-       id="swatch27"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="0"
-         id="stop27" />
-    </linearGradient>
-    <linearGradient
-       id="swatch15"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop16" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient14"
-       inkscape:swatch="gradient">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop14" />
-      <stop
-         style="stop-color:#ffffff;stop-opacity:0;"
-         offset="1"
-         id="stop15" />
-    </linearGradient>
-    <linearGradient
-       id="swatch9"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop10" />
-    </linearGradient>
-    <linearGradient
-       id="swatch8"
-       inkscape:swatch="solid">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop9" />
-    </linearGradient>
-    <rect
-       x="22.627417"
-       y="402.76802"
-       width="521.34025"
-       height="248.94868"
-       id="rect24" />
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath18">
-      <circle
-         style="opacity:1;mix-blend-mode:normal;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:10.8382;stroke-opacity:0.566238;paint-order:stroke fill markers"
-         id="circle18"
-         cx="-246.8315"
-         cy="246.8338"
-         inkscape:label="Circle"
-         r="191.89999" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath22">
-      <circle
-         style="opacity:1;mix-blend-mode:normal;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:10.8382;stroke-opacity:0.566238;paint-order:stroke fill markers"
-         id="circle22"
-         cx="256"
-         cy="256"
-         inkscape:label="Circle"
-         r="191.89999" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath128">
-      <circle
-         style="fill:none;fill-opacity:1;stroke:#03ffff;stroke-width:0;stroke-dasharray:none;stroke-opacity:1"
-         id="circle128"
-         cx="256"
-         cy="256"
-         r="192" />
-    </clipPath>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient21"
-       id="linearGradient22"
-       x1="256"
-       y1="0"
-       x2="256"
-       y2="512"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient34"
-       id="linearGradient35"
-       x1="256"
-       y1="-0.048701428"
-       x2="256"
-       y2="512.04932"
-       gradientUnits="userSpaceOnUse" />
-    <filter
-       inkscape:label="Glowing Bubble"
-       inkscape:menu="Ridges"
-       inkscape:menu-tooltip="Bubble effect with refraction and glow"
-       x="-0.19420711"
-       y="-0.11239541"
-       width="1.3884142"
-       height="1.2247908"
-       style="color-interpolation-filters:sRGB;"
-       id="filter61">
-      <feGaussianBlur
-         stdDeviation="1"
-         result="result1"
-         id="feGaussianBlur56" />
-      <feGaussianBlur
-         stdDeviation="10"
-         result="result6"
-         in="result1"
-         id="feGaussianBlur57" />
-      <feComposite
-         operator="atop"
-         in="result6"
-         in2="result1"
-         result="result8"
-         id="feComposite57" />
-      <feComposite
-         operator="xor"
-         result="fbSourceGraphic"
-         in="result6"
-         in2="result8"
-         id="feComposite58" />
-      <feColorMatrix
-         result="fbSourceGraphicAlpha"
-         in="fbSourceGraphic"
-         values="0 0 0 -1 0 0 0 0 -1 0 0 0 0 -1 0 0 0 0 2 0 "
-         id="feColorMatrix58" />
-      <feGaussianBlur
-         result="result0"
-         in="fbSourceGraphicAlpha"
-         stdDeviation="1"
-         id="feGaussianBlur58" />
-      <feSpecularLighting
-         specularExponent="35"
-         specularConstant="1.5"
-         surfaceScale="-2"
-         lighting-color="rgb(255,255,255)"
-         result="result1"
-         in="result0"
-         id="feSpecularLighting58">
-        <feDistantLight
-           azimuth="230"
-           elevation="60"
-           id="feDistantLight58" />
-      </feSpecularLighting>
-      <feComposite
-         operator="in"
-         result="result2"
-         in="result1"
-         in2="fbSourceGraphicAlpha"
-         id="feComposite59" />
-      <feComposite
-         k3="1.2"
-         k2="1.1"
-         operator="arithmetic"
-         result="result4"
-         in="fbSourceGraphic"
-         in2="result2"
-         id="feComposite60" />
-      <feGaussianBlur
-         result="result80"
-         in="result4"
-         stdDeviation="0.5"
-         id="feGaussianBlur60" />
-      <feComposite
-         operator="atop"
-         in="result9"
-         in2="result80"
-         result="result91"
-         id="feComposite61" />
-      <feBlend
-         mode="multiply"
-         in2="result91"
-         id="feBlend61" />
-    </filter>
-  </defs>
-  <sodipodi:namedview
-     id="namedview7"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="1"
-     inkscape:cx="213.49999"
-     inkscape:cy="248.99999"
-     inkscape:window-width="1600"
-     inkscape:window-height="849"
-     inkscape:window-x="0"
-     inkscape:window-y="27"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg7" />
-  <circle
-     style="fill:url(#linearGradient22);fill-opacity:1;stroke:none;stroke-width:8"
-     id="path21"
-     cx="256"
-     cy="256"
-     r="256" />
-  <path
-     id="path8-7"
-     style="display:inline;mix-blend-mode:normal;fill:url(#linearGradient35);fill-opacity:1;fill-rule:nonzero;stroke:#320081;stroke-width:4.067;stroke-dasharray:none;stroke-opacity:1;paint-order:stroke fill markers"
-     inkscape:label="Circle"
-     d="M 256,2.2792898 A 254.0155,253.71401 0 0 0 150.68475,25.115202 c 19.54414,1.070775 38.74692,5.250294 51.56848,11.647658 14.14361,7.056691 28.63804,19.185961 39.4212,29.347551 h 40.60981 c 1.03847,-0.68139 2.10297,-1.36938 3.1938,-2.05957 5.45602,-15.78533 14.79164,-43.183497 19.49612,-57.0097682 A 254.0155,253.71401 0 0 0 256,2.2792898 Z m 61.57106,7.567234 -18.26098,46.1544672 c 7.79702,-4.13918 16.35655,-7.87447 25.20671,-10.87081 23.1229,-7.828433 43.96931,-10.170904 54.94058,-10.868226 A 254.0155,253.71401 0 0 0 317.57106,9.8465238 Z m 65.39277,26.4001532 c -9.68256,4.806644 -33.05532,16.642034 -55.68217,29.863734 H 424.4677 A 254.0155,253.71401 0 0 0 382.96383,36.246677 Z M 113.90698,45.690231 A 254.0155,253.71401 0 0 0 87.532302,66.110411 H 194.2739 c -1.47402,-0.80231 -2.35141,-1.25949 -2.35141,-1.25949 l 10.4496,-11.83348 -38.40568,7.01234 c 0,1e-5 -12.21537,-4.60266 -40.17313,-12.27223 -3.45336,-0.94731 -6.75329,-1.61824 -9.8863,-2.06732 z m -36.803618,30.18635 a 254.0155,253.71401 0 0 0 -34.88372,43.090929 h 59.976738 c 18.11461,-12.04145 40.14252,-22.882149 62.31266,-24.534159 52.93006,-3.9444 70.16538,1.86342 70.16538,1.86342 0,0 -4.612,-4.8206 -14.51938,-13.36656 -2.72366,-2.34942 -6.0844,-4.77373 -9.52455,-7.05363 z m 174.472868,0 c 4.57322,4.7186 7.29716,7.83565 7.29716,7.83565 0,0 3.53501,-3.18484 9.62532,-7.83565 z m 60.27649,0 c -21.56573,15.45339 -25.4703,27.979669 -25.4703,27.979669 0,0 54.83326,-19.215729 100.70543,-0.31228 11.63986,4.79661 21.58481,10.13159 29.94832,15.42354 h 52.74419 A 254.0155,253.71401 0 0 0 434.89664,75.876581 Z M 36.250648,128.73367 A 254.0155,253.71401 0 0 0 16.372095,171.82459 H 147.45478 c 1.45695,-2.5815 3.06539,-5.08648 4.83979,-7.48982 14.23694,-19.28301 27.92088,-30.0088 36.86047,-35.6011 h -30.25323 c -5.87346,0.93472 -12.04945,1.99094 -18.28166,3.16937 -30.12936,5.69727 -81.157618,22.78945 -81.157618,22.78945 0,0 11.47125,-12.39249 29.11369,-25.95882 z m 265.630492,0 c 33.48676,11.2434 52.42799,26.78443 62.7752,43.09092 h 130.97157 a 254.0155,253.71401 0 0 0 -19.87856,-43.09092 h -44.81136 c 14.85233,11.5863 21.59948,20.9854 21.59948,20.9854 0,0 -33.5226,-12.37087 -66.0646,-20.9854 z m -45.96641,16.27007 c -1.00419,0.0106 -10.12705,0.72026 -44.98966,20.64729 -3.12132,1.78406 -6.25434,3.86182 -9.37468,6.17356 h 41.81911 c 7.17181,-17.34774 12.64083,-26.82085 12.64083,-26.82085 0,0 -0.0287,-7.1e-4 -0.0957,0 z m 14.18088,0.0465 c 0,0 -3.31228,9.32762 -7.30492,26.77438 h 51.78554 C 287.6577,146.14158 270.09561,145.0502 270.09561,145.0502 Z M 13.152456,181.59075 A 254.0155,253.71401 0 0 0 3.927651,224.68167 H 134.1447 c 0.56161,-12.72411 2.67825,-28.50188 8.61499,-43.09092 z m 176.661504,0 c -14.27121,13.10564 -27.60733,29.58761 -37.56073,43.09092 h 73.3721 c 4.47018,-16.79061 9.35068,-31.26371 13.86562,-43.09092 z m 70.85787,0 c -2.41384,11.76417 -4.9032,26.20707 -6.94831,43.09092 H 360.4832 c -8.32133,-10.88917 -20.66988,-26.17008 -36.35141,-43.09092 z m 109.17313,0 c 6.63611,15.24089 6.92441,30.5373 5.57882,43.09092 h 132.64857 a 254.0155,253.71401 0 0 0 -9.22481,-43.09092 z M 2.90181,234.44783 A 254.0155,253.71401 0 0 0 1.984498,255.9933 254.0155,253.71401 0 0 0 2.90181,277.53876 h 211.89923 c 2.25762,-15.52555 5.14325,-29.93448 8.3385,-43.09093 h -77.8863 c -6.46396,9.27617 -10.33076,15.56549 -10.33076,15.56549 0,0 -0.82623,-6.14945 -0.9354,-15.56549 z m 249.72093,0 c -1.3692,13.09684 -2.4456,27.49209 -3.02068,43.09093 h 259.49613 a 254.0155,253.71401 0 0 0 0.91731,-21.54546 254.0155,253.71401 0 0 0 -0.91731,-21.54547 H 374.02584 c -0.445,2.5469 -0.90878,4.89768 -1.32817,7.01751 0,0 -1.69726,-2.53821 -4.94056,-7.01751 z M 3.927651,287.30493 a 254.0155,253.71401 0 0 0 9.224805,43.09091 H 214.04393 c -1.29238,-15.40742 -1.57503,-30.04388 -0.41861,-43.09091 z m 245.385009,0 c -0.30355,13.54349 -0.22032,27.92598 0.36951,43.09091 h 249.16537 a 254.0155,253.71401 0 0 0 9.22481,-43.09091 z M 16.369511,340.16201 a 254.0155,253.71401 0 0 0 19.878554,43.09091 H 221.4677 c -2.69781,-14.4523 -4.96108,-29.01285 -6.4832,-43.09091 z m 233.842379,0 c 1.15864,15.47765 3.81286,29.83979 7.51679,43.09091 h 218.02325 a 254.0155,253.71401 0 0 0 19.87856,-43.09091 z M 42.217052,393.01909 a 254.0155,253.71401 0 0 0 34.88372,43.09093 H 233.09561 c -3.40902,-13.67281 -6.76794,-28.2531 -9.73902,-43.09093 z m 218.490958,0 c 5.34985,16.15926 12.22007,30.51982 19.68733,43.09093 h 154.50389 a 254.0155,253.71401 0 0 0 34.88371,-43.09093 z M 87.529722,445.87618 a 254.0155,253.71401 0 0 0 166.229968,63.8208 c -3.67805,-12.0825 -10.85464,-35.49828 -18.18088,-63.8208 z m 199.010328,0 c 17.5887,26.43772 36.99259,43.60598 47.33592,51.61309 a 254.0155,253.71401 0 0 0 90.59431,-51.61309 z" />
-  <path
-     id="path27"
-     style="display:inline;mix-blend-mode:multiply;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:3;stroke-linejoin:round;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers"
-     d="m 318.98012,441.7375 c -9.87518,-6.73978 -64.39137,-49.0272 -67.68975,-127.81978 -3.69298,-88.21893 15.36468,-141.91029 15.36468,-141.91029 0,0 16.00378,0.99513 39.80316,26.53195 23.79939,25.53753 37.74965,46.43102 37.74965,46.43102 3.91262,-19.79992 12.84563,-66.32402 -60.72865,-87.55523 0,0 12.82326,-5.38883 39.3925,-3.81382 26.56907,1.57572 81.6822,21.93799 81.6822,21.93799 0,0 -14.79766,-20.63773 -49.47063,-34.94295 -34.67291,-14.30533 -76.1182,0.23644 -76.1182,0.23644 0,0 3.86959,-12.43127 27.22669,-26.38478 23.35718,-13.9537 49.27409,-26.501533 49.27409,-26.501533 0,0 -21.97854,-0.26548 -47.67725,8.44535 -6.68948,2.267506 -13.15863,5.094213 -19.05208,8.226563 l 16.05803,-40.634103 -4.4617,-1.89059 -5.1305,-0.95965 c 0,0 -11.24072,33.12428 -16.92051,49.576513 -12.13137,7.68489 -20.11005,14.87735 -20.11005,14.87735 0,0 -21.90573,-25.09227 -42.79668,-35.527803 -26.03412,-13.00525 -86.88249,-13.90359 -94.0044,10.401173 0,0 13.56804,-7.884703 34.70032,-2.080917 21.13214,5.803997 30.3644,9.287307 30.3644,9.287307 l 29.02989,-5.30681 -7.89811,8.95527 c 0,0 13.8496,7.21324 21.33822,13.68063 7.48859,6.46722 10.9757,10.11472 10.9757,10.11472 0,0 -13.02739,-4.39388 -53.03507,-1.40893 -40.00771,2.98473 -79.40016,45.60209 -79.40016,45.60209 0,0 38.57037,-12.93531 61.34393,-17.24677 22.77354,-4.31126 44.52166,-6.46757 44.52166,-6.46757 0,0 -17.23298,5.97003 -35.69792,31.00932 -18.46522,25.03987 -13.13146,64.83866 -13.13146,64.83866 0,0 29.33874,-47.7577 57.44675,-63.84249 28.10798,-16.08527 34.0799,-15.6238 34.0799,-15.6238 0,0 -22.56785,39.13486 -31.39017,101.98268 -8.03005,57.2039 26.77689,163.75449 31.1572,178.89699"
-     sodipodi:nodetypes="cscsccscscscsccccccscscccscscscscscsc"
-     inkscape:label="MainOutline"
-     clip-path="url(#clipPath128)"
-     transform="matrix(1.3229974,0,0,1.3214002,-82.687282,-82.278451)" />
-</svg>
@@ -1 +0,0 @@
-#ffd700
@@ -9,7 +9,6 @@ When reporting issues or finding bugs, we often need backtraces, debug logs, or
 If your bug is related to a graphical issue--e.g. mismatched colors, vertex explosions, flickering, etc.--then you are required to include graphical debugging logs in your issue reports.

 Graphics Debugging is found in General -> Debug on desktop, and Advanced Settings -> Debug on Android. Android users are all set; however, desktop users may need to install the Vulkan Validation Layers:
-
 - Windows: Install the [Vulkan SDK](https://vulkan.lunarg.com/sdk/home)
 - Linux, BSD, etc: Install `vulkan-validation-layers`, `vulkan-layers`, or similar from your package manager. It should be located in e.g. `/usr/lib64/libVkLayer_khronos_validation.so`

@@ -31,16 +30,15 @@ Ignoring SIGSEGV when debugging in host:
 ### gdb

 You must have GDB installed for aarch64 to debug the target. Install it through your package manager, e.g.:
+* On Arch:
+  * `sudo pacman -Syu aarch64-linux-gnu-gdb`
+* On Gentoo:
+  * `sudo emerge --ask crossdev`
+  * `sudo crossdev -t aarch64-unknown-linux-gnu --ex-gdb`

- On Arch:
-  - `sudo pacman -Syu aarch64-linux-gnu-gdb`
- On Gentoo:
-  - `sudo emerge --ask crossdev`
-  - `sudo crossdev -t aarch64-unknown-linux-gnu --ex-gdb`
-
-Run `./build/bin/eden-cli -c <path to your config file (see logs where you run eden normally to see where it is)> -d -g <path to game>`, or `Enable GDB Stub` at General > Debug, then hook up an aarch64-gdb:
-
- `target remote localhost:6543`
+Run `./build/bin/eden-cli -c <path to your config file (see logs where you run eden normally to see where it is)> -d -g <path to game>`
+Or `Enable GDB Stub` at General > Debug, then hook up an aarch64-gdb:
+* `target remote localhost:6543`

 Type `c` (for continue) and then if it crashes just do a `bt` (backtrace) and `layout asm`

@@ -71,27 +69,26 @@ For more information type `info gdb` and read [the man page](https://man7.org/li

 ## Simple checklist for debugging black screens using Renderdoc

-Renderdoc is a free, cross platform, multi-graphics API debugger. It is an invaluable tool for diagnosing issues with graphics applications, and includes support for Vulkan. Get it at [renderdoc.org](https://renderdoc.org).
+Renderdoc is a free, cross platform, multi-graphics API debugger. It is an invaluable tool for diagnosing issues with graphics applications, and includes support for Vulkan. Get it [here](https://renderdoc.org).

 Before using renderdoc to diagnose issues, it is always good to make sure there are no validation errors. Any errors means the behavior of the application is undefined. That said, renderdoc can help debug validation errors if you do have them.

 When debugging a black screen, there are many ways the application could have setup Vulkan wrong.
 Here is a short checklist of items to look at to make sure are appropriate:
-
- Draw call counts are correct (aka not zero, or if rendering many triangles, not 3)
- Vertex buffers are bound
- vertex attributes are correct - Make sure the size & offset of each attribute matches what should it should be
- Any bound push constants and descriptors have the right data - including:
-  - Matrices have correct values - double check the model, view, & projection matrices are uploaded correctly
- Pipeline state is correct
-  - viewport range is correct - x,y are 0,0; width & height are screen dimensions, minDepth is 0, maxDepth is 1, NDCDepthRange is 0,1
-  - Fill mode matches expected - usually solid
-  - Culling mode makes sense - commonly back or none
-  - The winding direction is correct - typically CCW (counter clockwise)
-  - Scissor region is correct - usually same as viewport's x,y,width, &height
- Blend state is correct
- Depth state is correct - typically enabled with Function set to Less than or Equal
- Swapchain images are bound when rendering to the swapchain
- Image being rendered to is the same as the one being presented when rendering to the swapchain
+* Draw call counts are correct (aka not zero, or if rendering many triangles, not 3)
+* Vertex buffers are bound
+* vertex attributes are correct - Make sure the size & offset of each attribute matches what should it should be
+* Any bound push constants and descriptors have the right data - including:
+  * Matrices have correct values - double check the model, view, & projection matrices are uploaded correctly
+* Pipeline state is correct
+  * viewport range is correct - x,y are 0,0; width & height are screen dimensions, minDepth is 0, maxDepth is 1, NDCDepthRange is 0,1
+  * Fill mode matches expected - usually solid
+  * Culling mode makes sense - commonly back or none
+  * The winding direction is correct - typically CCW (counter clockwise)
+  * Scissor region is correct - usually same as viewport's x,y,width, &height
+* Blend state is correct
+* Depth state is correct - typically enabled with Function set to Less than or Equal
+* Swapchain images are bound when rendering to the swapchain
+* Image being rendered to is the same as the one being presented when rendering to the swapchain

 Alternatively, a [RenderDoc Extension](https://github.com/baldurk/renderdoc-contrib/tree/main/baldurk/whereismydraw) ([Archive](https://web.archive.org/web/20250000000000*/https://github.com/baldurk/renderdoc-contrib/tree/main/baldurk/whereismydraw)) exists which automates doing a lot of these manual steps.
@@ -1,11 +1,9 @@
 # Development guidelines

 ## License Headers
-
 All commits must have proper license header accreditation.

 You can easily add all necessary license headers by running:
-
 ```sh
 git fetch origin master:master
 .ci/license-header.sh -u -c
@@ -13,7 +11,6 @@ git push
 ```

 Alternatively, you may omit `-c` and do an amend commit:
-
 ```sh
 git fetch origin master:master
 .ci/license-header.sh
@@ -25,10 +22,8 @@ If the work is licensed/vendored from other people or projects, you may omit the
 For more information on the license header script, run `.ci/license-header.sh -h`.

 ## Pull Requests
-
 Pull requests are only to be merged by core developers when properly tested and discussions conclude on Discord or other communication channels. Labels are recommended but not required. However, all PRs MUST be namespaced and optionally typed:
-
-```txt
+```
 [cmake] refactor: CPM over submodules
 [desktop] feat: implement firmware install from ZIP
 [hle] stub fw20 functions
@@ -39,7 +34,7 @@ Pull requests are only to be merged by core developers when properly tested and
 - The level of namespacing is generally left to the committer's choice.
 - However, we never recommend going more than two levels *except* in `hle`, in which case you may go as many as four levels depending on the specificity of your changes.
 - Ocassionally, up to two additional namespaces may be provided for more clarity.
-  - Changes that affect the entire project (sans CMake changes) should be namespaced as `meta`.
+  * Changes that affect the entire project (sans CMake changes) should be namespaced as `meta`.
 - Maintainers are permitted to change namespaces at will.
 - Commits within PRs are not required to be namespaced, but it is highly recommended.

@@ -55,7 +50,6 @@ When adding new settings, use `tr("Setting:")` if the setting is meant to be a f
 - Try to not write "slow/fast" options unless it clearly degrades/increases performance for a given case, as most options may modify behaviour that result in different metrics accross different systems. If for example the option is an "accuracy" option, writing "High" is sufficient to imply "Slow". No need to write "High (Slow)".

 Some examples:
-
 - "[...] negatively affecting image quality", "[...] degrading image quality": Same wording but with less filler.
 - "[...] this may cause some glitches or crashes in some games", "[...] this may cause soft-crashes": Crashes implies there may be glitches (as crashes are technically a form of a fatal glitch). The entire sentence is structured as "may cause [...] on some games", which is redundant, because "may cause [...] in games" has the same semantic meaning ("may" is a chance that it will occur on "some" given set).
 - "FIFO Relaxed is similar to FIFO [...]", "FIFO Relaxed [...]": The name already implies similarity.
@@ -63,16 +57,13 @@ Some examples:
 - "[...] it can [...] in some cases", "[...] it can [...]": Implied probability.

 Before adding a new setting, consider:
-
 - Does the piece of code that the setting pertains to, make a significant difference if it's on/off?
 - Can it be auto-detected?

 # IDE setup

 ## VSCode
-
 Copy this to `.vscode/settings.json`, get CMake tools and it should be ready to build:
-
 ```json
 {
    "editor.tabSize": 4,
@@ -92,7 +83,6 @@ You may additionally need the `Qt Extension Pack` extension if building Qt.
 # Build speedup

 If you have an HDD, use ramdisk (build in RAM), approximatedly you need 4GB for a full build with debug symbols:
-
 ```sh
 mkdir /tmp/ramdisk
 chmod 777 /tmp/ramdisk
@@ -106,11 +96,128 @@ umount /tmp/ramdisk
 # Assets and large files

 A general rule of thumb, before uploading files:
-
 - PNG files: Use [optipng](https://web.archive.org/web/20240325055059/https://optipng.sourceforge.net/).
 - SVG files: Use [svgo](https://github.com/svg/svgo).

 May not be used but worth mentioning nonethless:
-
 - OGG files: Use [OptiVorbis](https://github.com/OptiVorbis/OptiVorbis).
 - Video files: Use ffmpeg, preferably re-encode as AV1.
+
+# Bisecting older commits
+
+Since going into the past can be tricky (especially due to the dependencies from the project being lost thru time). This should "restore" the URLs for the respective submodules.
+
+```sh
+#!/bin/sh -e
+cat > .gitmodules <<EOF
+[submodule "enet"]
+	path = externals/enet
+	url = https://github.com/lsalzman/enet.git
+[submodule "cubeb"]
+	path = externals/cubeb
+	url = https://github.com/mozilla/cubeb.git
+[submodule "dynarmic"]
+	path = externals/dynarmic
+	url = https://github.com/lioncash/dynarmic.git
+[submodule "libusb"]
+	path = externals/libusb/libusb
+	url = https://github.com/libusb/libusb.git
+[submodule "discord-rpc"]
+	path = externals/discord-rpc
+	url = https://github.com/yuzu-emu-mirror/discord-rpc.git
+[submodule "Vulkan-Headers"]
+	path = externals/Vulkan-Headers
+	url = https://github.com/KhronosGroup/Vulkan-Headers.git
+[submodule "sirit"]
+	path = externals/sirit
+	url = https://github.com/yuzu-emu-mirror/sirit.git
+[submodule "mbedtls"]
+	path = externals/mbedtls
+	url = https://github.com/yuzu-emu-mirror/mbedtls.git
+[submodule "xbyak"]
+	path = externals/xbyak
+	url = https://github.com/herumi/xbyak.git
+[submodule "opus"]
+	path = externals/opus
+	url = https://github.com/xiph/opus.git
+[submodule "SDL"]
+	path = externals/SDL
+	url = https://github.com/libsdl-org/SDL.git
+[submodule "cpp-httplib"]
+	path = externals/cpp-httplib
+	url = https://github.com/yhirose/cpp-httplib.git
+[submodule "ffmpeg"]
+	path = externals/ffmpeg/ffmpeg
+	url = https://github.com/FFmpeg/FFmpeg.git
+[submodule "vcpkg"]
+	path = externals/vcpkg
+	url = https://github.com/microsoft/vcpkg.git
+[submodule "cpp-jwt"]
+	path = externals/cpp-jwt
+	url = https://github.com/arun11299/cpp-jwt.git
+[submodule "libadrenotools"]
+	path = externals/libadrenotools
+	url = https://github.com/bylaws/libadrenotools.git
+[submodule "tzdb_to_nx"]
+	path = externals/nx_tzdb/tzdb_to_nx
+	url = https://github.com/lat9nq/tzdb_to_nx.git
+[submodule "VulkanMemoryAllocator"]
+	path = externals/VulkanMemoryAllocator
+	url = https://github.com/GPUOpen-LibrariesAndSDKs/VulkanMemoryAllocator.git
+[submodule "breakpad"]
+	path = externals/breakpad
+	url = https://github.com/yuzu-emu-mirror/breakpad.git
+[submodule "simpleini"]
+	path = externals/simpleini
+	url = https://github.com/brofield/simpleini.git
+[submodule "oaknut"]
+	path = externals/oaknut
+	url = https://github.com/merryhime/oaknut.git
+[submodule "Vulkan-Utility-Libraries"]
+	path = externals/Vulkan-Utility-Libraries
+	url = https://github.com/KhronosGroup/Vulkan-Utility-Libraries.git
+[submodule "oboe"]
+	path = externals/oboe
+	url = https://github.com/google/oboe.git
+[submodule "externals/boost-headers"]
+	path = externals/boost-headers
+	url = https://github.com/boostorg/headers.git
+EOF
+git submodule sync
+update_or_checkout () {
+    if [ $0 = 'externals/sirit' ] \
+    || [ $0 = 'externals/dynarmic' ] \
+    || [ $0 = 'externals/breakpad' ] \
+    || [ $0 = 'externals/discord-rpc' ] \
+    || [ $0 = 'externals/mbedtls' ]; then
+        [ -f $0/CMakeLists.txt ] || git submodule update --force --remote --init -- $0
+        echo $0 ':remote' && git submodule update --remote $0
+        exit
+    elif [ $0 = 'externals/nx_tzdb/tzdb_to_nx' ]; then
+        [ -f $0/CMakeLists.txt ] || git submodule update --force --remote --init -- $0
+        echo $0 ':remote' && git submodule update --remote $0
+    else
+        echo $0 ':update' && git submodule update --init $0 && exit
+        echo $0 ':remote' && git submodule update --remote $0 && exit
+        echo $0 ':failure'
+    fi
+}
+export -f update_or_checkout
+grep path .gitmodules | sed 's/.*= //' | xargs -n 1 -I {} bash -c 'update_or_checkout "$@"' {}
+# Fix for LLVM builds
+sed -i 's/src\/yuzu\/main.cpp/${CMAKE_SOURCE_DIR}\/src\/yuzu\/main.cpp/g' CMakeModules/FindLLVM.cmake
+# Only after cloning and everything - fixes issues with Zydis
+cat > externals/dynarmic/src/dynarmic/common/x64_disassemble.cpp <<EOF
+#include <cstddef>
+#include <vector>
+#include <string>
+namespace Dynarmic::Common {
+void DumpDisassembledX64(const void* ptr, size_t size) {}
+std::vector<std::string> DisassembleX64(const void* ptr, size_t size) { return {}; }
+}
+EOF
+```
+
+If having issues with older artifacts, then run `rm -r externals/dynarmic/build externals/dynarmic/externals externals/nx_tzdb/tzdb_to_nx/externals externals/sirit/externals`.
+
+Configuring CMake with `-DSIRIT_USE_SYSTEM_SPIRV_HEADERS=1 -DCMAKE_CXX_FLAGS="-Wno-error" -DCMAKE_C_FLAGS="-Wno-error -Wno-array-parameter -Wno-stringop-overflow"` is also recommended.
@@ -17,10 +17,6 @@

 if (${CMAKE_SYSTEM_NAME} STREQUAL "SunOS")
    set(PLATFORM_SUN ON)
-elseif (${CMAKE_SYSTEM_NAME} STREQUAL "OpenOrbis")
-    set(PLATFORM_PS4 ON)
-elseif (${CMAKE_SYSTEM_NAME} STREQUAL "managarm")
-    set(PLATFORM_MANAGARM ON)
 elseif (${CMAKE_SYSTEM_NAME} STREQUAL "FreeBSD")
    set(PLATFORM_FREEBSD ON)
 elseif (${CMAKE_SYSTEM_NAME} STREQUAL "OpenBSD")
@@ -1259,7 +1259,7 @@ class ParameterPack final : public Node {
  // Setup OutputBuffer for a pack expansion, unless we're already expanding
  // one.
  void initializePackExpansion(OutputBuffer &OB) const {
-    if (OB.CurrentPackMax == (std::numeric_limits<unsigned>::max)()) {
+    if (OB.CurrentPackMax == std::numeric_limits<unsigned>::max()) {
      OB.CurrentPackMax = static_cast<unsigned>(Data.size());
      OB.CurrentPackIndex = 0;
    }
@@ -1353,7 +1353,7 @@ public:
  const Node *getChild() const { return Child; }

  void printLeft(OutputBuffer &OB) const override {
-    constexpr unsigned Max = (std::numeric_limits<unsigned>::max)();
+    constexpr unsigned Max = std::numeric_limits<unsigned>::max();
    ScopedOverride<unsigned> SavePackIdx(OB.CurrentPackIndex, Max);
    ScopedOverride<unsigned> SavePackMax(OB.CurrentPackMax, Max);
    size_t StreamPos = OB.getCurrentPosition();
@@ -88,8 +88,8 @@ public:

  /// If a ParameterPackExpansion (or similar type) is encountered, the offset
  /// into the pack that we're currently printing.
-  unsigned CurrentPackIndex = (std::numeric_limits<unsigned>::max)();
-  unsigned CurrentPackMax = (std::numeric_limits<unsigned>::max)();
+  unsigned CurrentPackIndex = std::numeric_limits<unsigned>::max();
+  unsigned CurrentPackMax = std::numeric_limits<unsigned>::max();

  /// When zero, we're printing template args and '>' needs to be parenthesized.
  /// Use a counter so we can simply increment inside parentheses.
@@ -11,105 +11,63 @@ set(FFmpeg_HWACCEL_FLAGS)
 set(FFmpeg_HWACCEL_INCLUDE_DIRS)
 set(FFmpeg_HWACCEL_LDFLAGS)

-if (NOT YUZU_USE_BUNDLED_FFMPEG)
-    set(FFmpeg_CROSS_COMPILE_FLAGS "")
-    if (ANDROID)
-        # TODO: Maybe use CMAKE_SYSROOT? and probably provide a toolchain file for android
-        # I mean isn't that the "proper" way anyways?
-        string(TOLOWER "${CMAKE_HOST_SYSTEM_NAME}" FFmpeg_HOST_SYSTEM_NAME)
-        set(TOOLCHAIN "${ANDROID_NDK}/toolchains/llvm/prebuilt/${FFmpeg_HOST_SYSTEM_NAME}-${CMAKE_HOST_SYSTEM_PROCESSOR}")
-        set(SYSROOT "${TOOLCHAIN}/sysroot")
-        set(FFmpeg_CPU "armv8-a")
-        list(APPEND FFmpeg_CROSS_COMPILE_FLAGS
-            --enable-cross-compile
-            --arch=arm64
-            #--cpu=${FFmpeg_CPU}
-            --cross-prefix="${TOOLCHAIN}/bin/aarch64-linux-android-"
-            --sysroot="${SYSROOT}"
-            --target-os=android
-            --extra-ldflags="--ld-path=${TOOLCHAIN}/bin/ld.lld"
-            --extra-ldflags="-nostdlib"
-        )
-        set(FFmpeg_IS_CROSS_COMPILING TRUE)
-    # User attempts to do a FFmpeg cross compilation because...
-    # Here we just quickly test against host/system processors not matching
-    # TODO: Test for versions not matching as well?
-    elseif (NOT (CMAKE_HOST_SYSTEM_PROCESSOR MATCHES CMAKE_SYSTEM_PROCESSOR
-    AND CMAKE_HOST_SYSTEM_NAME MATCHES CMAKE_SYSTEM_NAME))
-        string(TOLOWER "${CMAKE_SYSTEM_NAME}" FFmpeg_SYSTEM_NAME)
-        if (FFmpeg_SYSTEM_NAME STREQUAL "openorbis" OR FFmpeg_SYSTEM_NAME STREQUAL "managarm")
-            set(FFmpeg_SYSTEM_NAME "none")
-        endif()
-        # TODO: Can we really do better? Auto-detection? Something clever?
-        list(APPEND FFmpeg_CROSS_COMPILE_FLAGS
-            --enable-cross-compile
-            --arch="${CMAKE_SYSTEM_PROCESSOR}"
-            --target-os="${FFmpeg_SYSTEM_NAME}"
-            --sysroot="${CMAKE_SYSROOT}"
-        )
-        if (DEFINED FFmpeg_CROSS_PREFIX)
-            list(APPEND FFmpeg_CROSS_COMPILE_FLAGS --cross-prefix="${FFmpeg_CROSS_PREFIX}")
-        else()
-            message(WARNING "Please set FFmpeg_CROSS_PREFIX to your cross toolchain prefix, for example: \${CMAKE_STAGING_PREFIX}/bin/${CMAKE_SYSTEM_PROCESSOR}-${CMAKE_SYSTEM_NAME}-")
-        endif()
-        set(FFmpeg_IS_CROSS_COMPILING TRUE)
-    endif()
-endif()
-
-if (PLATFORM_PS4 OR PLATFORM_MANAGARM)
-    # Doesn't support VA-API, don't go thru the embarrassment of trying to enable it
-    list(APPEND FFmpeg_HWACCEL_FLAGS --disable-vaapi)
-elseif (UNIX AND NOT DEFINED FFmpeg_IS_CROSS_COMPILING)
+if (UNIX AND NOT ANDROID)
    find_package(PkgConfig REQUIRED)
-    pkg_check_modules(LIBVA libva)
-    pkg_check_modules(CUDA cuda)
-    pkg_check_modules(FFNVCODEC ffnvcodec)
-    pkg_check_modules(VDPAU vdpau)
+    if (NOT ANDROID)
+        pkg_check_modules(LIBVA libva)
+        pkg_check_modules(CUDA cuda)
+        pkg_check_modules(FFNVCODEC ffnvcodec)
+        pkg_check_modules(VDPAU vdpau)
+    endif()

-    find_package(X11)
-    if(X11_FOUND)
-        if (NOT APPLE)
-            # In Solaris needs explicit linking for ffmpeg which links to /lib/amd64/libX11.so
-            if(PLATFORM_SUN)
+    if (NOT APPLE)
+        # In Solaris needs explicit linking for ffmpeg which links to /lib/amd64/libX11.so
+        if(PLATFORM_SUN)
+            find_library(LIBDRM_LIB libdrm PATHS /usr/lib/64 /usr/lib/amd64 /usr/lib)
+            if(LIBDRM_LIB)
                list(APPEND FFmpeg_HWACCEL_LIBRARIES
                    X11
-                    "${CMAKE_SYSROOT}/usr/lib/xorg/amd64/libdrm.so")
+                    "${LIBDRM_LIB}")
+                message(STATUS "Found libdrm at: ${LIBDRM_LIB}")
            else()
-                pkg_check_modules(LIBDRM libdrm REQUIRED)
-                list(APPEND FFmpeg_HWACCEL_LIBRARIES
-                    ${LIBDRM_LIBRARIES})
-                list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
-                    ${LIBDRM_INCLUDE_DIRS})
+                message(WARNING "libdrm not found, disabling libdrm support")
+                list(APPEND FFmpeg_HWACCEL_FLAGS
+                    --disable-libdrm)
            endif()
+        else()
+            pkg_check_modules(LIBDRM libdrm REQUIRED)
+            list(APPEND FFmpeg_HWACCEL_LIBRARIES
+                ${LIBDRM_LIBRARIES})
+            list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
+                ${LIBDRM_INCLUDE_DIRS})
            list(APPEND FFmpeg_HWACCEL_FLAGS
                --enable-libdrm)
        endif()
-        if(LIBVA_FOUND)
-            pkg_check_modules(LIBVA-DRM libva-drm REQUIRED)
-            pkg_check_modules(LIBVA-X11 libva-x11 REQUIRED)
-            list(APPEND FFmpeg_HWACCEL_LIBRARIES
-                ${X11_LIBRARIES}
-                ${LIBVA-DRM_LIBRARIES}
-                ${LIBVA-X11_LIBRARIES}
-                ${LIBVA_LIBRARIES})
-            list(APPEND FFmpeg_HWACCEL_FLAGS
-                --enable-hwaccel=h264_vaapi
-                --enable-hwaccel=vp8_vaapi
-                --enable-hwaccel=vp9_vaapi)
-            list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
-                ${X11_INCLUDE_DIRS}
-                ${LIBVA-DRM_INCLUDE_DIRS}
-                ${LIBVA-X11_INCLUDE_DIRS}
-                ${LIBVA_INCLUDE_DIRS}
-            )
-            message(STATUS "ffmpeg: va-api libraries version ${LIBVA_VERSION} found")
-        else()
-            list(APPEND FFmpeg_HWACCEL_FLAGS --disable-vaapi)
-            message(WARNING "ffmpeg: libva-dev not found, disabling Video Acceleration API (VA-API)...")
-        endif()
+    endif()
+
+    if(LIBVA_FOUND)
+        find_package(X11 REQUIRED)
+        pkg_check_modules(LIBVA-DRM libva-drm REQUIRED)
+        pkg_check_modules(LIBVA-X11 libva-x11 REQUIRED)
+        list(APPEND FFmpeg_HWACCEL_LIBRARIES
+            ${X11_LIBRARIES}
+            ${LIBVA-DRM_LIBRARIES}
+            ${LIBVA-X11_LIBRARIES}
+            ${LIBVA_LIBRARIES})
+        list(APPEND FFmpeg_HWACCEL_FLAGS
+            --enable-hwaccel=h264_vaapi
+            --enable-hwaccel=vp8_vaapi
+            --enable-hwaccel=vp9_vaapi)
+        list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
+            ${X11_INCLUDE_DIRS}
+            ${LIBVA-DRM_INCLUDE_DIRS}
+            ${LIBVA-X11_INCLUDE_DIRS}
+            ${LIBVA_INCLUDE_DIRS}
+        )
+        message(STATUS "ffmpeg: va-api libraries version ${LIBVA_VERSION} found")
    else()
        list(APPEND FFmpeg_HWACCEL_FLAGS --disable-vaapi)
-        message(WARNING "ffmpeg: X11 libraries not found, disabling VA-API...")
+        message(WARNING "ffmpeg: libva-dev not found, disabling Video Acceleration API (VA-API)...")
    endif()

    if (FFNVCODEC_FOUND)
@@ -153,28 +111,6 @@ elseif (UNIX AND NOT DEFINED FFmpeg_IS_CROSS_COMPILING)
    endif()
 endif()

-if (PLATFORM_PS4)
-    list(APPEND FFmpeg_CROSS_COMPILE_LIBS
-        -lkernel
-        -lSceUserService
-        -lSceSysmodule
-        -lSceNet
-        -lSceLibcInternal
-    )
-    list(APPEND FFmpeg_CROSS_COMPILE_FLAGS
-        --disable-pthreads
-        --extra-cflags=${CMAKE_SYSROOT}/usr/include
-        --extra-cxxflags=${CMAKE_SYSROOT}/usr/include
-        --extra-libs="${FFmpeg_CROSS_COMPILE_LIBS}"
-    )
-elseif (PLATFORM_MANAGARM)
-    # Required for proper stuff
-    list(APPEND FFmpeg_CROSS_COMPILE_FLAGS 
-        --disable-pthreads
-        --extra-libs="${FFmpeg_CROSS_COMPILE_LIBS}"
-    )
-endif()
-
 if (YUZU_USE_BUNDLED_FFMPEG)
    AddJsonPackage(ffmpeg-ci)

@@ -245,6 +181,24 @@ else()

    find_program(BASH_PROGRAM bash REQUIRED)

+    set(FFmpeg_CROSS_COMPILE_FLAGS "")
+    if (ANDROID)
+        string(TOLOWER "${CMAKE_HOST_SYSTEM_NAME}" FFmpeg_HOST_SYSTEM_NAME)
+        set(TOOLCHAIN "${ANDROID_NDK}/toolchains/llvm/prebuilt/${FFmpeg_HOST_SYSTEM_NAME}-${CMAKE_HOST_SYSTEM_PROCESSOR}")
+        set(SYSROOT "${TOOLCHAIN}/sysroot")
+        set(FFmpeg_CPU "armv8-a")
+        list(APPEND FFmpeg_CROSS_COMPILE_FLAGS
+            --arch=arm64
+            #--cpu=${FFmpeg_CPU}
+            --enable-cross-compile
+            --cross-prefix=${TOOLCHAIN}/bin/aarch64-linux-android-
+            --sysroot=${SYSROOT}
+            --target-os=android
+            --extra-ldflags="--ld-path=${TOOLCHAIN}/bin/ld.lld"
+            --extra-ldflags="-nostdlib"
+        )
+    endif()
+
    # `configure` parameters builds only exactly what yuzu needs from FFmpeg
    # `--disable-vdpau` is needed to avoid linking issues
    set(FFmpeg_CC ${CMAKE_C_COMPILER_LAUNCHER}  ${CMAKE_C_COMPILER})
@@ -267,12 +221,8 @@ else()
                --enable-decoder=vp9
                --enable-filter=yadif,scale
                --enable-pic
-                --cc=${FFmpeg_CC}
-                --cxx=${FFmpeg_CXX}
-                --ld=${CMAKE_LINKER}
-                --extra-cflags=${CMAKE_C_FLAGS}
-                --extra-cxxflags=${CMAKE_CXX_FLAGS}
-                --extra-ldflags=${CMAKE_C_LINK_FLAGS}
+                --cc="${FFmpeg_CC}"
+                --cxx="${FFmpeg_CXX}"
                ${FFmpeg_HWACCEL_FLAGS}
                ${FFmpeg_CROSS_COMPILE_FLAGS}
        WORKING_DIRECTORY
@@ -1,6 +1,3 @@
-# SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-# SPDX-License-Identifier: GPL-3.0-or-later
-
 # SPDX-FileCopyrightText: 2023 yuzu Emulator Project
 # SPDX-License-Identifier: GPL-2.0-or-later

@@ -19,24 +16,15 @@ if (NOT FILE_LIST)
 endif()

 set(DIRECTORY_NAME ${HEADER_NAME})
-set(FILE_DATA "")

-string(APPEND FILE_DATA "[[nodiscard]] static inline std::vector<FileSys::VirtualFile> CollectFiles_${DIRECTORY_NAME}() {\n")
-string(APPEND FILE_DATA [[
-    std::vector<FileSys::VirtualFile> vfs_files;
-    auto const fn = [&](std::string_view name, std::span<const u8> data) {
-        vfs_files.push_back(std::make_shared<FileSys::VectorVfsFile>(
-            std::vector<u8>(data.begin(), data.end()),
-            std::string{name}
-        ));
-    };
-]])
+set(FILE_DATA "")
 foreach(ZONE_FILE ${FILE_LIST})
    if (ZONE_FILE STREQUAL "\n")
        continue()
    endif()
-    string(APPEND FILE_DATA "  {\n")
-    string(APPEND FILE_DATA "    constexpr uint8_t tzdb_data[] = {\n")
+
+    string(APPEND FILE_DATA "{\"${ZONE_FILE}\",\n{")
+
    file(READ ${ZONE_PATH}/${ZONE_FILE} ZONE_DATA HEX)
    string(LENGTH "${ZONE_DATA}" ZONE_DATA_LEN)
    foreach(I RANGE 0 ${ZONE_DATA_LEN} 2)
@@ -54,12 +42,9 @@ foreach(ZONE_FILE ${FILE_LIST})
            string(APPEND FILE_DATA " ")
        endif()
    endforeach()
-    string(APPEND FILE_DATA "    };\n")
-    string(APPEND FILE_DATA "    fn(\"${ZONE_FILE}\", tzdb_data);\n")
-    string(APPEND FILE_DATA "  }\n")
+
+    string(APPEND FILE_DATA "}},\n")
 endforeach()
-string(APPEND FILE_DATA "  return vfs_files;\n")
-string(APPEND FILE_DATA "}\n")

 file(READ ${NX_TZDB_SOURCE_DIR}/tzdb_template.h.in NX_TZDB_TEMPLATE_H_IN)
 file(CONFIGURE OUTPUT ${NX_TZDB_INCLUDE_DIR}/nx_tzdb/${HEADER_NAME}.h CONTENT "${NX_TZDB_TEMPLATE_H_IN}")
@@ -9,10 +9,10 @@

 namespace NxTzdb {

-// @DIRECTORY_NAME@
-
 // clang-format off
-@FILE_DATA@
+const static std::map<const char*, const std::vector<uint8_t>> @DIRECTORY_NAME@ = 
+{
+@FILE_DATA@};
 // clang-format on

 } // namespace NxTzdb
@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: 2023 yuzu Emulator Project
 // SPDX-FileCopyrightText: 1996 Arthur David Olson
 // SPDX-License-Identifier: BSD-2-Clause
@@ -469,8 +466,8 @@ CalendarTimeInternal* timesub(const time_t* timep, s64 offset, const Rule* sp,
        int signed_y = static_cast<s32>(y);
        tmp->tm_year = signed_y - TM_YEAR_BASE;
    }
-    else if ((!std::is_signed_v<time_t> || (std::numeric_limits<s32>::min)() + TM_YEAR_BASE <= y) &&
-        y - TM_YEAR_BASE <= (std::numeric_limits<s32>::max)()) {
+    else if ((!std::is_signed_v<time_t> || std::numeric_limits<s32>::min() + TM_YEAR_BASE <= y) &&
+        y - TM_YEAR_BASE <= std::numeric_limits<s32>::max()) {
        tmp->tm_year = static_cast<s32>(y - TM_YEAR_BASE);
    }
    else {
@@ -561,8 +558,8 @@ CalendarTimeInternal* localsub(Rule const* sp, time_t const* timep, s64 setname,
            else {
                newy += years;
            }
-            if (!((std::numeric_limits<s32>::min)() <= newy &&
-                newy <= (std::numeric_limits<s32>::max)())) {
+            if (!(std::numeric_limits<s32>::min() <= newy &&
+                newy <= std::numeric_limits<s32>::max())) {
                return nullptr;
            }
            result->tm_year = static_cast<s32>(newy);
@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: 2023 yuzu Emulator Project
 // SPDX-FileCopyrightText: 1996 Arthur David Olson
 // SPDX-License-Identifier: BSD-2-Clause
@@ -29,10 +26,10 @@ constexpr size_t TZ_MAX_CHARS = 50;
 constexpr size_t MY_TZNAME_MAX = 255;
 constexpr size_t TZNAME_MAXIMUM = 255;
 constexpr size_t TZ_MAX_LEAPS = 50;
-constexpr s64 TIME_T_MAX = (std::numeric_limits<s64>::max)();
-constexpr s64 TIME_T_MIN = (std::numeric_limits<s64>::min)();
+constexpr s64 TIME_T_MAX = std::numeric_limits<s64>::max();
+constexpr s64 TIME_T_MIN = std::numeric_limits<s64>::min();
 constexpr size_t CHARS_EXTRA = 3;
-constexpr size_t MAX_ZONE_CHARS = (std::max)(TZ_MAX_CHARS + CHARS_EXTRA, sizeof("UTC"));
+constexpr size_t MAX_ZONE_CHARS = std::max(TZ_MAX_CHARS + CHARS_EXTRA, sizeof("UTC"));
 constexpr size_t MAX_TZNAME_CHARS = 2 * (MY_TZNAME_MAX + 1);

 struct ttinfo {
@@ -54,7 +51,7 @@ struct Rule {
    std::array<s64, TZ_MAX_TIMES> ats;
    std::array<u8, TZ_MAX_TIMES> types;
    std::array<ttinfo, TZ_MAX_TYPES> ttis;
-    std::array<char, (std::max)(MAX_ZONE_CHARS, MAX_TZNAME_CHARS)> chars;
+    std::array<char, std::max(MAX_ZONE_CHARS, MAX_TZNAME_CHARS)> chars;
    s32 defaulttype;
    std::array <u8, 0x12C4> padding1;
 };
@@ -159,10 +159,7 @@ else()
    endif()

    if (ARCHITECTURE_x86_64)
-        add_compile_options($<$<COMPILE_LANGUAGE:C,CXX>:-mcx16>)
-        if (PLATFORM_LINUX OR PLATFORM_FREEBSD)
-            add_compile_options($<$<COMPILE_LANGUAGE:C,CXX>:-mtls-dialect=gnu2>)
-        endif()
+        add_compile_options(-mcx16)
    endif()

    if (APPLE AND CXX_CLANG)
@@ -188,7 +185,7 @@ else()
        add_compile_definitions(_FILE_OFFSET_BITS=64)
    endif()

-    if (YUZU_STATIC_BUILD AND NOT APPLE AND NOT MSVC)
+    if (YUZU_STATIC_BUILD AND NOT APPLE)
        add_compile_options(-static)

        # yuzu-cmd requires us to explicitly link libpthread, libgcc, and libstdc++ as static
@@ -88,6 +88,7 @@ android {
                        "-DBUILD_TESTING=OFF",
                        "-DYUZU_TESTS=OFF",
                        "-DDYNARMIC_TESTS=OFF",
+                        "-DENABLE_UPDATE_CHECKER=ON",
                        *extraCMakeArgs.toTypedArray()
                    )
                )
@@ -192,6 +193,12 @@ android {
            manifestPlaceholders += mapOf("appNameBase" to "Eden")
            resValue("string", "app_name_suffixed", "Eden")

+            externalNativeBuild {
+                cmake {
+                    arguments.add("-DGENSHIN_SPOOF=ON")
+                }
+            }
+
            ndk {
                abiFilters += listOf("arm64-v8a")
            }
@@ -203,12 +210,6 @@ android {
            resValue("string", "app_name_suffixed", "Eden Optimized")
            applicationId = "com.miHoYo.Yuanshen"

-            externalNativeBuild {
-                cmake {
-                    arguments.add("-DGENSHIN_SPOOF=ON")
-                }
-            }
-
            ndk {
                abiFilters += listOf("arm64-v8a")
            }
@@ -33,7 +33,6 @@ import org.yuzu.yuzu_emu.applets.web.WebBrowser
 * with the native side of the Yuzu code.
 */
 object NativeLibrary {
-    @Keep
    data class UpdateResult(
        var tag: String = "",
        var title: String = "",
@@ -18,7 +18,6 @@ enum class BooleanSetting(override val key: String) : AbstractBooleanSetting {
    SKIP_CPU_INNER_INVALIDATION("skip_cpu_inner_invalidation"),
    FIX_BLOOM_EFFECTS("fix_bloom_effects"),
    EMULATE_BGR565("emulate_bgr565"),
-    RESCALE_HACK("rescale_hack"),
    CPUOPT_UNSAFE_HOST_MMU("cpuopt_unsafe_host_mmu"),
    USE_DOCKED_MODE("use_docked_mode"),
    USE_AUTO_STUB("use_auto_stub"),
@@ -67,8 +67,7 @@ enum class IntSetting(override val key: String) : AbstractIntSetting {
    MY_PAGE_APPLET("my_page_applet_mode"),
    INPUT_OVERLAY_AUTO_HIDE("input_overlay_auto_hide"),
    OVERLAY_GRID_SIZE("overlay_grid_size"),
-    GPU_LOG_RING_BUFFER_SIZE("gpu_log_ring_buffer_size"),
-    ANDROID_PIPELINE_WORKERS("pipeline_worker_count")
+    GPU_LOG_RING_BUFFER_SIZE("gpu_log_ring_buffer_size")
    ;

    override fun getInt(needsGlobal: Boolean): Int = NativeConfig.getInt(key, needsGlobal)
@@ -582,16 +582,6 @@ abstract class SettingsItem(
                    units = "%"
                )
            )
-            put(
-                SliderSetting(
-                    IntSetting.ANDROID_PIPELINE_WORKERS,
-                    titleId = R.string.pipeline_worker_cores,
-                    descriptionId = R.string.pipeline_worker_cores_description,
-                    min = 4,
-                    max = 8,
-                    units = "cores"
-                )
-            )
            put(
                SingleChoiceSetting(
                    IntSetting.RENDERER_ANTI_ALIASING,
@@ -757,13 +747,6 @@ abstract class SettingsItem(
                    descriptionId = R.string.fix_bloom_effects_description
                )
            )
-            put(
-                SwitchSetting(
-                    BooleanSetting.RESCALE_HACK,
-                    titleId = R.string.rescale_hack,
-                    descriptionId = R.string.rescale_hack_description
-                )
-            )
            put(
                SwitchSetting(
                    BooleanSetting.EMULATE_BGR565,
@@ -293,9 +293,7 @@ class SettingsFragmentPresenter(
            add(BooleanSetting.SKIP_CPU_INNER_INVALIDATION.key)
            add(BooleanSetting.FIX_BLOOM_EFFECTS.key)
            add(BooleanSetting.EMULATE_BGR565.key)
-            add(BooleanSetting.RESCALE_HACK.key)
            add(BooleanSetting.RENDERER_ASYNCHRONOUS_SHADERS.key)
-            add(IntSetting.ANDROID_PIPELINE_WORKERS.key)
            add(BooleanSetting.RENDERER_ASYNCHRONOUS_GPU_EMULATION.key)
            add(BooleanSetting.RENDERER_ASYNC_PRESENTATION.key)
            add(SettingsItem.GPU_UNSWIZZLE_COMBINED)
@@ -1,4 +1,4 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+// SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later

 // SPDX-FileCopyrightText: 2023 yuzu Emulator Project
@@ -7,5 +7,5 @@
 package org.yuzu.yuzu_emu.utils

 object AddonUtil {
-    val validAddonDirectories = listOf("cheats", "exefs", "romfs", "romfslite", "romfs_ext")
+    val validAddonDirectories = listOf("cheats", "exefs", "romfs", "romfslite")
 }
@@ -147,13 +147,6 @@ namespace AndroidSettings {
                                                      &show_performance_overlay};


-        Settings::Setting<s32> pipeline_worker_count{linkage, 4, "pipeline_worker_count",
-                                 Settings::Category::Android,
-                                 Settings::Specialization::Default,
-                                 true,
-                                 true};
-
-
        Settings::Setting<bool> show_input_overlay{linkage, true, "show_input_overlay",
                                                   Settings::Category::Overlay};
        Settings::Setting<bool> overlay_snap_to_grid{linkage, false, "overlay_snap_to_grid",
@@ -66,8 +66,6 @@
    <string name="show_power_info_description">عرض استهلاك الطاقة الحالي والسعة المتبقية في البطارية</string>
    <string name="show_shaders_building">عرض بناء التظليل</string>
    <string name="show_shaders_building_description">عرض عدد التظليل التي يتم بناؤها</string>
-    <string name="pipeline_worker_cores">خيوط عامل خط الأنابيب</string>
-    <string name="pipeline_worker_cores_description">قم بإدارة عدد النوى المستخدمة لبناء خطوط أنابيب Vulkan، فالقيمة الأعلى ستحسن أداء تجميع خط الأنابيب ولكن درجات الحرارة سترتفع أيضًا.</string>
    <string name="overlay_position">موضع الطبقة</string>
    <string name="overlay_position_description">حدد مكان عرض الطبقة على الشاشة</string>
    <string name="overlay_position_top_left">أعلى اليمين</string>
@@ -487,15 +485,15 @@
    <string name="renderer_force_max_clock">إجبار السرعة القصوى (لأجهزة Adreno فقط)</string>
    <string name="renderer_force_max_clock_description">يجبر وحدة معالجة الرسومات على العمل بأقصى سرعة ممكنة (سيظل يتم تطبيق القيود الحرارية).</string>
    <string name="renderer_asynchronous_gpu_emulation">محاكاة غير متزامنة لوحدة معالجة الرسومات</string>
-    <string name="renderer_asynchronous_gpu_emulation_description">يمكن لهذه الحيلة أن تزيد الأداء عن طريق تشغيل محاكاة وحدة معالجة الرسومات بشكل غير متزامن على حساب مشاكل الرسومات وزيادة معدلات الأعطال بسبب العمليات المتعلقة بالتوقيت.</string>
+    <string name="renderer_asynchronous_gpu_emulation_description">يُشغّل هذا الخيار محاكاة وحدة معالجة الرسومات بشكل غير متزامن لتقليل توقف وحدة المعالجة المركزية وتحسين الإنتاجية. عطّل هذا الخيار فقط في حال واجهت مشاكل متعلقة بالتوقيت.</string>
    <string name="renderer_async_presentation">عرض غير متزامن</string>
-    <string name="renderer_async_presentation_description">يمكن لهذه الحيلة أن تزيد من الأداء عن طريق نقل عملية العرض إلى خيط معالجة منفصل على حساب مشاكل الرسوميات.</string>
+    <string name="renderer_async_presentation_description">يحسّن الأداء بشكل طفيف عن طريق نقل عملية العرض إلى خيط معالجة منفصل لوحدة المعالجة المركزية.</string>
    <string name="renderer_reactive_flushing">استخدم التنظيف التفاعلي</string>
    <string name="renderer_reactive_flushing_description">يحسن دقة العرض في بعض الألعاب على حساب الأداء.</string>
    <string name="enable_buffer_history">تمكين سجل التخزين المؤقت</string>
    <string name="enable_buffer_history_description">يُتيح هذا الخيار الوصول إلى حالات التخزين المؤقت السابقة. وقد يُحسّن جودة العرض وثبات الأداء في بعض الألعاب.</string>
    <string name="use_optimized_vertex_buffers">مخازن الرؤوس المُحسّنة</string>
-    <string name="use_optimized_vertex_buffers_description">يُتيح ربطًا مُحسَّنًا لمخازن الرؤوس لتحسين الأداء. يتطلب برامج تشغيل Mesa 26.0+ Turnip/ برامج تشغيل QCOM. قد يتعطل على برامج تشغيل Turnip القديمة (25.3 وما دون).</string>
+    <string name="use_optimized_vertex_buffers_description">يتيح ربط مخزن الرؤوس المُحسّن لتحسين الأداء. يتطلب برامج تشغيل Turnip/QCOM من إصدار Mesa 26.0 أو أحدث. سيؤدي إلى تعطل النظام عند استخدام برامج تشغيل Turnip الأقدم.</string>

    <string name="hacks">اختراقات</string>

@@ -507,8 +505,6 @@
    <string name="fix_bloom_effects_description">يقلل من ضبابية التوهج في LA/EOW  (Adreno A6XX - A7XX/ Turnip)، ويزيل التوهج في Burnout. تحذير: قد يسبب تشوهات رسومية في ألعاب أخرى.</string>
    <string name="emulate_bgr565">محاكاة BGR565</string>
    <string name="emulate_bgr565_description">يُصلح مشاكل انعكاس الألوان في الألعاب أو ظهور تشوهات غريبة أو ظلال غريبة.</string>
-    <string name="rescale_hack">تفعيل ميزة إعادة التحجيم القديمة</string>
-    <string name="rescale_hack_description">يُمكّن هذا الخيار من التعامل مع عملية إعادة تحجيم الألعاب بطريقة تقليدية باستخدام مسار إعادة التحجيم السريع</string>
    <string name="renderer_asynchronous_shaders">استخدم تظليل غير متزامن</string>
    <string name="renderer_asynchronous_shaders_description">يقوم بتجميع التظليل بشكل غير متزامن. قد يقلل ذلك من التقطعات ولكنه قد يؤدي أيضًا إلى حدوث أخطاء.</string>
    <string name="gpu_unswizzle_settings">إعدادات إلغاء ترتيب بيانات وحدة معالجة الرسومات</string>
@@ -527,10 +523,10 @@
    <string name="extensions">إضافات</string>

    <string name="dyna_state">الحالة الديناميكية الموسعة</string>
-    <string name="dyna_state_description">يتحكم هذا الخيار في عدد الميزات التي يمكن استخدامها في ExtendedDynamicState (EDS). كلما زادت القيمة، قلّ عدد عمليات تجميع خط الأنابيب بناءً على الحالة الديناميكية التي يدعمها برنامج التشغيل.</string>
+    <string name="dyna_state_description">يتحكم هذا الخيار في عدد الميزات التي يمكن استخدامها في حالة الديناميكية الموسعة. تسمح الأرقام الأعلى بمزيد من الميزات ويمكن أن تزيد من الأداء، ولكنها قد تسبب مشاكل مع بعض برامج التشغيل والأجهزة.</string>
    <string name="disabled">معطل</string>
    <string name="vertex_input_dynamic_state">حالة ديناميكية لإدخال الرأس</string>
-    <string name="vertex_input_dynamic_state_description">يتيح تمكين هذه الميزة معالجة أكثر مرونة لمدخلات الرؤوس، مما قد يقلل من وقت تجميع خط الأنابيب في vertex/buffer.</string>
+    <string name="vertex_input_dynamic_state_description">يتيح ميزة الحالة الديناميكية لإدخال الرأس لتحسين الجودة والأداء.</string>
    <string name="sample_shading_fraction">تظليل العينة</string>
    <string name="sample_shading_fraction_description">يسمح هذا الخيار بتنفيذ مُظلل الأجزاء لكل عينة في جزء متعدد العينات بدلاً من تنفيذه مرة واحدة لكل جزء. يُحسّن هذا من جودة الرسومات على حساب بعض الأداء.</string>

@@ -1163,6 +1159,5 @@
    <string name="license_fidelityfx_fsr_description">تحسين الجودة بدرجة عالية من AMD</string>
    <string name="external_content">محتوى خارجي</string>
    <string name="add_folders">إضافة مجلد</string>
-    <string name="percent">%1$d%%</string>

 </resources>
@@ -478,8 +478,10 @@
    <string name="extensions">Rozšíření</string>

    <string name="dyna_state">Úroveň EDS</string>
+    <string name="dyna_state_description">Určuje počet funkcí využívaných v rámci rozšířeného dynamického stavu API Vulkan (Extended Dynamic State). Vyšší hodnoty umožňují využít více funkcí a mohou zvýšit výkon, ale u některých ovladačů a výrobců grafických karet mohou způsobovat problémy s kompatibilitou.</string>
    <string name="disabled">Vypnuto</string>
    <string name="vertex_input_dynamic_state">Dynamický stav vstupu vrcholů (Vertex Input)</string>
+    <string name="vertex_input_dynamic_state_description">Aktivuje funkci dynamického stavu vstupu vrcholů (Vertex Input Dynamic State) pro lepší kvalitu a výkon.</string>
    <string name="display">Zobrazení</string>

    <string name="renderer_screen_layout">Orientace</string>
@@ -476,8 +476,10 @@ Wird der Handheld-Modus verwendet, verringert es die Auflösung und erhöht die
    <string name="extensions">Erweiterungen</string>

    <string name="dyna_state">Erweiterter dynamischer Status</string>
+    <string name="dyna_state_description">Steuert die Anzahl der Funktionen, die im \"Vertex Input Dynamic State\" werden können. Höhere Werte ermöglichen mehr Funktionen und können die Leistung steigern, können aber bei einigen Treibern und Anbietern zu Problemen führen.</string>
    <string name="disabled">Deaktiviert</string>
    <string name="vertex_input_dynamic_state">Vertex Input Dynamic State</string>
+    <string name="vertex_input_dynamic_state_description">Aktiviert die Funktion \"Vertex Input Dynamic State\" für bessere Qualität und Leistung.</string>
    <string name="sample_shading_fraction">Sample Shading</string>
    <string name="sample_shading_fraction_description">Ermöglicht es dem Fragment-Shader, in einem Multisample-Fragment pro Sample anstatt einmal pro Fragment ausgeführt zu werden. Verbessert die Grafikqualität auf Kosten der Leistung.</string>

@@ -66,8 +66,6 @@
    <string name="show_power_info_description">Muestra el consumo de energía actual y la capacidad restante de la batería</string>
    <string name="show_shaders_building">Mostrar construcción de sombreadores</string>
    <string name="show_shaders_building_description">Muestra el número actual de sombreadores que se están construyendo</string>
-    <string name="pipeline_worker_cores">Hilos de trabajo de canalización</string>
-    <string name="pipeline_worker_cores_description">Gestiona la cantidad de núcleos usados para la construcción de canalizaciones de Vulkan; un valor más alto mejorará el rendimiento de la contrucción de canalización, pero también aumentarán las temperaturas.</string>
    <string name="overlay_position">Posición de la superposición</string>
    <string name="overlay_position_description">Elige dónde se muestra la superposición en la pantalla</string>
    <string name="overlay_position_top_left">Superior izquierda</string>
@@ -481,14 +479,16 @@
    <string name="renderer_force_max_clock">Forzar velocidad al máximo (solo Adreno)</string>
    <string name="renderer_force_max_clock_description">Fuerza a la GPU a ejecutarse a la velocidad máxima de reloj posible (se seguirán aplicando restricciones térmicas).</string>
    <string name="renderer_asynchronous_gpu_emulation">Emulación de GPU asíncrona</string>
-    <string name="renderer_asynchronous_gpu_emulation_description">Este hack puede aumentar el rendimiento ejecutando la emulación de la GPU de forma asíncrona, a costa de problemas gráficos y un aumento en la tasa de fallos debido a operaciones relacionadas con la sincronización.</string>
+    <string name="renderer_asynchronous_gpu_emulation_description">Ejecuta la emulación de la GPU de forma asíncrona para reducir los bloqueos de la CPU y mejorar el rendimiento. Desactiva esta opción solo si experimentas problemas de sincronización.</string>
    <string name="renderer_async_presentation">Presentación asíncrona</string>
-    <string name="renderer_async_presentation_description">Este hack puede aumentar el rendimiento al mover la presentación a un hilo independiente de la CPU a costa de problemas gráficos.</string>
+    <string name="renderer_async_presentation_description">Mejora ligeramente el rendimiento al mover la presentación a un hilo independiente de la CPU.</string>
    <string name="renderer_reactive_flushing">Usar limpieza reactiva</string>
    <string name="renderer_reactive_flushing_description">Mejora la precisión de renderizado en algunos juegos, pero reduce el rendimiento.</string>
    <string name="enable_buffer_history">Activar el historial del búfer</string>
    <string name="enable_buffer_history_description">Permite el acceso al estado del búfer anterior. Esta opción puede mejorar la calidad de renderizado y la consistencia en el rendimiento de algunos juegos.</string>
    <string name="use_optimized_vertex_buffers">Búferes de vértices optimizados</string>
+    <string name="use_optimized_vertex_buffers_description">Permite la optimización del enlace del búfer de vértices para un mejor rendimiento. Requiere controladores Mesa 26.0+ Turnip/ controladores QCOM. Causará fallos con controladores Turnip más antiguos.</string>
+
    <string name="hacks">Hacks</string>

    <string name="fast_gpu_time">Tiempo rápido de la GPU</string>
@@ -499,7 +499,6 @@
    <string name="fix_bloom_effects_description">Reduce el efecto de resplandor en LA/EOW (Adreno A6XX - A7XX/ Turnip), elimina el resplandor en Burnout. Advertencia: puede causar artefactos gráficos en otros juegos.</string>
    <string name="emulate_bgr565">Emular BGR565</string>
    <string name="emulate_bgr565_description">Soluciona problemas con colores invertidos en juegos, artefactos o sombras extrañas.</string>
-    <string name="rescale_hack">Activar la pasada de reescalado heredada</string>
    <string name="renderer_asynchronous_shaders">Usar sombreadores asíncronos</string>
    <string name="renderer_asynchronous_shaders_description">Compila los sombreadores de forma asíncrona. Esto puede reducir los tirones, pero también puede introducir errores gráficos.</string>
    <string name="gpu_unswizzle_settings">Ajustes de desentrelazado de la GPU</string>
@@ -518,8 +517,10 @@
    <string name="extensions">Extensiones</string>

    <string name="dyna_state">Estado dinámico extendido</string>
+    <string name="dyna_state_description">Controla la cantidad de funciones que se pueden usar en el Estado Dinámico Extendido. Un número mayor permite más funciones y puede aumentar el rendimiento, pero puede causar problemas con algunos controladores y proveedores.</string>
    <string name="disabled">Desactivado</string>
    <string name="vertex_input_dynamic_state">Estado dinámico de entrada de vértices</string>
+    <string name="vertex_input_dynamic_state_description">Activa la función de estado dinámico de entrada de vértices para una mejor calidad y rendimiento.</string>
    <string name="sample_shading_fraction">Muestreo de sombreado</string>
    <string name="sample_shading_fraction_description">Permite que el sombreador de fragmentos se ejecute por muestra en un fragmento multimuestreado, en lugar de una sola vez por fragmento. Mejora la calidad de los gráficos a coste de algo de rendimiento.</string>

@@ -1152,6 +1153,5 @@
    <string name="license_fidelityfx_fsr_description">Upscaling de alta calidad de AMD</string>
    <string name="external_content">Contenido externo</string>
    <string name="add_folders">Añadir carpeta</string>
-    <string name="percent">%1$d%%</string>

 </resources>
@@ -413,9 +413,7 @@
    <string name="frame_limit_slider">Limiter le pourcentage de vitesse</string>
    <string name="frame_limit_slider_description">Spécifier le pourcentage pour limiter la vitesse d\'émulation. 100% correspond à la vitesse normale. Des valeurs plus élevées ou plus basses augmenteront ou diminueront la limite de vitesse.</string>
    <string name="turbo_speed_limit">Vitesse turbo</string>
-    <string name="turbo_speed_limit_description">Lorsque le mode Turbo est activé, l\'émulation s\'exécute à cette vitesse.</string>
    <string name="slow_speed_limit">Vitesse lente</string>
-    <string name="slow_speed_limit_description">Lorsque le mode Lent est activé, l\'émulation s\'exécute à cette vitesse.</string>
    <string name="cpu_backend">Backend du CPU</string>
    <string name="cpu_accuracy">Précision du CPU</string>
    <string name="value_with_units">%1$s%2$s</string>
@@ -483,6 +481,7 @@
    <string name="dyna_state">État dynamique étendu</string>
    <string name="disabled">Désactivé</string>
    <string name="vertex_input_dynamic_state">État dynamique d\'entrée de sommet</string>
+    <string name="vertex_input_dynamic_state_description">Active la fonctionnalité d\'état dynamique des entrées de sommets pour une meilleure qualité et de meilleures performances.</string>
    <string name="display">Affichage</string>

    <string name="renderer_screen_layout">Orientation</string>
@@ -476,8 +476,10 @@
    <string name="extensions">Rozszerzenia</string>

    <string name="dyna_state">Rozszerzony stan dynamiczny</string>
+    <string name="dyna_state_description">Kontroluje liczbę funkcji, które mogą być używane w Extended Dynamic State. Wyższe wartości pozwalają na użycie większej liczby funkcji i mogą zwiększyć wydajność, ale mogą powodować problemy z niektórymi sterownikami i u niektórych producentów.</string>
    <string name="disabled">Wyłączone</string>
    <string name="vertex_input_dynamic_state">Dynamiczny stan wejścia wierzchołków</string>
+    <string name="vertex_input_dynamic_state_description">Włącza funkcję dynamicznego stanu wejścia wierzchołków, poprawiając jakość i wydajność.</string>
    <string name="sample_shading_fraction">Cieniowanie próbkowane</string>
    <string name="sample_shading_fraction_description">Pozwala uruchamiać shader fragmentów dla każdej próbki w wielopróbkowanym fragmencie zamiast raz na fragment. Poprawia jakość grafiki kosztem części wydajności.</string>

@@ -463,6 +463,7 @@
    <string name="dyna_state">Extended Dynamic State</string>
    <string name="disabled">Desativado</string>
    <string name="vertex_input_dynamic_state">Vertex Input Dynamic State</string>
+    <string name="vertex_input_dynamic_state_description">Ativa o recurso de vertex input dynamic state para melhor qualidade e desempenho.</string>
    <string name="display">Tela</string>

    <string name="renderer_screen_layout">Orientação</string>
@@ -66,8 +66,6 @@
    <string name="show_power_info_description">Показать текущее энергопотребление и оставшуюся емкость аккумулятора</string>
    <string name="show_shaders_building">Показать компиляцию шейдеров</string>
    <string name="show_shaders_building_description">Отображает текущее количество шейдеров, которые компилируются</string>
-    <string name="pipeline_worker_cores">Рабочие потоки конвейера</string>
-    <string name="pipeline_worker_cores_description">Позволяет настроить количество ядер, задействованных при построении конвейеров Vulkan. Чем выше значение, тем быстрее будет компиляция конвейеров, однако это приведёт к повышению температуры устройства.</string>
    <string name="overlay_position">Позиция оверлея</string>
    <string name="overlay_position_description">Расположение оверлея на экране</string>
    <string name="overlay_position_top_left">Сверху слева</string>
@@ -483,16 +481,14 @@
    <string name="renderer_force_max_clock">Принудительная максимальная тактовая частота (только для Adreno)</string>
    <string name="renderer_force_max_clock_description">Заставляет ГПУ работать на максимально возможных тактовых частотах (тепловые ограничения все равно будут применяться).</string>
    <string name="renderer_asynchronous_gpu_emulation">Асинхронная эмуляция ГПУ</string>
-    <string name="renderer_asynchronous_gpu_emulation_description">Может повысить производительность за счёт асинхронного запуска эмуляции ГПУ, но ценой появления графических ошибок и увеличения частоты вылетов из-за операций, зависящих от синхронизации.</string>
+    <string name="renderer_asynchronous_gpu_emulation_description">Выполняет эмуляцию ГПУ асинхронно для снижения задержек ЦП и увеличения производительности. Отключайте только при возникновении проблем с таймингами.</string>
    <string name="renderer_async_presentation">Асинхронная презентация</string>
-    <string name="renderer_async_presentation_description">Может повысить производительность за счёт перемещения вывода кадров в отдельный поток ЦП, но ценой возникновения графических проблем.</string>
+    <string name="renderer_async_presentation_description">Немного улучшает производительность, перемещая презентацию в отдельный поток ЦП.</string>
    <string name="renderer_reactive_flushing">Реактивная очистка</string>
    <string name="renderer_reactive_flushing_description">Повышение точности рендеринга в некоторых играх за счет снижения производительности.</string>
    <string name="enable_buffer_history">Включить историю буфера</string>
    <string name="enable_buffer_history_description">Позволяет обращаться к предыдущим состояниям буфера. Эта опция может повысить качество рендеринга и стабильность производительности в некоторых играх.</string>
    <string name="use_optimized_vertex_buffers">Оптимизированные вершинные буферы</string>
-    <string name="use_optimized_vertex_buffers_description">Включает оптимизированную привязку вершинного буфера для повышения производительности. Требует Mesa Turnip 26.0+ / QCOM. Приводит к вылету на старых версиях драйверов Turnip (25.3 и ниже).</string>
-
    <string name="hacks">Хаки</string>

    <string name="fast_gpu_time">Быстрое время ГПУ</string>
@@ -500,11 +496,6 @@
    <string name="skip_cpu_inner_invalidation">Пропустить внутреннюю инвалидацию ЦП</string>
    <string name="skip_cpu_inner_invalidation_description">Пропускает некоторые инвалидации кэша на стороне ЦП при обновлениях памяти, уменьшая нагрузку на процессор и повышая производительность. Может вызывать сбои в некоторых играх.</string>
    <string name="fix_bloom_effects">Исправить эффекты размытия</string>
-    <string name="fix_bloom_effects_description">Частично убирает размытие в LA/EOW (Adreno A6XX - A7XX/ Turnip), полностью отключает его в Burnout. Внимание: может вызывать графические артефакты в других играх.</string>
-    <string name="emulate_bgr565">Эмулировать BGR565</string>
-    <string name="emulate_bgr565_description">Исправляет проблемы с инвертированными цветами в играх, а также со странными артефактами или некорректными тенями.</string>
-    <string name="rescale_hack">Включить старый метод изменения разрешения</string>
-    <string name="rescale_hack_description">Включает старый метод обработки этапа перенастройки масштабирования для игр за счёт использования быстрого алгоритма перемасштабирования.</string>
    <string name="renderer_asynchronous_shaders">Использовать асинхронные шейдеры</string>
    <string name="renderer_asynchronous_shaders_description">Компилирует шейдеры асинхронно. Это может уменьшить подтормаживания, но также может вызвать графические артефакты.</string>
    <string name="gpu_unswizzle_settings">Настройки распаковки текстур (Unswizzle)</string>
@@ -523,10 +514,10 @@
    <string name="extensions">Расширения</string>

    <string name="dyna_state">Расширенное динамическое состояние</string>
-    <string name="dyna_state_description">Управляет количеством функций, доступных для использования в расширенном динамическом состояние. Более высокое значение позволит сократить количество компиляций конвейеров за счёт поддержки динамического состояния драйвером.</string>
+    <string name="dyna_state_description">Управляет количеством функций, доступных в режиме «Расширенное динамическое состояние». Большее число позволяет задействовать больше функций и может повысить производительность, но способно вызывать проблемы с некоторыми драйверами и графикой.</string>
    <string name="disabled">Отключено</string>
    <string name="vertex_input_dynamic_state">Динамическое состояние ввода вершин</string>
-    <string name="vertex_input_dynamic_state_description">Включение этой функции обеспечивает более гибкую обработку входных данных вершин, что потенциально сокращает время компиляции конвейера на этапе работы с вершинами и буферами.</string>
+    <string name="vertex_input_dynamic_state_description">Включает функцию динамического состояния ввода вершин для повышения качества и производительности</string>
    <string name="sample_shading_fraction">Сэмпловое затенение</string>
    <string name="sample_shading_fraction_description">Позволяет шейдеру фрагментов выполняться для каждого сэмпла в многосэмпловом фрагменте, а не один раз на фрагмент. Улучшает качество графики ценой некоторого падения производительности.</string>

@@ -1159,6 +1150,5 @@
    <string name="license_fidelityfx_fsr_description">Высококачественное масштабирование от AMD</string>
    <string name="external_content">Дополнительный контент</string>
    <string name="add_folders">Добавить папку</string>
-    <string name="percent">%1$d %%</string>

 </resources>
@@ -66,8 +66,6 @@
    <string name="show_power_info_description">Показати поточне споживання енергії та залишкову ємність акумулятора</string>
    <string name="show_shaders_building">Показати побудову шейдерів</string>
    <string name="show_shaders_building_description">Показати поточну кількість шейдерів, які наразі компілюються</string>
-    <string name="pipeline_worker_cores">Потоки обробника конвеєра</string>
-    <string name="pipeline_worker_cores_description">Керує кількістю ядер, що використовуються для збірки конвеєрів Vulkan. Вище значення покращить продуктивність компіляції конвеєра, але також підвищить температуру.</string>
    <string name="overlay_position">Позиція оверлею</string>
    <string name="overlay_position_description">Обрати розташування виводу статистики на екрані</string>
    <string name="overlay_position_top_left">Вгорі ліворуч</string>
@@ -483,15 +481,15 @@
    <string name="renderer_force_max_clock">Максимальна тактова частота (тільки Adreno)</string>
    <string name="renderer_force_max_clock_description">Змушує GPU працювати на максимальній тактовій частоті.</string>
    <string name="renderer_asynchronous_gpu_emulation">Асинхронна емуляція ГП</string>
-    <string name="renderer_asynchronous_gpu_emulation_description">Це обхідне рішення може покращити продуктивність завдяки асинхронному виконанню емуляції ГП, але спричинить проблеми з графікою та збільшить частоту збоїв чутливих до таймінгів операцій.</string>
+    <string name="renderer_asynchronous_gpu_emulation_description">Емуляція ГП виконується асинхронно для зменшення затримок ЦП й покращення пропускної здатності. Вимкніть лише у випадку виникнення проблем із таймінгами.</string>
    <string name="renderer_async_presentation">Асинхронне подання</string>
-    <string name="renderer_async_presentation_description">Це обхідне рішення може покращити продуктивність завдяки переміщенню подання на окремий потік ЦП, але спричинить проблеми з графікою.</string>
+    <string name="renderer_async_presentation_description">Трохи покращує продуктивність завдяки переміщенню подання на окремий потік ЦП.</string>
    <string name="renderer_reactive_flushing">Реактивне очищення</string>
    <string name="renderer_reactive_flushing_description">Покращує точність рендерингу в деяких іграх.</string>
    <string name="enable_buffer_history">Увімкнути історію буфера</string>
    <string name="enable_buffer_history_description">Вмикає доступ до попередніх станів буфера. Цей параметр може покращити якість візуалізації та стабільну продуктивність у деяких іграх.</string>
    <string name="use_optimized_vertex_buffers">Оптимізовані буфери вершин</string>
-    <string name="use_optimized_vertex_buffers_description">Застосовує оптимізований буфер вершин, щоб покращити продуктивність. Потребує драйверів Mesa 26.0+ Turnip / QCOM. На старіших драйверах Turnip виникатиме збій (25.3 і нижче).</string>
+    <string name="use_optimized_vertex_buffers_description">Застосовує оптимізований буфер вершин, щоб покращити продуктивність. Потребує драйверів Mesa 26.0+ Turnip / QCOM. На старіших драйверах Turnip виникатиме збій.</string>

    <string name="hacks">Обхідні рішення</string>

@@ -503,8 +501,6 @@
    <string name="fix_bloom_effects_description">Зменшує розмиття світіння в LA/EOW (Adreno A6XX–A7XX / Turnip), прибирає світіння в Burnout. Увага: може спричинити графічні артефакти в інших іграх.</string>
    <string name="emulate_bgr565">Емулювати BGR565</string>
    <string name="emulate_bgr565_description">Виправляє проблеми з інвертованими кольорами в іграх або дивними артефактами чи тінями.</string>
-    <string name="rescale_hack">Увімкнути застаріле масштабування</string>
-    <string name="rescale_hack_description">Вмикає застарілу обробку масштабування для ігор, використовуючи швидкий шлях масштабування</string>
    <string name="renderer_asynchronous_shaders">Асинхронні шейдери</string>
    <string name="renderer_asynchronous_shaders_description">Компілює шейдери асинхронно. Це може зменшити затримки, але також може спричинити графічні баги.</string>
    <string name="gpu_unswizzle_settings">Налаштування розпакування за допомогою ГП</string>
@@ -523,10 +519,10 @@
    <string name="extensions">Розширення</string>

    <string name="dyna_state">Розширений динамічний стан</string>
-    <string name="dyna_state_description">Керує кількістю функцій, які можна використовувати в ExtendedDynamicState (EDS). Вище значення дозволить зменшити кількість компіляцій конвеєра на основі динамічного стану, підтримуваного драйвером.</string>
+    <string name="dyna_state_description">Керує кількістю функцій, які можна використовувати в «Розширеному динамічному стані». Вище число дозволяє більше функцій і може покращити продуктивність, але може спричинити проблеми з деякими драйверами й виробниками.</string>
    <string name="disabled">Вимкнено</string>
    <string name="vertex_input_dynamic_state">Динамічний стан введення вершин</string>
-    <string name="vertex_input_dynamic_state_description">Увімкнення цієї функції дозволить гнучкішу обробку введення вершин. Може зменшити час компіляції конвеєра для вершин/буфера.</string>
+    <string name="vertex_input_dynamic_state_description">Вмикає можливість динамічного стану введення вершин для кращих якості й продуктивності.</string>
    <string name="sample_shading_fraction">Простий шейдинг</string>
    <string name="sample_shading_fraction_description">Дозволяє виконувати фрагмент шейдера для кожного зразка в багатозразковому фрагменті замість одного разу для кожного фрагмента. Покращує якість графікі ціною втрати продуктивності.</string>

@@ -1159,6 +1155,5 @@
    <string name="license_fidelityfx_fsr_description">Високоякісне масштабування від AMD</string>
    <string name="external_content">Зовнішній вміст</string>
    <string name="add_folders">Додати теку</string>
-    <string name="percent">%1$d%%</string>

 </resources>
@@ -475,7 +475,9 @@
    <string name="renderer_force_max_clock">强制最大时钟 (仅限 Adreno)</string>
    <string name="renderer_force_max_clock_description">强制 GPU 以最大时钟运行 (仍被温控限制)。</string>
    <string name="renderer_asynchronous_gpu_emulation">GPU 异步模拟</string>
+    <string name="renderer_asynchronous_gpu_emulation_description">异步运行 GPU 模拟，以减少 CPU 停顿并提高吞吐量。仅当遇到与时序相关的问题时才应禁用此功能。</string>
    <string name="renderer_async_presentation">异步呈现</string>
+    <string name="renderer_async_presentation_description">通过将呈现操作移至单独的 CPU 线程来略微提升性能。</string>
    <string name="renderer_reactive_flushing">启用反应性刷新</string>
    <string name="renderer_reactive_flushing_description">通过牺牲性能来提高某些游戏的渲染精度。</string>
    <string name="enable_buffer_history">启用缓冲区历史</string>
@@ -488,9 +490,6 @@
    <string name="skip_cpu_inner_invalidation">跳过CPU内部无效化</string>
    <string name="skip_cpu_inner_invalidation_description">在内存更新期间跳过某些CPU端缓存无效化，减少CPU使用率并提高其性能。可能会导致某些游戏出现故障或崩溃。</string>
    <string name="fix_bloom_effects">修复 Bloom 效果</string>
-    <string name="fix_bloom_effects_description">减少《塞尔达传说：智慧的再现》（Adreno A6XX - A7XX/ Turnip）中的 bloom 模糊，并移除《Burnout》中的 bloom 效果。警告：可能会导致在其他游戏中出现图形异常。</string>
-    <string name="emulate_bgr565">模拟 BGR565</string>
-    <string name="emulate_bgr565_description">修复了游戏中的颜色反转以及出现的异常画面瑕疵或奇怪阴影问题</string>
    <string name="renderer_asynchronous_shaders">使用异步着色器</string>
    <string name="renderer_asynchronous_shaders_description">异步编译着色器。这可能会减少卡顿，但也可能会导致图形错误。</string>
    <string name="gpu_unswizzle_settings">GPU 还原设置</string>
@@ -509,8 +508,10 @@
    <string name="extensions">扩展</string>

    <string name="dyna_state">扩展动态状态</string>
+    <string name="dyna_state_description">控制在扩展动态状态中可使用的函数数量。更高的数值允许启用更多功能，并可能提升性能，但同时也可能导致额外的图形问题。</string>
    <string name="disabled">已禁用</string>
    <string name="vertex_input_dynamic_state">顶点输入动态状态</string>
+    <string name="vertex_input_dynamic_state_description">开启顶点输入动态状态功能来获得更好的质量和性能。</string>
    <string name="sample_shading_fraction">采样着色</string>
    <string name="sample_shading_fraction_description">允许片段着色器在多采样片段中每个样本执行一次，而不是每个片段执行一次。以提高性能为代价改善图形质量。</string>

@@ -1143,6 +1144,5 @@
    <string name="license_fidelityfx_fsr_description">AMD 的高品质画面增强技术</string>
    <string name="external_content">外部内容</string>
    <string name="add_folders">添加文件夹</string>
-    <string name="percent">%1$d%%</string>

 </resources>
@@ -466,6 +466,7 @@
    <string name="dyna_state">擴展動態狀態</string>
    <string name="disabled">已停用</string>
    <string name="vertex_input_dynamic_state">頂點輸入動態狀態</string>
+    <string name="vertex_input_dynamic_state_description">啟用頂點輸入動態狀態以取得更佳的品質及性能</string>
    <string name="display">顯示</string>

    <string name="renderer_screen_layout">方向</string>
@@ -1 +1 @@
-<?xml version='1.0' encoding='utf-8'?><resources><color name='ic_launcher_background'>#ffd700</color></resources>
+<?xml version='1.0' encoding='utf-8'?><resources><color name='ic_launcher_background'>#1F143C</color></resources>
@@ -71,8 +71,6 @@
    <string name="show_power_info_description">Display current power draw and remaining capacity on battery</string>
    <string name="show_shaders_building">Show Shaders Building</string>
    <string name="show_shaders_building_description">Display current number of shaders being built</string>
-    <string name="pipeline_worker_cores">Pipeline Worker Threads</string>
-    <string name="pipeline_worker_cores_description">Manage the amount of cores used for building Vulkan pipelines, the higher value will improve pipeline compilation performance but temperatures will increase as well.</string>
    <string name="overlay_position">Overlay Position</string>
    <string name="overlay_position_description">Choose where the overlay is displayed on the screen</string>
    <string name="overlay_position_top_left">Top Left</string>
@@ -493,15 +491,15 @@
    <string name="renderer_force_max_clock">Force maximum clocks (Adreno only)</string>
    <string name="renderer_force_max_clock_description">Forces the GPU to run at the maximum possible clocks (thermal constraints will still be applied).</string>
    <string name="renderer_asynchronous_gpu_emulation">GPU async emulation</string>
-    <string name="renderer_asynchronous_gpu_emulation_description">This hack can increase performance by running GPU emulation asynchronously at the cost of graphical issues and increased crash rates by timing-related operations.</string>
+    <string name="renderer_asynchronous_gpu_emulation_description">Runs GPU emulation asynchronously to reduce CPU stalls and improve throughput. Disable this only if you run into timing-related issues.</string>
    <string name="renderer_async_presentation">Asynchronous presentation</string>
-    <string name="renderer_async_presentation_description">This hack can increase performance by moving presentation to a separate CPU thread at the cost of graphical issues.</string>
+    <string name="renderer_async_presentation_description">Slightly improves performance by moving presentation to a separate CPU thread.</string>
    <string name="renderer_reactive_flushing">Use reactive flushing</string>
    <string name="renderer_reactive_flushing_description">Improves rendering accuracy in some games at the cost of performance.</string>
    <string name="enable_buffer_history">Enable buffer history</string>
    <string name="enable_buffer_history_description">Enables access to previous buffer states. This option may improve rendering quality and performance consistency in some games.</string>
    <string name="use_optimized_vertex_buffers">Optimized Vertex Buffers</string>
-    <string name="use_optimized_vertex_buffers_description">Enables optimized vertex buffer binding for improved performance. Requires Mesa 26.0+ Turnip drivers/ QCOM drivers. Will crash on older Turnip drivers (25.3 and below).</string>
+    <string name="use_optimized_vertex_buffers_description">Enables optimized vertex buffer binding for improved performance. Requires Mesa 26.0+ Turnip drivers/ QCOM drivers. Will crash on older Turnip drivers.</string>

    <string name="hacks">Hacks</string>

@@ -513,8 +511,6 @@
    <string name="fix_bloom_effects_description">Reduces bloom blur in LA/EOW (Adreno A6XX - A7XX/ Turnip), removes bloom in Burnout. Warning: may cause graphical artifacts in other games.</string>
    <string name="emulate_bgr565">Emulate BGR565</string>
    <string name="emulate_bgr565_description">Fixes problems with inverted colors in games or strange artifacts or strange shadows.</string>
-    <string name="rescale_hack">Enable Legacy Rescale Pass</string>
-    <string name="rescale_hack_description">Enables a legacy handling for the rescale configuration pass for games by using a quick rescale path</string>
    <string name="renderer_asynchronous_shaders">Use asynchronous shaders</string>
    <string name="renderer_asynchronous_shaders_description">Compiles shaders asynchronously. This may reduce stutters but may also introduce glitches.</string>
    <string name="gpu_unswizzle_settings">GPU Unswizzle Settings</string>
@@ -533,10 +529,10 @@
    <string name="extensions">Extensions</string>

    <string name="dyna_state">Extended Dynamic State</string>
-    <string name="dyna_state_description">Controls the number of features that can be used in ExtendedDynamicState (EDS). The higher value will allow to reduce the amount of pipeline compilations based on the dynamic state supported by driver.</string>
+    <string name="dyna_state_description">Controls the number of features that can be used in Extended Dynamic State. Higher numbers allow for more features and can increase performance, but may cause issues with some drivers and vendors.</string>
    <string name="disabled">Disabled</string>
    <string name="vertex_input_dynamic_state">Vertex Input Dynamic State</string>
-    <string name="vertex_input_dynamic_state_description">Enabling this feature allows for more flexible vertex input handling, potentially reducing pipeline compilation time in vertex/buffer.</string>
+    <string name="vertex_input_dynamic_state_description">Enables vertex input dynamic state feature for better quality and performance.</string>
    <string name="sample_shading_fraction">Sample Shading</string>
    <string name="sample_shading_fraction_description">Allows the fragment shader to execute per sample in a multi-sampled fragment instead once per fragment. Improves graphics quality at the cost of some performance.</string>

@@ -184,12 +184,19 @@ if(ARCHITECTURE_x86_64)
        x64/cpu_detect.h
        x64/cpu_wait.cpp
        x64/cpu_wait.h
+        x64/native_clock.cpp
+        x64/native_clock.h
        x64/rdtsc.cpp
        x64/rdtsc.h
-        x64/xbyak.h)
+        x64/xbyak_abi.h
+        x64/xbyak_util.h)
    target_link_libraries(common PRIVATE xbyak::xbyak)
 endif()

+if(HAS_NCE)
+    target_sources(common PRIVATE arm64/native_clock.cpp arm64/native_clock.h)
+endif()
+
 if(MSVC)
    target_compile_definitions(
        common
@@ -0,0 +1,87 @@
+// SPDX-FileCopyrightText: Copyright 2023 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#ifdef ANDROID
+#include <sys/system_properties.h>
+#endif
+#include "common/arm64/native_clock.h"
+
+namespace Common::Arm64 {
+
+namespace {
+
+NativeClock::FactorType GetFixedPointFactor(u64 num, u64 den) {
+    return (static_cast<NativeClock::FactorType>(num) << 64) / den;
+}
+
+u64 MultiplyHigh(u64 m, NativeClock::FactorType factor) {
+    return static_cast<u64>((m * factor) >> 64);
+}
+
+} // namespace
+
+NativeClock::NativeClock() {
+    const u64 host_cntfrq = GetHostCNTFRQ();
+    ns_cntfrq_factor = GetFixedPointFactor(NsRatio::den, host_cntfrq);
+    us_cntfrq_factor = GetFixedPointFactor(UsRatio::den, host_cntfrq);
+    ms_cntfrq_factor = GetFixedPointFactor(MsRatio::den, host_cntfrq);
+    guest_cntfrq_factor = GetFixedPointFactor(CNTFRQ, host_cntfrq);
+    gputick_cntfrq_factor = GetFixedPointFactor(GPUTickFreq, host_cntfrq);
+}
+
+std::chrono::nanoseconds NativeClock::GetTimeNS() const {
+    return std::chrono::nanoseconds{MultiplyHigh(GetUptime(), ns_cntfrq_factor)};
+}
+
+std::chrono::microseconds NativeClock::GetTimeUS() const {
+    return std::chrono::microseconds{MultiplyHigh(GetUptime(), us_cntfrq_factor)};
+}
+
+std::chrono::milliseconds NativeClock::GetTimeMS() const {
+    return std::chrono::milliseconds{MultiplyHigh(GetUptime(), ms_cntfrq_factor)};
+}
+
+s64 NativeClock::GetCNTPCT() const {
+    return MultiplyHigh(GetUptime(), guest_cntfrq_factor);
+}
+
+s64 NativeClock::GetGPUTick() const {
+    return MultiplyHigh(GetUptime(), gputick_cntfrq_factor);
+}
+
+s64 NativeClock::GetUptime() const {
+    s64 cntvct_el0 = 0;
+    asm volatile("dsb ish\n\t"
+                 "mrs %[cntvct_el0], cntvct_el0\n\t"
+                 "dsb ish\n\t"
+                 : [cntvct_el0] "=r"(cntvct_el0));
+    return cntvct_el0;
+}
+
+bool NativeClock::IsNative() const {
+    return true;
+}
+
+s64 NativeClock::GetHostCNTFRQ() {
+    u64 cntfrq_el0 = 0;
+    std::string_view board{""};
+#ifdef ANDROID
+    char buffer[PROP_VALUE_MAX];
+    int len{__system_property_get("ro.product.board", buffer)};
+    board = std::string_view(buffer, static_cast<size_t>(len));
+#endif
+    if (board == "s5e9925") { // Exynos 2200
+        cntfrq_el0 = 25600000;
+    } else if (board == "exynos2100") { // Exynos 2100
+        cntfrq_el0 = 26000000;
+    } else if (board == "exynos9810") { // Exynos 9810
+        cntfrq_el0 = 26000000;
+    } else if (board == "s5e8825") { // Exynos 1280
+        cntfrq_el0 = 26000000;
+    } else {
+        asm("mrs %[cntfrq_el0], cntfrq_el0" : [cntfrq_el0] "=r"(cntfrq_el0));
+    }
+    return cntfrq_el0;
+}
+
+} // namespace Common::Arm64
@@ -0,0 +1,45 @@
+// SPDX-FileCopyrightText: Copyright 2023 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "common/wall_clock.h"
+
+namespace Common::Arm64 {
+
+class NativeClock final : public WallClock {
+public:
+    explicit NativeClock();
+
+    std::chrono::nanoseconds GetTimeNS() const override;
+
+    std::chrono::microseconds GetTimeUS() const override;
+
+    std::chrono::milliseconds GetTimeMS() const override;
+
+    s64 GetCNTPCT() const override;
+
+    s64 GetGPUTick() const override;
+
+    s64 GetUptime() const override;
+
+    bool IsNative() const override;
+
+    static s64 GetHostCNTFRQ();
+
+public:
+    using FactorType = unsigned __int128;
+
+    FactorType GetGuestCNTFRQFactor() const {
+        return guest_cntfrq_factor;
+    }
+
+private:
+    FactorType ns_cntfrq_factor;
+    FactorType us_cntfrq_factor;
+    FactorType ms_cntfrq_factor;
+    FactorType guest_cntfrq_factor;
+    FactorType gputick_cntfrq_factor;
+};
+
+} // namespace Common::Arm64
@@ -7,25 +7,18 @@
 #include <vector>

 #include "common/assert.h"
-#include "common/bit_util.h"
 #include "common/fs/file.h"
 #include "common/fs/fs.h"
-#include "common/fs/fs_types.h"
 #ifdef ANDROID
 #include "common/fs/fs_android.h"
 #endif
 #include "common/logging.h"
-#include "common/literals.h"

 #ifdef _WIN32
 #include <io.h>
 #include <share.h>
-#include <windows.h>
 #else
 #include <unistd.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <fcntl.h>
 #endif

 #ifdef _MSC_VER
@@ -43,13 +36,13 @@ namespace {
 #ifdef _WIN32

 /**
-* Converts the file access mode and file type enums to a file access mode wide string.
-*
-* @param mode File access mode
-* @param type File type
-*
-* @returns A pointer to a wide string representing the file access mode.
-*/
+ * Converts the file access mode and file type enums to a file access mode wide string.
+ *
+ * @param mode File access mode
+ * @param type File type
+ *
+ * @returns A pointer to a wide string representing the file access mode.
+ */
 [[nodiscard]] constexpr const wchar_t* AccessModeToWStr(FileAccessMode mode, FileType type) {
    switch (type) {
    case FileType::BinaryFile:
@@ -86,12 +79,12 @@ namespace {
 }

 /**
-* Converts the file-share access flag enum to a Windows defined file-share access flag.
-*
-* @param flag File-share access flag
-*
-* @returns Windows defined file-share access flag.
-*/
+ * Converts the file-share access flag enum to a Windows defined file-share access flag.
+ *
+ * @param flag File-share access flag
+ *
+ * @returns Windows defined file-share access flag.
+ */
 [[nodiscard]] constexpr int ToWindowsFileShareFlag(FileShareFlag flag) {
    switch (flag) {
    case FileShareFlag::ShareNone:
@@ -109,13 +102,13 @@ namespace {
 #else

 /**
-* Converts the file access mode and file type enums to a file access mode string.
-*
-* @param mode File access mode
-* @param type File type
-*
-* @returns A pointer to a string representing the file access mode.
-*/
+ * Converts the file access mode and file type enums to a file access mode string.
+ *
+ * @param mode File access mode
+ * @param type File type
+ *
+ * @returns A pointer to a string representing the file access mode.
+ */
 [[nodiscard]] constexpr const char* AccessModeToStr(FileAccessMode mode, FileType type) {
    switch (type) {
    case FileType::BinaryFile:
@@ -154,12 +147,12 @@ namespace {
 #endif

 /**
-* Converts the seek origin enum to a seek origin integer.
-*
-* @param origin Seek origin
-*
-* @returns Seek origin integer.
-*/
+ * Converts the seek origin enum to a seek origin integer.
+ *
+ * @param origin Seek origin
+ *
+ * @returns Seek origin integer.
+ */
 [[nodiscard]] constexpr int ToSeekOrigin(SeekOrigin origin) {
    switch (origin) {
    case SeekOrigin::SetOrigin:
@@ -185,7 +178,7 @@ std::string ReadStringFromFile(const std::filesystem::path& path, FileType type)
 }

 size_t WriteStringToFile(const std::filesystem::path& path, FileType type,
-                        std::string_view string) {
+                         std::string_view string) {
    if (Exists(path) && !IsFile(path)) {
        return 0;
    }
@@ -196,7 +189,7 @@ size_t WriteStringToFile(const std::filesystem::path& path, FileType type,
 }

 size_t AppendStringToFile(const std::filesystem::path& path, FileType type,
-                        std::string_view string) {
+                          std::string_view string) {
    if (Exists(path) && !IsFile(path)) {
        return 0;
    }
@@ -251,189 +244,69 @@ FileType IOFile::GetType() const {
    return file_type;
 }

-#if defined(__unix__)
-static int PlatformMapReadOnly(IOFile& io, const char* path) {
-    io.mmap_fd = open(path, O_RDONLY);
-    if (io.mmap_fd > 0) {
-        struct stat st;
-        fstat(io.mmap_fd, &st);
-        io.mmap_size = st.st_size;
-
-        int map_flags = MAP_PRIVATE;
-#ifdef MAP_PREFAULT_READ
-        // Prefaults reads so the final resulting pagetable from this big stupid mmap()
-        // isn't comically lazily loaded, we just coalesce everything in-place for our
-        // lovely mmap flags; if we didn't prefault the reads the page table will be
-        // constructed in-place (i.e on a read-by-read basis) causing lovely soft-faults
-        // which would nuke any performance gains.
-        //
-        // This of course incurs a cost in the initial mmap(2) call, but that is fine.
-        map_flags |= MAP_PREFAULT_READ;
-#endif
-#ifdef MAP_NOSYNC
-        // This causes physical media to not be synched to our file/memory
-        // This means that if the read-only file is written to, we won't see changes
-        // or we may see changes which are just funnily scattered, in any case
-        // this presumes the files won't be changed during execution
-        //
-        // Do not ever use this on write files (if we ever support that); this will create
-        // a fun amount of fragmentation on the disk.
-        map_flags |= MAP_NOSYNC;
-#endif
-#if defined(NDEBUG) && defined(MAP_NOCORE)
-        map_flags |= MAP_NOCORE;
-#endif
-#ifdef MAP_HUGE_2MB
-        map_flags |= MAP_HUGE_2MB; //2mb pages
-#elif defined(MAP_ALIGNED)
-        // File must be big enough that it's worth to super align. We can't just super-align every
-        // file otherwise we will run out of alignments for actually important files :)
-        // System doesn't guarantee a super alignment, but if it's available it will delete
-        // about 3 layers(?) of the TLB tree for each read/write.
-        // Again the cost of faults may make this negligible gains, but hey, we gotta work
-        // what we gotta work with.
-        map_flags |= MAP_ALIGNED(21); //2^21 = 2mb use 2MB pages
-#endif
-        io.mmap_base = (u8*)mmap(nullptr, io.mmap_size, PROT_READ, map_flags, io.mmap_fd, 0);
-        if (io.mmap_base == MAP_FAILED) {
-            close(io.mmap_fd);
-            io.mmap_fd = -1;
-        } else {
-            using namespace Common::Literals;
-            // For small files it is acceptable to use a full readahead
-            // See https://github.com/torvalds/linux/blob/e80d033851b3bc94c3d254ac66660ddd0a49d72c/include/linux/pagemap.h#L1392
-            if (u64(st.st_size) >= 256_MiB) {
-                posix_madvise(io.mmap_base, io.mmap_size, POSIX_MADV_RANDOM);
-            } else {
-                posix_madvise(io.mmap_base, io.mmap_size, POSIX_MADV_SEQUENTIAL);
-            }
-        }
-    }
-    return io.mmap_fd;
-}
-static void PlatformUnmap(IOFile& io) {
-    if (io.mmap_fd != -1) {
-        munmap(io.mmap_base, io.mmap_size);
-        close(io.mmap_fd);
-        io.mmap_fd = -1;
-    }
-}
-#elif defined(__APPLE__)
-// NO IMPLEMENTATION YET
-#else
-static int PlatformMapReadOnly(IOFile& io, const wchar_t* path) {
-    io.file_handle = CreateFileW(path, GENERIC_READ, FILE_SHARE_READ, nullptr, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL | FILE_FLAG_SEQUENTIAL_SCAN, nullptr);
-    if (HANDLE(io.file_handle) != INVALID_HANDLE_VALUE) {
-        io.mapping_handle = CreateFileMappingW(HANDLE(io.file_handle), nullptr, PAGE_READONLY, 0, 0, nullptr);
-        if (io.mapping_handle) {
-            io.mmap_base = (u8*)MapViewOfFile(HANDLE(io.mapping_handle), FILE_MAP_READ, 0, 0, 0);
-            if (io.mmap_base) {
-                _LARGE_INTEGER pvalue;
-                GetFileSizeEx(io.file_handle, &pvalue);
-                io.mmap_size = uint32_t(pvalue.QuadPart);
-            } else {
-                CloseHandle(io.mapping_handle);
-                CloseHandle(io.file_handle);
-                return -1;
-            }
-        } else {
-            CloseHandle(io.file_handle);
-            return -1;
-        }
-    }
-    return 0;
-}
-static void PlatformUnmap(IOFile& io) {
-    if(io.mapping_handle) {
-        if(io.mmap_base)
-            UnmapViewOfFile(HANDLE(io.mmap_base));
-        CloseHandle(HANDLE(io.mapping_handle));
-    }
-    if(io.file_handle != INVALID_HANDLE_VALUE)
-        CloseHandle(HANDLE(io.file_handle));
-}
-#endif
-
 void IOFile::Open(const fs::path& path, FileAccessMode mode, FileType type, FileShareFlag flag) {
    Close();
+
    file_path = path;
    file_access_mode = mode;
    file_type = type;
+
    errno = 0;
+
 #ifdef _WIN32
-    // TODO: this probably can use better logic but oh well I'm not a windowser
-    file_handle = nullptr;
-    if (type == FileType::BinaryFile && mode == FileAccessMode::Read) {
-        if (PlatformMapReadOnly(*this, path.c_str()) == -1) {
-            LOG_ERROR(Common_Filesystem, "Error mmap'ing file"); //: {}", path.c_str());
-        }
-    }
-    if (file_handle == nullptr) {
-        if (flag != FileShareFlag::ShareNone) {
-            file = _wfsopen(path.c_str(), AccessModeToWStr(mode, type), ToWindowsFileShareFlag(flag));
-        } else {
-            _wfopen_s(&file, path.c_str(), AccessModeToWStr(mode, type));
-        }
+    if (flag != FileShareFlag::ShareNone) {
+        file = _wfsopen(path.c_str(), AccessModeToWStr(mode, type), ToWindowsFileShareFlag(flag));
+    } else {
+        _wfopen_s(&file, path.c_str(), AccessModeToWStr(mode, type));
    }
 #elif ANDROID
    if (Android::IsContentUri(path)) {
        ASSERT_MSG(mode == FileAccessMode::Read, "Content URI file access is for read-only!");
-        if (PlatformMapReadOnly(*this, path.c_str()) == -1) {
-            LOG_ERROR(Common_Filesystem, "Error mmap'ing file: {}", path.c_str());
-            int const fd = Android::OpenContentUri(path, Android::OpenMode::Read);
-            if (fd != -1) {
-                file = fdopen(fd, "r");
-                if (errno != 0 && file == nullptr)
-                    LOG_ERROR(Common_Filesystem, "Error opening file: {}, error: {}", path.c_str(), strerror(errno));
-            } else {
-                LOG_ERROR(Common_Filesystem, "Error opening file: {}", path.c_str());
+        const auto fd = Android::OpenContentUri(path, Android::OpenMode::Read);
+        if (fd != -1) {
+            file = fdopen(fd, "r");
+            const auto error_num = errno;
+            if (error_num != 0 && file == nullptr) {
+                LOG_ERROR(Common_Filesystem, "Error opening file: {}, error: {}", path.c_str(),
+                          strerror(error_num));
            }
+        } else {
+            LOG_ERROR(Common_Filesystem, "Error opening file: {}", path.c_str());
        }
    } else {
        file = std::fopen(path.c_str(), AccessModeToStr(mode, type));
    }
-#elif defined(__HAIKU__) || defined(__managarm__) || defined(__OPENORBIS__) || defined(__APPLE__)
-    file = std::fopen(path.c_str(), AccessModeToStr(mode, type));
-#elif defined(__unix__)
-    if (type == FileType::BinaryFile && mode == FileAccessMode::Read) {
-        if (PlatformMapReadOnly(*this, path.c_str()) == -1) {
-            LOG_ERROR(Common_Filesystem, "Error mmap'ing file: {}", path.c_str());
-        }
-    }
-    if (mmap_fd == -1) {
-        file = std::fopen(path.c_str(), AccessModeToStr(mode, type)); // mmap(2) failed or simply we can't use it
-    }
 #else
-    // Some other fancy OS (ahem fucking Darwin/Mac OSX)
    file = std::fopen(path.c_str(), AccessModeToStr(mode, type));
 #endif
+
    if (!IsOpen()) {
        const auto ec = std::error_code{errno, std::generic_category()};
        LOG_ERROR(Common_Filesystem, "Failed to open the file at path={}, ec_message={}",
-            PathToUTF8String(file_path), ec.message());
+                  PathToUTF8String(file_path), ec.message());
    }
 }

 void IOFile::Close() {
-#if defined(__APPLE__)
-    // NO IMPLEMENTATION YET
-#else
-    PlatformUnmap(*this);
-#endif
-    if (file) {
-        errno = 0;
-        const auto close_result = std::fclose(file) == 0;
-        if (!close_result) {
-            const auto ec = std::error_code{errno, std::generic_category()};
-            LOG_ERROR(Common_Filesystem, "Failed to close the file at path={}, ec_message={}",
-                PathToUTF8String(file_path), ec.message());
-        }
-        file = nullptr;
+    if (!IsOpen()) {
+        return;
    }
+
+    errno = 0;
+
+    const auto close_result = std::fclose(file) == 0;
+
+    if (!close_result) {
+        const auto ec = std::error_code{errno, std::generic_category()};
+        LOG_ERROR(Common_Filesystem, "Failed to close the file at path={}, ec_message={}",
+                  PathToUTF8String(file_path), ec.message());
+    }
+
+    file = nullptr;
 }

 bool IOFile::IsOpen() const {
-    return file != nullptr || IsMappedFile();
+    return file != nullptr;
 }

 std::string IOFile::ReadString(size_t length) const {
@@ -450,132 +323,137 @@ size_t IOFile::WriteString(std::span<const char> string) const {
 }

 bool IOFile::Flush() const {
-    ASSERT(!IsMappedFile());
-    if (file) {
-        errno = 0;
-        auto const flush_result = std::fflush(file) == 0;
-        if (!flush_result) {
-            const auto ec = std::error_code{errno, std::generic_category()};
-            LOG_ERROR(Common_Filesystem, "Failed to flush the file at path={}, ec_message={}",
-                PathToUTF8String(file_path), ec.message());
-        }
-        return flush_result;
+    if (!IsOpen()) {
+        return false;
    }
-    return false;
+
+    errno = 0;
+
+#ifdef _WIN32
+    const auto flush_result = std::fflush(file) == 0;
+#else
+    const auto flush_result = std::fflush(file) == 0;
+#endif
+
+    if (!flush_result) {
+        const auto ec = std::error_code{errno, std::generic_category()};
+        LOG_ERROR(Common_Filesystem, "Failed to flush the file at path={}, ec_message={}",
+                  PathToUTF8String(file_path), ec.message());
+    }
+
+    return flush_result;
 }

 bool IOFile::Commit() const {
-    ASSERT(!IsMappedFile());
-    if (file) {
-        errno = 0;
-#ifdef _WIN32
-        const auto commit_result = std::fflush(file) == 0 && _commit(fileno(file)) == 0;
-#else
-        const auto commit_result = std::fflush(file) == 0 && fsync(fileno(file)) == 0;
-#endif
-        if (!commit_result) {
-            const auto ec = std::error_code{errno, std::generic_category()};
-            LOG_ERROR(Common_Filesystem, "Failed to commit the file at path={}, ec_message={}",
-                PathToUTF8String(file_path), ec.message());
-        }
-        return commit_result;
+    if (!IsOpen()) {
+        return false;
    }
-    return false;
+
+    errno = 0;
+
+#ifdef _WIN32
+    const auto commit_result = std::fflush(file) == 0 && _commit(fileno(file)) == 0;
+#else
+    const auto commit_result = std::fflush(file) == 0 && fsync(fileno(file)) == 0;
+#endif
+
+    if (!commit_result) {
+        const auto ec = std::error_code{errno, std::generic_category()};
+        LOG_ERROR(Common_Filesystem, "Failed to commit the file at path={}, ec_message={}",
+                  PathToUTF8String(file_path), ec.message());
+    }
+
+    return commit_result;
 }

 bool IOFile::SetSize(u64 size) const {
-    ASSERT(!IsMappedFile());
-    if (file) {
-        errno = 0;
-#ifdef _WIN32
-        const auto set_size_result = _chsize_s(fileno(file), s64(size)) == 0;
-#else
-        const auto set_size_result = ftruncate(fileno(file), s64(size)) == 0;
-#endif
-        if (!set_size_result) {
-            const auto ec = std::error_code{errno, std::generic_category()};
-            LOG_ERROR(Common_Filesystem, "Failed to resize the file at path={}, size={}, ec_message={}",
-                PathToUTF8String(file_path), size, ec.message());
-        }
-        return set_size_result;
+    if (!IsOpen()) {
+        return false;
    }
-    return false;
+
+    errno = 0;
+
+#ifdef _WIN32
+    const auto set_size_result = _chsize_s(fileno(file), static_cast<s64>(size)) == 0;
+#else
+    const auto set_size_result = ftruncate(fileno(file), static_cast<s64>(size)) == 0;
+#endif
+
+    if (!set_size_result) {
+        const auto ec = std::error_code{errno, std::generic_category()};
+        LOG_ERROR(Common_Filesystem, "Failed to resize the file at path={}, size={}, ec_message={}",
+                  PathToUTF8String(file_path), size, ec.message());
+    }
+
+    return set_size_result;
 }

 u64 IOFile::GetSize() const {
-    if (IsMappedFile())
-        return mmap_size;
-    if (file) {
-        // Flush any unwritten buffered data into the file prior to retrieving the file mmap_size.
-        std::fflush(file);
+    if (!IsOpen()) {
+        return 0;
+    }
+
+    // Flush any unwritten buffered data into the file prior to retrieving the file size.
+    std::fflush(file);
+
 #if ANDROID
-        u64 file_size = 0;
-        if (Android::IsContentUri(file_path)) {
-            file_size = Android::GetSize(file_path);
-        } else {
-            std::error_code ec;
-
-            file_size = fs::file_size(file_path, ec);
-
-            if (ec) {
-                LOG_ERROR(Common_Filesystem, "Failed to retrieve the file mmap_size of path={}, ec_message={}",
-                    PathToUTF8String(file_path), ec.message());
-                return 0;
-            }
-        }
-#else
+    u64 file_size = 0;
+    if (Android::IsContentUri(file_path)) {
+        file_size = Android::GetSize(file_path);
+    } else {
        std::error_code ec;
-        auto const file_size = fs::file_size(file_path, ec);
+
+        file_size = fs::file_size(file_path, ec);
+
        if (ec) {
-            LOG_ERROR(Common_Filesystem, "Failed to retrieve the file mmap_size of path={}, ec_message={}",
-                PathToUTF8String(file_path), ec.message());
+            LOG_ERROR(Common_Filesystem,
+                      "Failed to retrieve the file size of path={}, ec_message={}",
+                      PathToUTF8String(file_path), ec.message());
            return 0;
        }
-#endif
-        return file_size;
    }
-    return 0;
+#else
+    std::error_code ec;
+
+    const auto file_size = fs::file_size(file_path, ec);
+
+    if (ec) {
+        LOG_ERROR(Common_Filesystem, "Failed to retrieve the file size of path={}, ec_message={}",
+                  PathToUTF8String(file_path), ec.message());
+        return 0;
+    }
+#endif
+
+    return file_size;
 }

 bool IOFile::Seek(s64 offset, SeekOrigin origin) const {
-    if (IsMappedFile()) {
-        // fuck you to whoever made this method const
-        switch (origin) {
-        case SeekOrigin::SetOrigin:
-            mmap_offset = s64(offset);
-            break;
-        case SeekOrigin::CurrentPosition:
-            mmap_offset += s64(offset);
-            break;
-        case SeekOrigin::End:
-            mmap_offset = s64(mmap_size) + s64(offset);
-            break;
-        }
-        return true;
+    if (!IsOpen()) {
+        return false;
    }
-    if (file) {
-        errno = 0;
-        const auto seek_result = fseeko(file, offset, ToSeekOrigin(origin)) == 0;
-        if (!seek_result) {
-            const auto ec = std::error_code{errno, std::generic_category()};
-            LOG_ERROR(Common_Filesystem, "Failed to seek the file at path={}, offset={}, origin={}, ec_message={}",
-                PathToUTF8String(file_path), offset, origin, ec.message());
-        }
-        return seek_result;
+
+    errno = 0;
+
+    const auto seek_result = fseeko(file, offset, ToSeekOrigin(origin)) == 0;
+
+    if (!seek_result) {
+        const auto ec = std::error_code{errno, std::generic_category()};
+        LOG_ERROR(Common_Filesystem,
+                  "Failed to seek the file at path={}, offset={}, origin={}, ec_message={}",
+                  PathToUTF8String(file_path), offset, origin, ec.message());
    }
-    return false;
+
+    return seek_result;
 }

 s64 IOFile::Tell() const {
-    if (IsMappedFile()) {
-        errno = 0;
-        return s64(mmap_offset);
+    if (!IsOpen()) {
+        return 0;
    }
-    if (file) {
-        errno = 0;
-        return ftello(file);
-    }
-    return 0;
+
+    errno = 0;
+
+    return ftello(file);
 }

 } // namespace Common::FS
@@ -1,13 +1,9 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: Copyright 2021 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later

 #pragma once

 #include <cstdio>
-#include <cstring>
 #include <filesystem>
 #include <span>
 #include <type_traits>
@@ -25,12 +21,12 @@ enum class SeekOrigin {
 };

 /**
-* Opens a file stream at path with the specified open mode.
-*
-* @param file_stream Reference to file stream
-* @param path Filesystem path
-* @param open_mode File stream open mode
-*/
+ * Opens a file stream at path with the specified open mode.
+ *
+ * @param file_stream Reference to file stream
+ * @param path Filesystem path
+ * @param open_mode File stream open mode
+ */
 template <typename FileStream>
 void OpenFileStream(FileStream& file_stream, const std::filesystem::path& path,
                    std::ios_base::openmode open_mode) {
@@ -49,14 +45,14 @@ void OpenFileStream(FileStream& file_stream, const Path& path, std::ios_base::op
 #endif

 /**
-* Reads an entire file at path and returns a string of the contents read from the file.
-* If the filesystem object at path is not a regular file, this function returns an empty string.
-*
-* @param path Filesystem path
-* @param type File type
-*
-* @returns A string of the contents read from the file.
-*/
+ * Reads an entire file at path and returns a string of the contents read from the file.
+ * If the filesystem object at path is not a regular file, this function returns an empty string.
+ *
+ * @param path Filesystem path
+ * @param type File type
+ *
+ * @returns A string of the contents read from the file.
+ */
 [[nodiscard]] std::string ReadStringFromFile(const std::filesystem::path& path, FileType type);

 #ifdef _WIN32
@@ -71,18 +67,18 @@ template <typename Path>
 #endif

 /**
-* Writes a string to a file at path and returns the number of characters successfully written.
-* If a file already exists at path, its contents will be erased.
-* If a file does not exist at path, it creates and opens a new empty file for writing.
-* If the filesystem object at path exists and is not a regular file, this function returns 0.
-*
-* @param path Filesystem path
-* @param type File type
-*
-* @returns Number of characters successfully written.
-*/
+ * Writes a string to a file at path and returns the number of characters successfully written.
+ * If a file already exists at path, its contents will be erased.
+ * If a file does not exist at path, it creates and opens a new empty file for writing.
+ * If the filesystem object at path exists and is not a regular file, this function returns 0.
+ *
+ * @param path Filesystem path
+ * @param type File type
+ *
+ * @returns Number of characters successfully written.
+ */
 [[nodiscard]] size_t WriteStringToFile(const std::filesystem::path& path, FileType type,
-                                    std::string_view string);
+                                       std::string_view string);

 #ifdef _WIN32
 template <typename Path>
@@ -96,15 +92,15 @@ template <typename Path>
 #endif

 /**
-* Appends a string to a file at path and returns the number of characters successfully written.
-* If a file does not exist at path, it creates and opens a new empty file for appending.
-* If the filesystem object at path exists and is not a regular file, this function returns 0.
-*
-* @param path Filesystem path
-* @param type File type
-*
-* @returns Number of characters successfully written.
-*/
+ * Appends a string to a file at path and returns the number of characters successfully written.
+ * If a file does not exist at path, it creates and opens a new empty file for appending.
+ * If the filesystem object at path exists and is not a regular file, this function returns 0.
+ *
+ * @param path Filesystem path
+ * @param type File type
+ *
+ * @returns Number of characters successfully written.
+ */
 [[nodiscard]] size_t AppendStringToFile(const std::filesystem::path& path, FileType type,
                                        std::string_view string);

@@ -132,14 +128,14 @@ public:
                    FileShareFlag flag = FileShareFlag::ShareReadOnly);

    /**
-    * An IOFile is a lightweight wrapper on C Library file operations.
-    * Automatically closes an open file on the destruction of an IOFile object.
-    *
-    * @param path Filesystem path
-    * @param mode File access mode
-    * @param type File type, default is BinaryFile. Use TextFile to open the file as a text file
-    * @param flag (Windows only) File-share access flag, default is ShareReadOnly
-    */
+     * An IOFile is a lightweight wrapper on C Library file operations.
+     * Automatically closes an open file on the destruction of an IOFile object.
+     *
+     * @param path Filesystem path
+     * @param mode File access mode
+     * @param type File type, default is BinaryFile. Use TextFile to open the file as a text file
+     * @param flag (Windows only) File-share access flag, default is ShareReadOnly
+     */
    explicit IOFile(const std::filesystem::path& path, FileAccessMode mode,
                    FileType type = FileType::BinaryFile,
                    FileShareFlag flag = FileShareFlag::ShareReadOnly);
@@ -153,70 +149,84 @@ public:
    IOFile& operator=(IOFile&& other) noexcept;

    /**
-    * Gets the path of the file.
-    *
-    * @returns The path of the file.
-    */
+     * Gets the path of the file.
+     *
+     * @returns The path of the file.
+     */
    [[nodiscard]] std::filesystem::path GetPath() const;

    /**
-    * Gets the access mode of the file.
-    *
-    * @returns The access mode of the file.
-    */
+     * Gets the access mode of the file.
+     *
+     * @returns The access mode of the file.
+     */
    [[nodiscard]] FileAccessMode GetAccessMode() const;

    /**
-    * Gets the type of the file.
-    *
-    * @returns The type of the file.
-    */
+     * Gets the type of the file.
+     *
+     * @returns The type of the file.
+     */
    [[nodiscard]] FileType GetType() const;

    /**
-    * Opens a file at path with the specified file access mode.
-    * This function behaves differently depending on the FileAccessMode.
-    * These behaviors are documented in each enum value of FileAccessMode.
-    *
-    * @param path Filesystem path
-    * @param mode File access mode
-    * @param type File type, default is BinaryFile. Use TextFile to open the file as a text file
-    * @param flag (Windows only) File-share access flag, default is ShareReadOnly
-    */
+     * Opens a file at path with the specified file access mode.
+     * This function behaves differently depending on the FileAccessMode.
+     * These behaviors are documented in each enum value of FileAccessMode.
+     *
+     * @param path Filesystem path
+     * @param mode File access mode
+     * @param type File type, default is BinaryFile. Use TextFile to open the file as a text file
+     * @param flag (Windows only) File-share access flag, default is ShareReadOnly
+     */
    void Open(const std::filesystem::path& path, FileAccessMode mode,
-            FileType type = FileType::BinaryFile,
-            FileShareFlag flag = FileShareFlag::ShareReadOnly);
+              FileType type = FileType::BinaryFile,
+              FileShareFlag flag = FileShareFlag::ShareReadOnly);
+
+// #ifdef _WIN32
+//     template <typename Path>
+//     void Open(const Path& path, FileAccessMode mode, FileType type = FileType::BinaryFile,
+//               FileShareFlag flag = FileShareFlag::ShareReadOnly) {
+//         using ValueType = typename Path::value_type;
+//         if constexpr (IsChar<ValueType>) {
+//             Open(ToU8String(path), mode, type, flag);
+//         } else {
+//             Open(std::filesystem::path{path}, mode, type, flag);
+//         }
+//     }
+// #endif

    /// Closes the file if it is opened.
    void Close();

    /**
-    * Checks whether the file is open.
-    * Use this to check whether the calls to Open() or Close() succeeded.
-    *
-    * @returns True if the file is open, false otherwise.
-    */
+     * Checks whether the file is open.
+     * Use this to check whether the calls to Open() or Close() succeeded.
+     *
+     * @returns True if the file is open, false otherwise.
+     */
    [[nodiscard]] bool IsOpen() const;

    /**
-    * Helper function which deduces the value type of a contiguous STL container used in ReadSpan.
-    * If T is not a contiguous container as defined by the concept IsContiguousContainer, this
-    * calls ReadObject and T must be a trivially copyable object.
-    *
-    * See ReadSpan for more details if T is a contiguous container.
-    * See ReadObject for more details if T is a trivially copyable object.
-    *
-    * @tparam T Contiguous container or trivially copyable object
-    *
-    * @param data Container of T::value_type data or reference to object
-    *
-    * @returns Count of T::value_type data or objects successfully read.
-    */
+     * Helper function which deduces the value type of a contiguous STL container used in ReadSpan.
+     * If T is not a contiguous container as defined by the concept IsContiguousContainer, this
+     * calls ReadObject and T must be a trivially copyable object.
+     *
+     * See ReadSpan for more details if T is a contiguous container.
+     * See ReadObject for more details if T is a trivially copyable object.
+     *
+     * @tparam T Contiguous container or trivially copyable object
+     *
+     * @param data Container of T::value_type data or reference to object
+     *
+     * @returns Count of T::value_type data or objects successfully read.
+     */
    template <typename T>
    [[nodiscard]] size_t Read(T& data) const {
        if constexpr (IsContiguousContainer<T>) {
            using ContiguousType = typename T::value_type;
-            static_assert(std::is_trivially_copyable_v<ContiguousType>, "Data type must be trivially copyable.");
+            static_assert(std::is_trivially_copyable_v<ContiguousType>,
+                          "Data type must be trivially copyable.");
            return ReadSpan<ContiguousType>(data);
        } else {
            return ReadObject(data) ? 1 : 0;
@@ -224,24 +234,25 @@ public:
    }

    /**
-    * Helper function which deduces the value type of a contiguous STL container used in WriteSpan.
-    * If T is not a contiguous STL container as defined by the concept IsContiguousContainer, this
-    * calls WriteObject and T must be a trivially copyable object.
-    *
-    * See WriteSpan for more details if T is a contiguous container.
-    * See WriteObject for more details if T is a trivially copyable object.
-    *
-    * @tparam T Contiguous container or trivially copyable object
-    *
-    * @param data Container of T::value_type data or const reference to object
-    *
-    * @returns Count of T::value_type data or objects successfully written.
-    */
+     * Helper function which deduces the value type of a contiguous STL container used in WriteSpan.
+     * If T is not a contiguous STL container as defined by the concept IsContiguousContainer, this
+     * calls WriteObject and T must be a trivially copyable object.
+     *
+     * See WriteSpan for more details if T is a contiguous container.
+     * See WriteObject for more details if T is a trivially copyable object.
+     *
+     * @tparam T Contiguous container or trivially copyable object
+     *
+     * @param data Container of T::value_type data or const reference to object
+     *
+     * @returns Count of T::value_type data or objects successfully written.
+     */
    template <typename T>
    [[nodiscard]] size_t Write(const T& data) const {
        if constexpr (IsContiguousContainer<T>) {
            using ContiguousType = typename T::value_type;
-            static_assert(std::is_trivially_copyable_v<ContiguousType>, "Data type must be trivially copyable.");
+            static_assert(std::is_trivially_copyable_v<ContiguousType>,
+                          "Data type must be trivially copyable.");
            return WriteSpan<ContiguousType>(data);
        } else {
            static_assert(std::is_trivially_copyable_v<T>, "Data type must be trivially copyable.");
@@ -250,219 +261,199 @@ public:
    }

    /**
-    * Reads a span of T data from a file sequentially.
-    * This function reads from the current position of the file pointer and
-    * advances it by the (count of T * sizeof(T)) bytes successfully read.
-    *
-    * Failures occur when:
-    * - The file is not open
-    * - The opened file lacks read permissions
-    * - Attempting to read beyond the end-of-file
-    *
-    * @tparam T Data type
-    *
-    * @param data Span of T data
-    *
-    * @returns Count of T data successfully read.
-    */
+     * Reads a span of T data from a file sequentially.
+     * This function reads from the current position of the file pointer and
+     * advances it by the (count of T * sizeof(T)) bytes successfully read.
+     *
+     * Failures occur when:
+     * - The file is not open
+     * - The opened file lacks read permissions
+     * - Attempting to read beyond the end-of-file
+     *
+     * @tparam T Data type
+     *
+     * @param data Span of T data
+     *
+     * @returns Count of T data successfully read.
+     */
    template <typename T>
    [[nodiscard]] size_t ReadSpan(std::span<T> data) const {
        static_assert(std::is_trivially_copyable_v<T>, "Data type must be trivially copyable.");
-        if (IsMappedFile()) {
-            std::memcpy(data.data(), mmap_base + mmap_offset, sizeof(T) * data.size());
-            return data.size();
+
+        if (!IsOpen()) {
+            return 0;
        }
-        return IsOpen() ? std::fread(data.data(), sizeof(T), data.size(), file) : 0;
+
+        return std::fread(data.data(), sizeof(T), data.size(), file);
    }

    /**
-    * Writes a span of T data to a file sequentially.
-    * This function writes from the current position of the file pointer and
-    * advances it by the (count of T * sizeof(T)) bytes successfully written.
-    *
-    * Failures occur when:
-    * - The file is not open
-    * - The opened file lacks write permissions
-    *
-    * @tparam T Data type
-    *
-    * @param data Span of T data
-    *
-    * @returns Count of T data successfully written.
-    */
+     * Writes a span of T data to a file sequentially.
+     * This function writes from the current position of the file pointer and
+     * advances it by the (count of T * sizeof(T)) bytes successfully written.
+     *
+     * Failures occur when:
+     * - The file is not open
+     * - The opened file lacks write permissions
+     *
+     * @tparam T Data type
+     *
+     * @param data Span of T data
+     *
+     * @returns Count of T data successfully written.
+     */
    template <typename T>
    [[nodiscard]] size_t WriteSpan(std::span<const T> data) const {
        static_assert(std::is_trivially_copyable_v<T>, "Data type must be trivially copyable.");
-        if (IsMappedFile()) {
-            std::memcpy(mmap_base + mmap_offset, data.data(), sizeof(T) * data.size());
-            return data.size();
+
+        if (!IsOpen()) {
+            return 0;
        }
-        return IsOpen() ? std::fwrite(data.data(), sizeof(T), data.size(), file) : 0;
+
+        return std::fwrite(data.data(), sizeof(T), data.size(), file);
    }

    /**
-    * Reads a T object from a file sequentially.
-    * This function reads from the current position of the file pointer and
-    * advances it by the sizeof(T) bytes successfully read.
-    *
-    * Failures occur when:
-    * - The file is not open
-    * - The opened file lacks read permissions
-    * - Attempting to read beyond the end-of-file
-    *
-    * @tparam T Data type
-    *
-    * @param object Reference to object
-    *
-    * @returns True if the object is successfully read from the file, false otherwise.
-    */
+     * Reads a T object from a file sequentially.
+     * This function reads from the current position of the file pointer and
+     * advances it by the sizeof(T) bytes successfully read.
+     *
+     * Failures occur when:
+     * - The file is not open
+     * - The opened file lacks read permissions
+     * - Attempting to read beyond the end-of-file
+     *
+     * @tparam T Data type
+     *
+     * @param object Reference to object
+     *
+     * @returns True if the object is successfully read from the file, false otherwise.
+     */
    template <typename T>
    [[nodiscard]] bool ReadObject(T& object) const {
        static_assert(std::is_trivially_copyable_v<T>, "Data type must be trivially copyable.");
        static_assert(!std::is_pointer_v<T>, "T must not be a pointer to an object.");
-        if (IsMappedFile()) {
-            std::memcpy(&object, mmap_base + mmap_offset, sizeof(T));
-#ifdef _WIN32
-            return bool(sizeof(T));
-#else
-            return sizeof(T);
-#endif
+
+        if (!IsOpen()) {
+            return false;
        }
-        return IsOpen() ? std::fread(&object, sizeof(T), 1, file) == 1 : false;
+
+        return std::fread(&object, sizeof(T), 1, file) == 1;
    }

    /**
-    * Writes a T object to a file sequentially.
-    * This function writes from the current position of the file pointer and
-    * advances it by the sizeof(T) bytes successfully written.
-    *
-    * Failures occur when:
-    * - The file is not open
-    * - The opened file lacks write permissions
-    *
-    * @tparam T Data type
-    *
-    * @param object Const reference to object
-    *
-    * @returns True if the object is successfully written to the file, false otherwise.
-    */
+     * Writes a T object to a file sequentially.
+     * This function writes from the current position of the file pointer and
+     * advances it by the sizeof(T) bytes successfully written.
+     *
+     * Failures occur when:
+     * - The file is not open
+     * - The opened file lacks write permissions
+     *
+     * @tparam T Data type
+     *
+     * @param object Const reference to object
+     *
+     * @returns True if the object is successfully written to the file, false otherwise.
+     */
    template <typename T>
    [[nodiscard]] bool WriteObject(const T& object) const {
        static_assert(std::is_trivially_copyable_v<T>, "Data type must be trivially copyable.");
        static_assert(!std::is_pointer_v<T>, "T must not be a pointer to an object.");
-        if (IsMappedFile()) {
-            std::memcpy(mmap_base + mmap_offset, &object, sizeof(T));
-#ifdef _WIN32
-            return sizeof(T) != 0;
-#else
-            return sizeof(T);
-#endif
+
+        if (!IsOpen()) {
+            return false;
        }
-        return IsOpen() ? std::fwrite(&object, sizeof(T), 1, file) == 1 : false;
+
+        return std::fwrite(&object, sizeof(T), 1, file) == 1;
    }

    /**
-    * Specialized function to read a string of a given length from a file sequentially.
-    * This function writes from the current position of the file pointer and
-    * advances it by the number of characters successfully read.
-    * The size of the returned string may not match length if not all bytes are successfully read.
-    *
-    * @param length Length of the string
-    *
-    * @returns A string read from the file.
-    */
+     * Specialized function to read a string of a given length from a file sequentially.
+     * This function writes from the current position of the file pointer and
+     * advances it by the number of characters successfully read.
+     * The size of the returned string may not match length if not all bytes are successfully read.
+     *
+     * @param length Length of the string
+     *
+     * @returns A string read from the file.
+     */
    [[nodiscard]] std::string ReadString(size_t length) const;

    /**
-    * Specialized function to write a string to a file sequentially.
-    * This function writes from the current position of the file pointer and
-    * advances it by the number of characters successfully written.
-    *
-    * @param string Span of const char backed std::string or std::string_view
-    *
-    * @returns Number of characters successfully written.
-    */
+     * Specialized function to write a string to a file sequentially.
+     * This function writes from the current position of the file pointer and
+     * advances it by the number of characters successfully written.
+     *
+     * @param string Span of const char backed std::string or std::string_view
+     *
+     * @returns Number of characters successfully written.
+     */
    [[nodiscard]] size_t WriteString(std::span<const char> string) const;

    /**
-    * Attempts to flush any unwritten buffered data into the file.
-    *
-    * @returns True if the flush was successful, false otherwise.
-    */
+     * Attempts to flush any unwritten buffered data into the file.
+     *
+     * @returns True if the flush was successful, false otherwise.
+     */
    bool Flush() const;

    /**
-    * Attempts to commit the file into the disk.
-    * Note that this is an expensive operation as this forces the operating system to write
-    * the contents of the file associated with the file descriptor into the disk.
-    *
-    * @returns True if the commit was successful, false otherwise.
-    */
+     * Attempts to commit the file into the disk.
+     * Note that this is an expensive operation as this forces the operating system to write
+     * the contents of the file associated with the file descriptor into the disk.
+     *
+     * @returns True if the commit was successful, false otherwise.
+     */
    bool Commit() const;

    /**
-    * Resizes the file to a given size.
-    * If the file is resized to a smaller size, the remainder of the file is discarded.
-    * If the file is resized to a larger size, the new area appears as if zero-filled.
-    *
-    * Failures occur when:
-    * - The file is not open
-    *
-    * @param size File size in bytes
-    *
-    * @returns True if the file resize succeeded, false otherwise.
-    */
+     * Resizes the file to a given size.
+     * If the file is resized to a smaller size, the remainder of the file is discarded.
+     * If the file is resized to a larger size, the new area appears as if zero-filled.
+     *
+     * Failures occur when:
+     * - The file is not open
+     *
+     * @param size File size in bytes
+     *
+     * @returns True if the file resize succeeded, false otherwise.
+     */
    [[nodiscard]] bool SetSize(u64 size) const;

    /**
-    * Gets the size of the file.
-    *
-    * Failures occur when:
-    * - The file is not open
-    *
-    * @returns The file size in bytes of the file. Returns 0 on failure.
-    */
+     * Gets the size of the file.
+     *
+     * Failures occur when:
+     * - The file is not open
+     *
+     * @returns The file size in bytes of the file. Returns 0 on failure.
+     */
    [[nodiscard]] u64 GetSize() const;

    /**
-    * Moves the current position of the file pointer with the specified offset and seek origin.
-    *
-    * @param offset Offset from seek origin
-    * @param origin Seek origin
-    *
-    * @returns True if the file pointer has moved to the specified offset, false otherwise.
-    */
+     * Moves the current position of the file pointer with the specified offset and seek origin.
+     *
+     * @param offset Offset from seek origin
+     * @param origin Seek origin
+     *
+     * @returns True if the file pointer has moved to the specified offset, false otherwise.
+     */
    [[nodiscard]] bool Seek(s64 offset, SeekOrigin origin = SeekOrigin::SetOrigin) const;

    /**
-    * Gets the current position of the file pointer.
-    *
-    * @returns The current position of the file pointer.
-    */
+     * Gets the current position of the file pointer.
+     *
+     * @returns The current position of the file pointer.
+     */
    [[nodiscard]] s64 Tell() const;

-#ifdef _WIN32
-    inline bool IsMappedFile() const noexcept { return mapping_handle != nullptr; }
-#else // POSIX
-    inline bool IsMappedFile() const noexcept { return mmap_fd != -1; }
-#endif
-
+private:
    std::filesystem::path file_path;
    FileAccessMode file_access_mode{};
    FileType file_type{};
+
    std::FILE* file = nullptr;
-    // Any decent system should have mmap() for files
-    // Systems with artifical mmap() limitations should simply change the logic within file.cpp
-    // and reduce the threshold for which the mmap() is set to
-#ifdef _WIN32
-    void *mapping_handle = nullptr;
-    void *file_handle = nullptr;
-#else // POSIX
-    int mmap_fd = -1;
-#endif
-    u8* mmap_base = nullptr;
-    size_t mmap_size = 0;
-    mutable s64 mmap_offset = 0; // fuck you
 };

 } // namespace Common::FS
@@ -349,8 +349,35 @@ struct Impl {
    // Well, I mean it's the default constructor!
    explicit Impl() noexcept : filter(Level::Trace) {}

-    template<typename F>
-    void ForEachBackend(F&& lambda) noexcept {
+    void StartBackendThread() noexcept {
+        backend_thread = std::jthread([this](std::stop_token stop_token) {
+            Common::SetCurrentThreadName("Logger");
+            Entry entry;
+            const auto write_logs = [this, &entry]() {
+                ForEachBackend([&entry](Backend& backend) {
+                    backend.Write(entry);
+                });
+            };
+            do {
+                message_queue.PopWait(entry, stop_token);
+                write_logs();
+            } while (!stop_token.stop_requested());
+            // Drain the logging queue. Only writes out up to MAX_LOGS_TO_WRITE to prevent a
+            // case where a system is repeatedly spamming logs even on close.
+            int max_logs_to_write = filter.IsDebug() ? INT_MAX : 100;
+            while (max_logs_to_write-- && message_queue.TryPop(entry))
+                write_logs();
+        });
+    }
+
+    void StopBackendThread() noexcept {
+        backend_thread.request_stop();
+        if (backend_thread.joinable())
+            backend_thread.join();
+        ForEachBackend([](Backend& backend) { backend.Flush(); });
+    }
+
+    void ForEachBackend(auto lambda) noexcept {
        lambda(static_cast<Backend&>(color_console_backend));
 #ifndef __OPENORBIS__
        if (file_backend)
@@ -375,7 +402,9 @@ struct Impl {
 #ifdef ANDROID
    LogcatBackend lc_backend{};
 #endif
+    MPSCQueue<Entry> message_queue{};
    std::chrono::steady_clock::time_point time_origin{std::chrono::steady_clock::now()};
+    std::jthread backend_thread;
 };
 } // namespace

@@ -399,11 +428,13 @@ void Initialize() {
 }

 void Start() {
+    if (logging_instance)
+        logging_instance->StartBackendThread();
 }

 void Stop() {
    if (logging_instance)
-        logging_instance->ForEachBackend([](Backend& backend) { backend.Flush(); });
+        logging_instance->StopBackendThread();
 }

 void SetGlobalFilter(const Filter& filter) {
@@ -418,19 +449,14 @@ void SetColorConsoleBackendEnabled(bool enabled) {

 void FmtLogMessageImpl(Class log_class, Level log_level, const char* filename, unsigned int line_num, const char* function, fmt::string_view format, const fmt::format_args& args) {
    if (logging_instance && logging_instance->filter.CheckMessage(log_class, log_level)) {
-        auto const flush = ::Settings::values.log_flush_line.GetValue();
-        logging_instance->ForEachBackend([=](Backend& backend) {
-            backend.Write(Entry{
-                .message = fmt::vformat(format, args),
-                .timestamp = std::chrono::duration_cast<std::chrono::microseconds>(std::chrono::steady_clock::now() - logging_instance->time_origin),
-                .log_class = log_class,
-                .log_level = log_level,
-                .filename = TrimSourcePath(filename),
-                .function = function,
-                .line_num = line_num,
-            });
-            if (flush)
-                backend.Flush();
+        logging_instance->message_queue.EmplaceWait(Entry{
+            .message = fmt::vformat(format, args),
+            .timestamp = std::chrono::duration_cast<std::chrono::microseconds>(std::chrono::steady_clock::now() - logging_instance->time_origin),
+            .log_class = log_class,
+            .log_level = log_level,
+            .filename = TrimSourcePath(filename),
+            .function = function,
+            .line_num = line_num,
        });
    }
 }
@@ -388,13 +388,8 @@ struct Values {
                                                  true,
                                                  true};

-    SwitchableSetting<bool> use_asynchronous_gpu_emulation{linkage,
-#ifdef __ANDROID__
-        false,
-#else
-        true,
-#endif
-        "use_asynchronous_gpu_emulation", Category::Renderer};
+    SwitchableSetting<bool> use_asynchronous_gpu_emulation{
+                                                           linkage, true, "use_asynchronous_gpu_emulation", Category::Renderer};
    // *nix platforms may have issues with the borderless windowed fullscreen mode.
    // Default to exclusive fullscreen on these platforms for now.
    SwitchableSetting<FullscreenMode, true> fullscreen_mode{linkage,
@@ -547,7 +542,7 @@ struct Values {
                                                        true};
    SwitchableSetting<bool> async_presentation{linkage,
 #ifdef ANDROID
-                                               false,
+                                               true,
 #else
                                               false,
 #endif
@@ -559,13 +554,8 @@ struct Values {
    SwitchableSetting<bool> emulate_bgr565{linkage, false, "emulate_bgr565",
                                            Category::RendererHacks};

-    SwitchableSetting<bool> rescale_hack{linkage,
-#ifdef __ANDROID__
-        true,
-#else
-        false,
-#endif
-        "rescale_hack", Category::RendererHacks};
+    SwitchableSetting<bool> rescale_hack{linkage, false, "rescale_hack",
+                                                     Category::RendererHacks};

    SwitchableSetting<bool> use_asynchronous_shaders{linkage, false, "use_asynchronous_shaders",
                                                     Category::RendererHacks};
@@ -1,196 +1,77 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+// SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later

 // SPDX-FileCopyrightText: Copyright 2020 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later

 #include "common/steady_clock.h"
-#include "common/uint128.h"
 #include "common/wall_clock.h"

-#ifdef __ANDROID__
-#include <sys/system_properties.h>
-#endif
 #ifdef ARCHITECTURE_x86_64
 #include "common/x64/cpu_detect.h"
+#include "common/x64/native_clock.h"
 #include "common/x64/rdtsc.h"
 #endif
+#ifdef HAS_NCE
+#include "common/arm64/native_clock.h"
+#endif

 namespace Common {

-#if defined(ARCHITECTURE_x86_64)
-WallClock::WallClock(bool invariant_, u64 rdtsc_frequency_) noexcept
-    : invariant{invariant_}
-    , rdtsc_frequency{rdtsc_frequency_}
-    , ns_rdtsc_factor{GetFixedPoint64Factor(NsRatio::den, rdtsc_frequency_)}
-    , us_rdtsc_factor{GetFixedPoint64Factor(UsRatio::den, rdtsc_frequency_)}
-    , ms_rdtsc_factor{GetFixedPoint64Factor(MsRatio::den, rdtsc_frequency_)}
-    , cntpct_rdtsc_factor{GetFixedPoint64Factor(CNTFRQ, rdtsc_frequency_)}
-    , gputick_rdtsc_factor{GetFixedPoint64Factor(GPUTickFreq, rdtsc_frequency_)}
-{}
+class StandardWallClock final : public WallClock {
+public:
+    explicit StandardWallClock() {}

-std::chrono::nanoseconds WallClock::GetTimeNS() const {
-    if (invariant)
-        return std::chrono::duration_cast<std::chrono::nanoseconds>(std::chrono::system_clock::now().time_since_epoch());
-    return std::chrono::nanoseconds{MultiplyHigh(GetUptime(), ns_rdtsc_factor)};
-}
-
-std::chrono::microseconds WallClock::GetTimeUS() const {
-    if (invariant)
-        return std::chrono::duration_cast<std::chrono::microseconds>(std::chrono::system_clock::now().time_since_epoch());
-    return std::chrono::microseconds{MultiplyHigh(GetUptime(), us_rdtsc_factor)};
-}
-
-std::chrono::milliseconds WallClock::GetTimeMS() const {
-    if (invariant)
-        return std::chrono::duration_cast<std::chrono::milliseconds>(std::chrono::system_clock::now().time_since_epoch());
-    return std::chrono::milliseconds{MultiplyHigh(GetUptime(), ms_rdtsc_factor)};
-}
-
-s64 WallClock::GetCNTPCT() const {
-    if (invariant)
-        return GetUptime() * NsToCNTPCTRatio::num / NsToCNTPCTRatio::den;
-    return MultiplyHigh(GetUptime(), cntpct_rdtsc_factor);
-}
-
-s64 WallClock::GetGPUTick() const {
-    if (invariant)
-        return GetUptime() * NsToGPUTickRatio::num / NsToGPUTickRatio::den;
-    return MultiplyHigh(GetUptime(), gputick_rdtsc_factor);
-}
-
-s64 WallClock::GetUptime() const {
-    if (invariant)
-        return std::chrono::duration_cast<std::chrono::nanoseconds>(std::chrono::steady_clock::now().time_since_epoch()).count();
-    return s64(Common::X64::FencedRDTSC());
-}
-
-bool WallClock::IsNative() const {
-    if (invariant)
-        return false;
-    return true;
-}
-#elif defined(HAS_NCE)
-namespace {
-
-[[nodiscard]] WallClock::FactorType GetFixedPointFactor(u64 num, u64 den) noexcept {
-    return (WallClock::FactorType(num) << 64) / den;
-}
-
-[[nodiscard]] u64 MultiplyHigh(u64 m, WallClock::FactorType factor) noexcept {
-    return static_cast<u64>((m * factor) >> 64);
-}
-
-[[nodiscard]] s64 GetHostCNTFRQ() noexcept {
-    u64 cntfrq_el0 = 0;
-#ifdef ANDROID
-    std::string_view board{""};
-    char buffer[PROP_VALUE_MAX];
-    int len{__system_property_get("ro.product.board", buffer)};
-    board = std::string_view(buffer, static_cast<size_t>(len));
-    if (board == "s5e9925") { // Exynos 2200
-        cntfrq_el0 = 25600000;
-    } else if (board == "exynos2100") { // Exynos 2100
-        cntfrq_el0 = 26000000;
-    } else if (board == "exynos9810") { // Exynos 9810
-        cntfrq_el0 = 26000000;
-    } else if (board == "s5e8825") { // Exynos 1280
-        cntfrq_el0 = 26000000;
-    } else {
-        asm volatile("mrs %[cntfrq_el0], cntfrq_el0" : [cntfrq_el0] "=r"(cntfrq_el0));
+    std::chrono::nanoseconds GetTimeNS() const override {
+        return std::chrono::duration_cast<std::chrono::nanoseconds>(
+            std::chrono::system_clock::now().time_since_epoch());
    }
-    return cntfrq_el0;
-#else
-    asm volatile("mrs %[cntfrq_el0], cntfrq_el0" : [cntfrq_el0] "=r"(cntfrq_el0));
-    return cntfrq_el0;
-#endif
-}

-} // namespace
+    std::chrono::microseconds GetTimeUS() const override {
+        return std::chrono::duration_cast<std::chrono::microseconds>(
+            std::chrono::system_clock::now().time_since_epoch());
+    }

-WallClock::WallClock(bool invariant_, u64 rdtsc_frequency_) noexcept {
-    const u64 host_cntfrq = std::max<u64>(GetHostCNTFRQ(), 1);
-    ns_cntfrq_factor = GetFixedPointFactor(NsRatio::den, host_cntfrq);
-    us_cntfrq_factor = GetFixedPointFactor(UsRatio::den, host_cntfrq);
-    ms_cntfrq_factor = GetFixedPointFactor(MsRatio::den, host_cntfrq);
-    guest_cntfrq_factor = GetFixedPointFactor(CNTFRQ, host_cntfrq);
-    gputick_cntfrq_factor = GetFixedPointFactor(GPUTickFreq, host_cntfrq);
-}
+    std::chrono::milliseconds GetTimeMS() const override {
+        return std::chrono::duration_cast<std::chrono::milliseconds>(
+            std::chrono::system_clock::now().time_since_epoch());
+    }

-std::chrono::nanoseconds WallClock::GetTimeNS() const {
-    return std::chrono::nanoseconds{MultiplyHigh(GetUptime(), ns_cntfrq_factor)};
-}
+    s64 GetCNTPCT() const override {
+        return GetUptime() * NsToCNTPCTRatio::num / NsToCNTPCTRatio::den;
+    }

-std::chrono::microseconds WallClock::GetTimeUS() const {
-    return std::chrono::microseconds{MultiplyHigh(GetUptime(), us_cntfrq_factor)};
-}
+    s64 GetGPUTick() const override {
+        return GetUptime() * NsToGPUTickRatio::num / NsToGPUTickRatio::den;
+    }

-std::chrono::milliseconds WallClock::GetTimeMS() const {
-    return std::chrono::milliseconds{MultiplyHigh(GetUptime(), ms_cntfrq_factor)};
-}
+    s64 GetUptime() const override {
+        return std::chrono::duration_cast<std::chrono::nanoseconds>(
+                   std::chrono::steady_clock::now().time_since_epoch())
+            .count();
+    }

-s64 WallClock::GetCNTPCT() const {
-    return MultiplyHigh(GetUptime(), guest_cntfrq_factor);
-}
+    bool IsNative() const override {
+        return false;
+    }
+};

-s64 WallClock::GetGPUTick() const {
-    return MultiplyHigh(GetUptime(), gputick_cntfrq_factor);
-}
-
-s64 WallClock::GetUptime() const {
-    s64 cntvct_el0 = 0;
-    asm volatile(
-        "dsb ish\n\t"
-        "mrs %[cntvct_el0], cntvct_el0\n\t"
-        "dsb ish\n\t"
-        : [cntvct_el0] "=r"(cntvct_el0)
-    );
-    return cntvct_el0;
-}
-
-bool WallClock::IsNative() const {
-    return true;
-}
-#else
-WallClock::WallClock(bool invariant_, u64 rdtsc_frequency_) noexcept {}
-
-std::chrono::nanoseconds WallClock::GetTimeNS() const {
-    return std::chrono::duration_cast<std::chrono::nanoseconds>(std::chrono::system_clock::now().time_since_epoch());
-}
-
-std::chrono::microseconds WallClock::GetTimeUS() const {
-    return std::chrono::duration_cast<std::chrono::microseconds>(std::chrono::system_clock::now().time_since_epoch());
-}
-
-std::chrono::milliseconds WallClock::GetTimeMS() const {
-    return std::chrono::duration_cast<std::chrono::milliseconds>(std::chrono::system_clock::now().time_since_epoch());
-}
-
-s64 WallClock::GetCNTPCT() const {
-    return GetUptime() * NsToCNTPCTRatio::num / NsToCNTPCTRatio::den;
-}
-
-s64 WallClock::GetGPUTick() const {
-    return GetUptime() * NsToGPUTickRatio::num / NsToGPUTickRatio::den;
-}
-
-s64 WallClock::GetUptime() const {
-    return std::chrono::duration_cast<std::chrono::nanoseconds>(std::chrono::steady_clock::now().time_since_epoch()).count();
-}
-
-bool WallClock::IsNative() const {
-    return false;
-}
-#endif
-
-WallClock CreateOptimalClock() noexcept {
+std::unique_ptr<WallClock> CreateOptimalClock() {
 #if defined(ARCHITECTURE_x86_64)
-    auto const& caps = GetCPUCaps();
-    return WallClock(!(caps.invariant_tsc && caps.tsc_frequency >= std::nano::den), std::max<u64>(caps.tsc_frequency, 1));
+    const auto& caps = GetCPUCaps();
+
+    if (caps.invariant_tsc && caps.tsc_frequency >= std::nano::den) {
+        return std::make_unique<X64::NativeClock>(caps.tsc_frequency);
+    } else {
+        // Fallback to StandardWallClock if the hardware TSC
+        // - Is not invariant
+        // - Is not more precise than 1 GHz (1ns resolution)
+        return std::make_unique<StandardWallClock>();
+    }
 #elif defined(HAS_NCE)
-    return WallClock(false, 1);
+    return std::make_unique<Arm64::NativeClock>();
 #else
-    return WallClock(true, 1);
+    return std::make_unique<StandardWallClock>();
 #endif
 }

@@ -1,4 +1,4 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
+// SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
 // SPDX-License-Identifier: GPL-3.0-or-later

 // SPDX-FileCopyrightText: Copyright 2020 yuzu Emulator Project
@@ -20,28 +20,28 @@ public:
    static constexpr u64 GPUTickFreq = 614'400'000;   // GM20B GPU Tick Frequency = 614.4 MHz
    static constexpr u64 CPUTickFreq = 1'020'000'000; // T210/4 A57 CPU Tick Frequency = 1020.0 MHz

-    explicit WallClock(bool invariant, u64 rdtsc_frequency_) noexcept;
+    virtual ~WallClock() = default;

    /// @returns The time in nanoseconds since the construction of this clock.
-    std::chrono::nanoseconds GetTimeNS() const;
+    virtual std::chrono::nanoseconds GetTimeNS() const = 0;

    /// @returns The time in microseconds since the construction of this clock.
-    std::chrono::microseconds GetTimeUS() const;
+    virtual std::chrono::microseconds GetTimeUS() const = 0;

    /// @returns The time in milliseconds since the construction of this clock.
-    std::chrono::milliseconds GetTimeMS() const;
+    virtual std::chrono::milliseconds GetTimeMS() const = 0;

    /// @returns The guest CNTPCT ticks since the construction of this clock.
-    s64 GetCNTPCT() const;
+    virtual s64 GetCNTPCT() const = 0;

    /// @returns The guest GPU ticks since the construction of this clock.
-    s64 GetGPUTick() const;
+    virtual s64 GetGPUTick() const = 0;

    /// @returns The raw host timer ticks since an indeterminate epoch.
-    s64 GetUptime() const;
+    virtual s64 GetUptime() const = 0;

    /// @returns Whether the clock directly uses the host's hardware clock.
-    bool IsNative() const;
+    virtual bool IsNative() const = 0;

    static inline u64 NSToCNTPCT(u64 ns) {
        return ns * NsToCNTPCTRatio::num / NsToCNTPCTRatio::den;
@@ -85,33 +85,8 @@ protected:
    using CPUTickToUsRatio = std::ratio<std::micro::den, CPUTickFreq>;
    using CPUTickToCNTPCTRatio = std::ratio<CNTFRQ, CPUTickFreq>;
    using CPUTickToGPUTickRatio = std::ratio<GPUTickFreq, CPUTickFreq>;
-
-#if defined(ARCHITECTURE_x86_64)
-    bool invariant;
-    u64 rdtsc_frequency;
-    u64 ns_rdtsc_factor;
-    u64 us_rdtsc_factor;
-    u64 ms_rdtsc_factor;
-    u64 cntpct_rdtsc_factor;
-    u64 gputick_rdtsc_factor;
-#elif defined(HAS_NCE)
-public:
-    using FactorType = unsigned __int128;
-
-    FactorType GetGuestCNTFRQFactor() const {
-        return guest_cntfrq_factor;
-    }
-protected:
-    FactorType ns_cntfrq_factor;
-    FactorType us_cntfrq_factor;
-    FactorType ms_cntfrq_factor;
-    FactorType guest_cntfrq_factor;
-    FactorType gputick_cntfrq_factor;
-#else
-
-#endif
 };

-[[nodiscard]] WallClock CreateOptimalClock() noexcept;
+[[nodiscard]] std::unique_ptr<WallClock> CreateOptimalClock();

 } // namespace Common
@@ -0,0 +1,46 @@
+// SPDX-FileCopyrightText: Copyright 2020 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "common/uint128.h"
+#include "common/x64/native_clock.h"
+#include "common/x64/rdtsc.h"
+
+namespace Common::X64 {
+
+NativeClock::NativeClock(u64 rdtsc_frequency_)
+    : rdtsc_frequency{rdtsc_frequency_}, ns_rdtsc_factor{GetFixedPoint64Factor(NsRatio::den,
+                                                                               rdtsc_frequency)},
+      us_rdtsc_factor{GetFixedPoint64Factor(UsRatio::den, rdtsc_frequency)},
+      ms_rdtsc_factor{GetFixedPoint64Factor(MsRatio::den, rdtsc_frequency)},
+      cntpct_rdtsc_factor{GetFixedPoint64Factor(CNTFRQ, rdtsc_frequency)},
+      gputick_rdtsc_factor{GetFixedPoint64Factor(GPUTickFreq, rdtsc_frequency)} {}
+
+std::chrono::nanoseconds NativeClock::GetTimeNS() const {
+    return std::chrono::nanoseconds{MultiplyHigh(GetUptime(), ns_rdtsc_factor)};
+}
+
+std::chrono::microseconds NativeClock::GetTimeUS() const {
+    return std::chrono::microseconds{MultiplyHigh(GetUptime(), us_rdtsc_factor)};
+}
+
+std::chrono::milliseconds NativeClock::GetTimeMS() const {
+    return std::chrono::milliseconds{MultiplyHigh(GetUptime(), ms_rdtsc_factor)};
+}
+
+s64 NativeClock::GetCNTPCT() const {
+    return MultiplyHigh(GetUptime(), cntpct_rdtsc_factor);
+}
+
+s64 NativeClock::GetGPUTick() const {
+    return MultiplyHigh(GetUptime(), gputick_rdtsc_factor);
+}
+
+s64 NativeClock::GetUptime() const {
+    return static_cast<s64>(FencedRDTSC());
+}
+
+bool NativeClock::IsNative() const {
+    return true;
+}
+
+} // namespace Common::X64
@@ -0,0 +1,38 @@
+// SPDX-FileCopyrightText: Copyright 2020 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "common/wall_clock.h"
+
+namespace Common::X64 {
+
+class NativeClock final : public WallClock {
+public:
+    explicit NativeClock(u64 rdtsc_frequency_);
+
+    std::chrono::nanoseconds GetTimeNS() const override;
+
+    std::chrono::microseconds GetTimeUS() const override;
+
+    std::chrono::milliseconds GetTimeMS() const override;
+
+    s64 GetCNTPCT() const override;
+
+    s64 GetGPUTick() const override;
+
+    s64 GetUptime() const override;
+
+    bool IsNative() const override;
+
+private:
+    u64 rdtsc_frequency;
+
+    u64 ns_rdtsc_factor;
+    u64 us_rdtsc_factor;
+    u64 ms_rdtsc_factor;
+    u64 cntpct_rdtsc_factor;
+    u64 gputick_rdtsc_factor;
+};
+
+} // namespace Common::X64
@@ -1,37 +1,13 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: 2016 Citra Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later

 #pragma once

-#include <type_traits>
 #include <bitset>
 #include <initializer_list>
+#include <xbyak/xbyak.h>
 #include "common/assert.h"

-// xbyak hates human beings
-#ifdef __GNUC__
-#pragma GCC diagnostic ignored "-Wconversion"
-#pragma GCC diagnostic ignored "-Wshadow"
-#endif
-#ifdef __clang__
-#pragma clang diagnostic ignored "-Wconversion"
-#pragma clang diagnostic ignored "-Wshadow"
-#endif
-
-// You must ensure this matches with src/common/x64/xbyak.h on root dir
-#include <ankerl/unordered_dense.h>
-#include <boost/unordered_map.hpp>
-#define XBYAK_STD_UNORDERED_SET ankerl::unordered_dense::set
-#define XBYAK_STD_UNORDERED_MAP ankerl::unordered_dense::map
-#define XBYAK_STD_UNORDERED_MULTIMAP boost::unordered_multimap
-#include <xbyak/xbyak.h>
-#include <xbyak/xbyak_util.h>
-
-#include <xbyak/xbyak.h>
-
 namespace Common::X64 {

 constexpr size_t RegToIndex(const Xbyak::Reg& reg) {
@@ -198,13 +174,12 @@ inline ABIFrameInfo ABI_CalculateFrameSize(std::bitset<32> regs, size_t rsp_alig
    rsp_alignment -= subtraction;
    subtraction += rsp_alignment & 0xF;

-    return ABIFrameInfo{
-        s32(subtraction),
-        s32(subtraction - xmm_base_subtraction)
-    };
+    return ABIFrameInfo{static_cast<s32>(subtraction),
+                        static_cast<s32>(subtraction - xmm_base_subtraction)};
 }

-inline size_t ABI_PushRegistersAndAdjustStack(Xbyak::CodeGenerator& code, std::bitset<32> regs, size_t rsp_alignment, size_t needed_frame_size = 0) {
+inline size_t ABI_PushRegistersAndAdjustStack(Xbyak::CodeGenerator& code, std::bitset<32> regs,
+                                              size_t rsp_alignment, size_t needed_frame_size = 0) {
    auto frame_info = ABI_CalculateFrameSize(regs, rsp_alignment, needed_frame_size);

    for (size_t i = 0; i < regs.size(); ++i) {
@@ -227,7 +202,8 @@ inline size_t ABI_PushRegistersAndAdjustStack(Xbyak::CodeGenerator& code, std::b
    return ABI_SHADOW_SPACE;
 }

-inline void ABI_PopRegistersAndAdjustStack(Xbyak::CodeGenerator& code, std::bitset<32> regs, size_t rsp_alignment, size_t needed_frame_size = 0) {
+inline void ABI_PopRegistersAndAdjustStack(Xbyak::CodeGenerator& code, std::bitset<32> regs,
+                                           size_t rsp_alignment, size_t needed_frame_size = 0) {
    auto frame_info = ABI_CalculateFrameSize(regs, rsp_alignment, needed_frame_size);

    for (size_t i = 0; i < regs.size(); ++i) {
@@ -250,38 +226,4 @@ inline void ABI_PopRegistersAndAdjustStack(Xbyak::CodeGenerator& code, std::bits
    }
 }

-// Constants for use with cmpps/cmpss
-enum {
-    CMP_EQ = 0,
-    CMP_LT = 1,
-    CMP_LE = 2,
-    CMP_UNORD = 3,
-    CMP_NEQ = 4,
-    CMP_NLT = 5,
-    CMP_NLE = 6,
-    CMP_ORD = 7,
-};
-
-constexpr bool IsWithin2G(uintptr_t ref, uintptr_t target) {
-    const u64 distance = target - (ref + 5);
-    return !(distance >= 0x8000'0000ULL && distance <= ~0x8000'0000ULL);
-}
-
-inline bool IsWithin2G(const Xbyak::CodeGenerator& code, uintptr_t target) {
-    return IsWithin2G(reinterpret_cast<uintptr_t>(code.getCurr()), target);
-}
-
-template <typename T>
-inline void CallFarFunction(Xbyak::CodeGenerator& code, const T f) {
-    static_assert(std::is_pointer_v<T>, "Argument must be a (function) pointer.");
-    size_t addr = reinterpret_cast<size_t>(f);
-    if (IsWithin2G(code, addr)) {
-        code.call(f);
-    } else {
-        // ABI_RETURN is a safe temp register to use before a call
-        code.mov(ABI_RETURN, addr);
-        code.call(ABI_RETURN);
-    }
-}
-
 } // namespace Common::X64
@@ -0,0 +1,46 @@
+// SPDX-FileCopyrightText: 2016 Citra Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include <type_traits>
+#include <xbyak/xbyak.h>
+#include "common/x64/xbyak_abi.h"
+
+namespace Common::X64 {
+
+// Constants for use with cmpps/cmpss
+enum {
+    CMP_EQ = 0,
+    CMP_LT = 1,
+    CMP_LE = 2,
+    CMP_UNORD = 3,
+    CMP_NEQ = 4,
+    CMP_NLT = 5,
+    CMP_NLE = 6,
+    CMP_ORD = 7,
+};
+
+constexpr bool IsWithin2G(uintptr_t ref, uintptr_t target) {
+    const u64 distance = target - (ref + 5);
+    return !(distance >= 0x8000'0000ULL && distance <= ~0x8000'0000ULL);
+}
+
+inline bool IsWithin2G(const Xbyak::CodeGenerator& code, uintptr_t target) {
+    return IsWithin2G(reinterpret_cast<uintptr_t>(code.getCurr()), target);
+}
+
+template <typename T>
+inline void CallFarFunction(Xbyak::CodeGenerator& code, const T f) {
+    static_assert(std::is_pointer_v<T>, "Argument must be a (function) pointer.");
+    size_t addr = reinterpret_cast<size_t>(f);
+    if (IsWithin2G(code, addr)) {
+        code.call(f);
+    } else {
+        // ABI_RETURN is a safe temp register to use before a call
+        code.mov(ABI_RETURN, addr);
+        code.call(ABI_RETURN);
+    }
+}
+
+} // namespace Common::X64
@@ -113,7 +113,8 @@ void DynarmicCallbacks32::CallSVC(u32 swi) {
 }

 void DynarmicCallbacks32::AddTicks(u64 ticks) {
-    ASSERT(!m_parent.m_uses_wall_clock && "Dynarmic ticking disabled");
+    ASSERT_MSG(!m_parent.m_uses_wall_clock, "Dynarmic ticking disabled");
+
    // Divide the number of ticks by the amount of CPU cores. TODO(Subv): This yields only a
    // rough approximation of the amount of executed ticks in the system, it may be thrown off
    // if not all cores are doing a similar amount of work. Instead of doing this, we should
@@ -122,12 +123,14 @@ void DynarmicCallbacks32::AddTicks(u64 ticks) {
    u64 amortized_ticks = ticks / Core::Hardware::NUM_CPU_CORES;
    // Always execute at least one tick.
    amortized_ticks = std::max<u64>(amortized_ticks, 1);
+
    m_parent.m_system.CoreTiming().AddTicks(amortized_ticks);
 }

 u64 DynarmicCallbacks32::GetTicksRemaining() {
-    ASSERT(!m_parent.m_uses_wall_clock && "Dynarmic ticking disabled");
-    return std::max<s64>(m_parent.m_system.CoreTiming().downcount, 0);
+    ASSERT_MSG(!m_parent.m_uses_wall_clock, "Dynarmic ticking disabled");
+
+    return std::max<s64>(m_parent.m_system.CoreTiming().GetDowncount(), 0);
 }

 bool DynarmicCallbacks32::CheckMemoryAccess(u64 addr, u64 size, Kernel::DebugWatchpointType type) {
@@ -36,7 +36,7 @@ public:
    u64 MemoryRead64(u32 vaddr) override;
    std::optional<u32> MemoryReadCode(u32 vaddr) override;
    void InstructionSynchronizationBarrierRaised() override {
-        last_code_addr = u64(-1); //reset back, force refetch
+        last_code_addr = 0; //reset back, force refetch
    }
    void MemoryWrite8(u32 vaddr, u8 value) override;
    void MemoryWrite16(u32 vaddr, u16 value) override;
@@ -54,7 +54,7 @@ public:
    void ReturnException(u32 pc, Dynarmic::HaltReason hr);
    //
    Dynarmic::CodePage cached_code_page;
-    u64 last_code_addr = u64(-1);
+    u64 last_code_addr = 0;
    ArmDynarmic32& m_parent;
    Core::Memory::Memory& m_memory;
    Kernel::KProcess* m_process{};
@@ -45,6 +45,7 @@ Dynarmic::A64::Vector DynarmicCallbacks64::MemoryRead128(u64 vaddr) {
 std::optional<u32> DynarmicCallbacks64::MemoryReadCode(u64 vaddr) {
    if (!m_memory.IsValidVirtualAddressRange(vaddr, sizeof(u32)))
        return std::nullopt;
+//    return m_memory.Read32(vaddr);
    auto const aligned_vaddr = vaddr & ~Core::Memory::YUZU_PAGEMASK;
    if (last_code_addr != aligned_vaddr) {
        m_memory.ReadBlock(aligned_vaddr, &cached_code_page, sizeof(cached_code_page));
@@ -102,7 +103,6 @@ bool DynarmicCallbacks64::MemoryWriteExclusive128(u64 vaddr, Dynarmic::A64::Vect
 }

 void DynarmicCallbacks64::InstructionCacheOperationRaised(Dynarmic::A64::InstructionCacheOperation op, u64 value) {
-    last_code_addr = u64(-1); //invalidate cached page
    switch (op) {
    case Dynarmic::A64::InstructionCacheOperation::InvalidateByVAToPoU: {
        static constexpr u64 ICACHE_LINE_SIZE = 64;
@@ -128,7 +128,7 @@ void DynarmicCallbacks64::ExceptionRaised(u64 pc, Dynarmic::A64::Exception excep
    case Dynarmic::A64::Exception::SendEvent:
    case Dynarmic::A64::Exception::SendEventLocal:
    case Dynarmic::A64::Exception::Yield:
-        LOG_TRACE(Core_ARM, "ExceptionRaised(exception = {}, pc = {:08X}, code = {:08X}, cached = {:08X})", std::size_t(exception), pc, m_memory.Read32(pc), MemoryReadCode(pc).value_or(0));
+        LOG_TRACE(Core_ARM, "ExceptionRaised(exception = {}, pc = {:08X}, code = {:08X})", static_cast<std::size_t>(exception), pc, m_memory.Read32(pc));
        return;
    case Dynarmic::A64::Exception::NoExecuteFault:
        LOG_CRITICAL(Core_ARM, "Cannot execute instruction at unmapped address {:#016x}", pc);
@@ -150,7 +150,8 @@ void DynarmicCallbacks64::CallSVC(u32 svc) {
 }

 void DynarmicCallbacks64::AddTicks(u64 ticks) {
-    ASSERT(!m_parent.m_uses_wall_clock && "Dynarmic ticking disabled");
+    ASSERT_MSG(!m_parent.m_uses_wall_clock, "Dynarmic ticking disabled");
+
    // Divide the number of ticks by the amount of CPU cores. TODO(Subv): This yields only a
    // rough approximation of the amount of executed ticks in the system, it may be thrown off
    // if not all cores are doing a similar amount of work. Instead of doing this, we should
@@ -159,12 +160,13 @@ void DynarmicCallbacks64::AddTicks(u64 ticks) {
    u64 amortized_ticks = ticks / Core::Hardware::NUM_CPU_CORES;
    // Always execute at least one tick.
    amortized_ticks = std::max<u64>(amortized_ticks, 1);
+
    m_parent.m_system.CoreTiming().AddTicks(amortized_ticks);
 }

 u64 DynarmicCallbacks64::GetTicksRemaining() {
    ASSERT(!m_parent.m_uses_wall_clock && "Dynarmic ticking disabled");
-    return std::max<s64>(m_parent.m_system.CoreTiming().downcount, 0);
+    return std::max<s64>(m_parent.m_system.CoreTiming().GetDowncount(), 0);
 }

 u64 DynarmicCallbacks64::GetCNTPCT() {
@@ -43,7 +43,7 @@ public:
    Dynarmic::A64::Vector MemoryRead128(u64 vaddr) override;
    std::optional<u32> MemoryReadCode(u64 vaddr) override;
    void InstructionSynchronizationBarrierRaised() override {
-        last_code_addr = u64(-1); //reset back, force refetch
+        last_code_addr = 0; //reset back, force refetch
    }
    void MemoryWrite8(u64 vaddr, u8 value) override;
    void MemoryWrite16(u64 vaddr, u16 value) override;
@@ -65,7 +65,7 @@ public:
    void ReturnException(u64 pc, Dynarmic::HaltReason hr);

    Dynarmic::CodePage cached_code_page;
-    u64 last_code_addr = u64(-1);
+    u64 last_code_addr = 0;
    ArmDynarmic64& m_parent;
    Core::Memory::Memory& m_memory;
    u64 m_tpidrro_el0{};
@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: Copyright 2018 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later

@@ -10,30 +7,28 @@
 namespace Core {

 DynarmicExclusiveMonitor::DynarmicExclusiveMonitor(Memory::Memory& memory_, std::size_t core_count_)
-    : monitor{}
-    , memory{memory_}
-{}
+    : monitor{core_count_}, memory{memory_} {}

 DynarmicExclusiveMonitor::~DynarmicExclusiveMonitor() = default;

 u8 DynarmicExclusiveMonitor::ExclusiveRead8(std::size_t core_index, VAddr addr) {
-    return monitor.ReadAndMark<u8>(core_index, addr, [=]() -> u8 { return memory.Read8(addr); });
+    return monitor.ReadAndMark<u8>(core_index, addr, [&]() -> u8 { return memory.Read8(addr); });
 }

 u16 DynarmicExclusiveMonitor::ExclusiveRead16(std::size_t core_index, VAddr addr) {
-    return monitor.ReadAndMark<u16>(core_index, addr, [=]() -> u16 { return memory.Read16(addr); });
+    return monitor.ReadAndMark<u16>(core_index, addr, [&]() -> u16 { return memory.Read16(addr); });
 }

 u32 DynarmicExclusiveMonitor::ExclusiveRead32(std::size_t core_index, VAddr addr) {
-    return monitor.ReadAndMark<u32>(core_index, addr, [=]() -> u32 { return memory.Read32(addr); });
+    return monitor.ReadAndMark<u32>(core_index, addr, [&]() -> u32 { return memory.Read32(addr); });
 }

 u64 DynarmicExclusiveMonitor::ExclusiveRead64(std::size_t core_index, VAddr addr) {
-    return monitor.ReadAndMark<u64>(core_index, addr, [=]() -> u64 { return memory.Read64(addr); });
+    return monitor.ReadAndMark<u64>(core_index, addr, [&]() -> u64 { return memory.Read64(addr); });
 }

 u128 DynarmicExclusiveMonitor::ExclusiveRead128(std::size_t core_index, VAddr addr) {
-    return monitor.ReadAndMark<u128>(core_index, addr, [=]() -> u128 {
+    return monitor.ReadAndMark<u128>(core_index, addr, [&]() -> u128 {
        u128 result;
        result[0] = memory.Read64(addr);
        result[1] = memory.Read64(addr + 8);
@@ -46,31 +41,31 @@ void DynarmicExclusiveMonitor::ClearExclusive(std::size_t core_index) {
 }

 bool DynarmicExclusiveMonitor::ExclusiveWrite8(std::size_t core_index, VAddr vaddr, u8 value) {
-    return monitor.DoExclusiveOperation<u8>(core_index, vaddr, [=](u8 expected) -> bool {
+    return monitor.DoExclusiveOperation<u8>(core_index, vaddr, [&](u8 expected) -> bool {
        return memory.WriteExclusive8(vaddr, value, expected);
    });
 }

 bool DynarmicExclusiveMonitor::ExclusiveWrite16(std::size_t core_index, VAddr vaddr, u16 value) {
-    return monitor.DoExclusiveOperation<u16>(core_index, vaddr, [=](u16 expected) -> bool {
+    return monitor.DoExclusiveOperation<u16>(core_index, vaddr, [&](u16 expected) -> bool {
        return memory.WriteExclusive16(vaddr, value, expected);
    });
 }

 bool DynarmicExclusiveMonitor::ExclusiveWrite32(std::size_t core_index, VAddr vaddr, u32 value) {
-    return monitor.DoExclusiveOperation<u32>(core_index, vaddr, [=](u32 expected) -> bool {
+    return monitor.DoExclusiveOperation<u32>(core_index, vaddr, [&](u32 expected) -> bool {
        return memory.WriteExclusive32(vaddr, value, expected);
    });
 }

 bool DynarmicExclusiveMonitor::ExclusiveWrite64(std::size_t core_index, VAddr vaddr, u64 value) {
-    return monitor.DoExclusiveOperation<u64>(core_index, vaddr, [=](u64 expected) -> bool {
+    return monitor.DoExclusiveOperation<u64>(core_index, vaddr, [&](u64 expected) -> bool {
        return memory.WriteExclusive64(vaddr, value, expected);
    });
 }

 bool DynarmicExclusiveMonitor::ExclusiveWrite128(std::size_t core_index, VAddr vaddr, u128 value) {
-    return monitor.DoExclusiveOperation<u128>(core_index, vaddr, [=](u128 expected) -> bool {
+    return monitor.DoExclusiveOperation<u128>(core_index, vaddr, [&](u128 expected) -> bool {
        return memory.WriteExclusive128(vaddr, value, expected);
    });
 }
@@ -761,7 +761,8 @@ bool InterpreterVisitor::LDR_reg_fpsimd(Imm<2> size, Imm<1> opc_1, Reg Rm, Imm<3
    return this->SIMDOffset(scale, shift, opc_0, Rm, option, Rn, Vt);
 }

-std::optional<u64> MatchAndExecuteOneInstruction(Core::Memory::Memory& memory, mcontext_t* context, fpsimd_context* fpsimd_context) {
+std::optional<u64> MatchAndExecuteOneInstruction(Core::Memory::Memory& memory, mcontext_t* context,
+                                                 fpsimd_context* fpsimd_context) {
    std::span<u64, 31> regs(reinterpret_cast<u64*>(context->regs), 31);
    std::span<u128, 32> vregs(reinterpret_cast<u128*>(fpsimd_context->vregs), 32);
    u64& sp = *reinterpret_cast<u64*>(&context->sp);
@@ -771,9 +772,9 @@ std::optional<u64> MatchAndExecuteOneInstruction(Core::Memory::Memory& memory, m
    u32 instruction = memory.Read32(pc);
    bool was_executed = false;

-    auto decoder = Dynarmic::A64::Decode<VisitorBase, bool>(visitor, instruction);
+    auto decoder = Dynarmic::A64::Decode<VisitorBase>(instruction);
    if (decoder) {
-        was_executed = *decoder;
+        was_executed = decoder->get().call(visitor, instruction);
    } else {
        was_executed = false;
    }
@@ -3,7 +3,7 @@

 #include <numeric>
 #include <bit>
-#include "common/wall_clock.h"
+#include "common/arm64/native_clock.h"
 #include "common/alignment.h"
 #include "common/literals.h"
 #include "core/arm/nce/arm_nce.h"
@@ -578,11 +578,7 @@ void Patcher::WriteMsrHandler(ModuleDestLabel module_dest, oaknut::XReg src_reg,
 }

 void Patcher::WriteCntpctHandler(ModuleDestLabel module_dest, oaknut::XReg dest_reg, oaknut::VectorCodeGenerator& cg) {
-#if defined(HAS_NCE)
-    static Common::WallClock clock(false, 1);
-#else
-    static Common::WallClock clock(true, 1);
-#endif
+    static Common::Arm64::NativeClock clock{};
    const auto factor = clock.GetGuestCNTFRQFactor();
    const auto raw_factor = std::bit_cast<std::array<u64, 2>>(factor);

@@ -1,6 +1,3 @@
-// SPDX-FileCopyrightText: Copyright 2026 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
-
 // SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
 // SPDX-License-Identifier: GPL-2.0-or-later

@@ -16,111 +13,117 @@ using namespace Common::ELF;
 namespace Core {
 namespace Symbols {

-struct ModuleHeaderLocation {
-    u32 version;
-    u32 header_offset;
-    u32 version_offset;
-};
-static_assert(sizeof(ModuleHeaderLocation) == 0x0C);
-struct ModuleHeader {
-    u32 signature;
-    u32 dynamic_offset;
-    u32 bss_start_offset;
-    u32 bss_end_offset;
-    u32 exception_info_start_offset;
-    u32 exception_info_end_offset;
-    u32 module_offset;
-    u32 relro_start_offset;
-    u32 full_relro_end_offset;
-    u32 nx_debug_link_start_offset;
-    u32 nx_debug_link_end_offset;
-    u32 note_gnu_build_id_start_offset;
-    u32 note_gnu_build_id_end_offset;
-};
-static_assert(sizeof(ModuleHeader) == 0x34);
-
-struct Mod32 {
-    using Sym = Elf32_Sym;
-    using Dyn = Elf32_Dyn;
-};
-struct Mod64 {
-    using Sym = Elf64_Sym;
-    using Dyn = Elf64_Dyn;
-};
-
-template <typename M, typename F>
-static Symbols GetSymbols(F&& ReadBytes) {
-    const auto Read8 = [&](u64 index) {
+template <typename Word, typename ELFSymbol, typename ByteReader>
+static Symbols GetSymbols(ByteReader ReadBytes) {
+    const auto Read8{[&](u64 index) {
        u8 ret;
        ReadBytes(&ret, index, sizeof(u8));
        return ret;
-    };
-    ModuleHeaderLocation loc{};
-    ReadBytes(&loc, 0, sizeof(ModuleHeaderLocation));
-    ModuleHeader hdr;
-    ReadBytes(&hdr, loc.header_offset, sizeof(ModuleHeader));
-    if (hdr.signature != Common::MakeMagic('M', 'O', 'D', '0')) {
+    }};
+
+    const auto Read32{[&](u64 index) {
+        u32 ret;
+        ReadBytes(&ret, index, sizeof(u32));
+        return ret;
+    }};
+
+    const auto ReadWord{[&](u64 index) {
+        Word ret;
+        ReadBytes(&ret, index, sizeof(Word));
+        return ret;
+    }};
+
+    const u32 mod_offset = Read32(4);
+
+    if (Read32(mod_offset) != Common::MakeMagic('M', 'O', 'D', '0')) {
        return {};
    }

-    VAddr strtab_offs{};
-    VAddr symtab_offs{};
-    u64 syment_size = sizeof(typename M::Sym);
-    VAddr dynamic_offset = loc.header_offset + hdr.dynamic_offset;
+    VAddr string_table_offset{};
+    VAddr symbol_table_offset{};
+    u64 symbol_entry_size{};
+
+    const auto dynamic_offset = Read32(mod_offset + 0x4) + mod_offset;
+
+    VAddr dynamic_index = dynamic_offset;
    while (true) {
-        typename M::Dyn dyn;
-        ReadBytes(&dyn, dynamic_offset, sizeof(typename M::Dyn));
-        dynamic_offset += sizeof(typename M::Dyn);
-        if (dyn.d_tag == ElfDtNull) {
+        const Word tag = ReadWord(dynamic_index);
+        const Word value = ReadWord(dynamic_index + sizeof(Word));
+        dynamic_index += 2 * sizeof(Word);
+
+        if (tag == ElfDtNull) {
            break;
        }
-        if (dyn.d_tag == ElfDtStrtab) {
-            strtab_offs = dyn.d_un.d_ptr;
-        } else if (dyn.d_tag == ElfDtSymtab) {
-            symtab_offs = dyn.d_un.d_ptr;
-        } else if (dyn.d_tag == ElfDtSyment) {
-            syment_size = dyn.d_un.d_val;
+
+        if (tag == ElfDtStrtab) {
+            string_table_offset = value;
+        } else if (tag == ElfDtSymtab) {
+            symbol_table_offset = value;
+        } else if (tag == ElfDtSyment) {
+            symbol_entry_size = value;
        }
    }
-    if (strtab_offs > 0 && symtab_offs > 0) {
-        Symbols out;
-        VAddr symbol_index = symtab_offs;
-        while (symbol_index < strtab_offs) {
-            typename M::Sym symbol{};
-            ReadBytes(&symbol, symbol_index, sizeof(typename M::Sym));
-            VAddr offs = strtab_offs + symbol.st_name;
-            std::string name{};
-            for (u8 c = Read8(offs); c != 0; c = Read8(++offs))
-                name += char(c);
-            symbol_index += syment_size;
-            out[name] = std::make_pair(symbol.st_value, symbol.st_size);
-        }
-        return out;
+
+    if (string_table_offset == 0 || symbol_table_offset == 0 || symbol_entry_size == 0) {
+        return {};
    }
-    return {};
+
+    Symbols out;
+
+    VAddr symbol_index = symbol_table_offset;
+    while (symbol_index < string_table_offset) {
+        ELFSymbol symbol{};
+        ReadBytes(&symbol, symbol_index, sizeof(ELFSymbol));
+
+        VAddr string_offset = string_table_offset + symbol.st_name;
+        std::string name;
+        for (u8 c = Read8(string_offset); c != 0; c = Read8(++string_offset)) {
+            name += static_cast<char>(c);
+        }
+
+        symbol_index += symbol_entry_size;
+        out[name] = std::make_pair(symbol.st_value, symbol.st_size);
+    }
+
+    return out;
 }

 Symbols GetSymbols(VAddr base, Core::Memory::Memory& memory, bool is_64) {
-    const auto f = [base, &memory](void* ptr, size_t offset, size_t size) {
-        memory.ReadBlock(base + offset, ptr, size);
-    };
-    return is_64 ? GetSymbols<Mod64>(f) : GetSymbols<Mod32>(f);
+    const auto ReadBytes{
+        [&](void* ptr, size_t offset, size_t size) { memory.ReadBlock(base + offset, ptr, size); }};
+
+    if (is_64) {
+        return GetSymbols<u64, Elf64_Sym>(ReadBytes);
+    } else {
+        return GetSymbols<u32, Elf32_Sym>(ReadBytes);
+    }
 }

 Symbols GetSymbols(std::span<const u8> data, bool is_64) {
-    const auto f = [data](void* ptr, size_t offset, size_t size) {
+    const auto ReadBytes{[&](void* ptr, size_t offset, size_t size) {
        std::memcpy(ptr, data.data() + offset, size);
-    };
-    return is_64 ? GetSymbols<Mod64>(f) : GetSymbols<Mod32>(f);
+    }};
+
+    if (is_64) {
+        return GetSymbols<u64, Elf64_Sym>(ReadBytes);
+    } else {
+        return GetSymbols<u32, Elf32_Sym>(ReadBytes);
+    }
 }

 std::optional<std::string> GetSymbolName(const Symbols& symbols, VAddr addr) {
-    const auto it = std::find_if(symbols.cbegin(), symbols.cend(), [addr](const auto& e) {
-        auto const [start, size] = e.second;
-        auto const end = start + size;
-        return addr >= start && addr < end;
+    const auto iter = std::find_if(symbols.cbegin(), symbols.cend(), [addr](const auto& pair) {
+        const auto& [name, sym_info] = pair;
+        const auto& [start_address, size] = sym_info;
+        const auto end_address = start_address + size;
+        return addr >= start_address && addr < end_address;
    });
-    return it != symbols.cend() ? std::optional<std::string>{it->first} : std::nullopt;
+
+    if (iter == symbols.cend()) {
+        return std::nullopt;
+    }
+
+    return iter->first;
 }

 } // namespace Symbols
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
PavelBARABANOV	2075192111	fix qcom	2026-05-01 18:09:51 +03:00
PavelBARABANOV	78a762c4d0	fix applet	2026-05-01 18:09:24 +03:00